Castrol Brayco 599 - Preservation Oil - 8765
Rust preventative concentrate
Concentrate product for addition into MIL-PRF-23699F lubricants meeting GE D50TF6-S1
ISO Viscosity and pack sizes available
BRAYCO 599 - 12X8 ounce tin & 55GAL/US/LS
Brayco 599 is a specially designed synthetic base, dark amber, corrosion preservative additive concentrate.
Brayco 599 is designed for use as an additive for turbine engines and helicopter transmissions which use MIL-PRF-23699F lubricating oil. Brayco 599 should be added to the oil sump immediately after an oil change when the equipment is intended to be placed in storage, especially in locations where high humidity and salt spray are present. The corrosion inhibited oil should be capable of limited use, not to exceed 25 hours. Consult the engine manufacturer's manual to determine specific engine model recommendations and/or limitations.
To receive full protection for extended equipment storage, Castrol recommends addition of Brayco 599 in concentrations between 10% and 15% by volume. Lower concentrations between 5% and 10%, may be suitable for some component storage applications depending upon storage conditions and length of storage. Consult the engine manufacturer's maintenance manual or service bulletin to determine specific engine model dilution ratio recommendations. For use in MIL-PRF-23699F synthetic turbine oils at 10-15% volume addition for storage.
Meets the requirements of General Electric Aircraft Engine Group Specification D50TF6-S1.
• Approved grade - Corrosion preventative/limited use engine lubricant