Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Compressor Oils

Total Lunaria SK 100 - Compressor Oil - 112474

Total Lunaria SK 100 - Compressor Oil - 112474

 

Alkylbenzene synthetic oils for refrigerating compressors.

 

Applications:

  • LUNARIA SK is a quality refrigeration compressors lubricant using CFC or HCFC refrigerants. Due to their chemical nature, these oils have superior miscibility with fluorocarbon refrigerant such as R12, R502 and R22 and are thus perfectly adapted to the low temperatures.
  • LUNARIA SK is also suitable for the cylinder lubrication of heavy duty reciprocating air compressors (discharge temperature > 200 °C).

 

Specifications:

OEM Approvals - APV, BITZER, BOCK, SABROE, YORK, REFCOMP.

 

Advantages:

  • LUNARIA SK provides high chemical stability with refrigerants, low foaming tendency and excellent lubrication properties.
  • LUNARIA SK has very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (down to – 60 °C at the evaporator).

 

CAUTION: Deposits may clog filters when shifting from a mineral oil to a synthetic alkylbenzene oil during initial runs.

 

Pack sizes available - 20L

Discover More +
Total Dacnis SH 100 - PAO Synthetic oils for rotary air compressors - 112593

Total Dacnis SH 100 - PAO Synthetic oils for rotary air compressors - 112593

 

Applications:

Lubrication and cooling of the following types of air compressors:

  • Rotary screw compressors (ISO VG 32, 46, 68)
  • Reciprocating compressors (ISO VG 100).

Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.

 

Specifications:

  • ISO 6743 classified DAJ for heavy duty applications.

 

Advantages:

The properties of DACNIS SH:

  • Avoids the carbon build up
  • Allows a good oil/air and oil/condensates separation
  • Protects the screws against wear and corrosion.

The use of DACNIS SH allows real cuts in the operating costs of the compressed air production facility by:

  • Optimising the compressor efficiency
  • Extending the drain intervals. The possible achieved drain intervals can be:

                 - from 4000 to 6000 hours for fixed compressors in standard use
                 - up to 8000 hours with lubricant analysis monitoring.

  • Extending the service life of the separating filter elements. The DACNIS SH have an anti-clogging property that ensures the efficiency of the filters during a long period (up to 8000 hours).

 

Pack sizes available - 20L

Discover More +
Total Dacnis SE 100 - Synthetic ester oils for air compressors - 120658

Total Dacnis SE 100 - Synthetic ester oils for air compressors - 120658

 

Applications:

DACNIS SE is a high performance lubricant developed for lubrication and cooling of the following types of air compressors:
- high pressure reciprocating air compressor (ISO VG 100)
- screw and rotary vane air compressor (ISO VG 46, 68 or 100)
- turbocompressors (ISO VG 68)
- vacuum pumps (ISO VG 100).

 

Specifications:

  • ISO 6743 classified DAC and DAJ for heavy duty applications.
  • DACNIS SE meets the DIN 51 506 VDL requirements.

 

Advantages:

  • Excellent thermal stability of the lubricant under high temperature conditions.
  • Low foaming tendency for turbocompressor applications.
  • Low volatility.
  • Low vanish and carbon deposits.
  • Protection against rust and corrosion.
  • Compressor start up by - 20°C.
  • Operating conditions at discharge temperature up to 250°C and discharge pressure up to 200 bars.

 

Pack sizes available - 20L drums, 208L drums

Discover More +
Total Dacnis 100 - Compressor Oil - 162124

Total Dacnis 100 - Compressor Oil - 162124

 

Mineral oils for rotary and reciprocating air compressors.

 

Applications:

  • Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

                - For screw compressors - DACNIS 32, 46, or 68
                - For reciprocating compressors - DACNIS 68, 100 or 150.

  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

 

Specifications:

  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE…

 

Advantages:

  • The properties of DACNIS:

                     - avoid the carbon build up
                     - allow a good oil/air and oil/condensates separation
                     - protect components against wear and corrosion.

  • The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency.
  • Extending the service life of the separating filter elements. The DACNIS oils have an anticlogging property that ensures the efficiency of the filters during a long period.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +
Castrol Aircol SN 100 - Synthetic Air Compressor Lubricant - 2162

Castrol Aircol SN 100 - Synthetic Air Compressor Lubricant - 2162

 

Castrol Aircol SN compressor lubricants are high quality synthetic diesters. For use in all types of air compressor, especially reciprocating and rotary screw compressors operating under severe or normal conditions.

 

Application

Castrol Aircol SN compressor lubricants were developed to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer much reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

 

ISO Viscosity and pack sizes available
AIRCOL SN 68 - 20L
AIRCOL SN 100 - 20L

Discover More +
Castrol Aircol PD 100 - Air compressor lubricants - 2168

Castrol Aircol PD 100 - Air compressor lubricants - 2168

 

Castrol Aircol PD oils are a range of compressor oils, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors. For lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.

 

Application

The Castrol Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with delivery temperatures of up to 120°C. Castrol Aircol PD compressor oils have excellent oxidation resistance and low carbon forming tendencies and meet the requirements of the DIN 51506 VD-L classification of lubricants for compressors having air discharge temperatures up to 220ºC. Castrol Aircol PD compressor oils also have sufficient anti-wear performance, as measured in the FZG Gear Test, to allow their use in certain screw compressors where drive between the screws is transmitted by the rotor faces themselves. The modern tendency in air compressor design is towards higher capacities from smaller units, with higher loads and temperatures leading to greater demands upon the lubricant.

Castrol Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

 

Advantages

  • Excellent water separation characteristics which allow condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
  • Fully inhibited against corrosion which enables protection even when operating under humid conditions.
  • Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to longer operating life (up to 2000 hours).
  • Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
  • Excellent coalescing properties mean little carry over of oil in the air stream.

 

 

ISO Viscosity and pack sizes available
AIRCOL PD 32 - 20L & 208L
AIRCOL PD 46 - 20L, 208L & Bulk delivery
AIRCOL PD 68 - 4x5L, 20L & 208L
AIRCOL PD 100 - 20L & 208L
AIRCOL PD 150 - 20L & 208L

Discover More +
Total Planetelf ACD 100 FY - Compressor Oil - 112608

Total Planetelf ACD 100 FY - Compressor Oil - 112608

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Nevastane SL 100 - Compressors, pneumatic and hydraulic oils - 127557

Total Nevastane SL 100 - Compressors, pneumatic and hydraulic oils - 127557

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane SH 100 - Compressors, pneumatic and hydraulic oils - 190543

Total Nevastane SH 100 - Compressors, pneumatic and hydraulic oils - 190543

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +