Kernow Oils - Lubricant Solutions

Filter Your Results...


Also filter...

By Brand...

Compressor Oils

Total Dacnis 150 - Compressor Oil - 162126

Total Dacnis 150 - Compressor Oil - 162126


Mineral oils for rotary and reciprocating air compressors.



  • Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

                - For screw compressors - DACNIS 32, 46, or 68
                - For reciprocating compressors - DACNIS 68, 100 or 150.

  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.



  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE…



  • The properties of DACNIS:

                     - avoid the carbon build up
                     - allow a good oil/air and oil/condensates separation
                     - protect components against wear and corrosion.

  • The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency.
  • Extending the service life of the separating filter elements. The DACNIS oils have an anticlogging property that ensures the efficiency of the filters during a long period.


Pack sizes available - 20L, 208L drums

Discover More +
Castrol Aircol PD 150 - Air compressor lubricants - 2169

Castrol Aircol PD 150 - Air compressor lubricants - 2169


Castrol Aircol PD oils are a range of compressor oils, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors. For lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.



The Castrol Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with delivery temperatures of up to 120°C. Castrol Aircol PD compressor oils have excellent oxidation resistance and low carbon forming tendencies and meet the requirements of the DIN 51506 VD-L classification of lubricants for compressors having air discharge temperatures up to 220ºC. Castrol Aircol PD compressor oils also have sufficient anti-wear performance, as measured in the FZG Gear Test, to allow their use in certain screw compressors where drive between the screws is transmitted by the rotor faces themselves. The modern tendency in air compressor design is towards higher capacities from smaller units, with higher loads and temperatures leading to greater demands upon the lubricant.

Castrol Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.



  • Excellent water separation characteristics which allow condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
  • Fully inhibited against corrosion which enables protection even when operating under humid conditions.
  • Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to longer operating life (up to 2000 hours).
  • Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
  • Excellent coalescing properties mean little carry over of oil in the air stream.



ISO Viscosity and pack sizes available
AIRCOL PD 32 - 20L & 208L
AIRCOL PD 46 - 20L, 208L & Bulk delivery
AIRCOL PD 68 - 4x5L, 20L & 208L
AIRCOL PD 100 - 20L & 208L
AIRCOL PD 150 - 20L & 208L

Discover More +
Total Planetelf ACD 150 FY - Compressor Oil - 125883

Total Planetelf ACD 150 FY - Compressor Oil - 125883


Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.



  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).



International Specification - ISO 6743-3: DRD



  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.


Pack sizes available - 20ltr

Discover More +