Kernow Oils - Lubricant Solutions

Compressor Oils

BP Energol RC-R 46 - Premium Air Compressor Oil

BP Energol RC-R 46 - Premium Air Compressor Oil

 

Description
These oils are formulated from highly refined mineral base oils, and incorporate additives that minimize oxidation, deposit-formation, foaming and filter-blocking.
Furthermore, they enhance load-carrying and antiwear properties and combat the effects of water contamination and prevent corrosion.

 

Applications

Energol RC-R grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil-flooded screw type with delivery temperatures of up to 120 °C. Under these conditions it is important that the oil maintains its high lubrication performance. The grades in this range are suitable for both static and mobile systems, operating at ambient temperatures ranging from -25 °C to 50°C. Most rotary applications call for ISO 32 or ISO 46 grades and the higher-viscosities ISO 68 and 100 may be used satisfactorily in reciprocating compressors.
The Energol RC-R oils meet the requirements of the following standards:

  • ISO DP 6521 for mineral oils
  • L-DAA and L-DAB for reciprocating air compressors
  • L-DAH and L -DAG for rotary air compressors DIN 51352 p. II (Pneurop Oxidation Test) and DIN 51506 VD-L

These oils are approved by:

  • Atlas Copco -Sullair
  • Compair / Luchard -Crepelle
  • Burton Corblin -Consolidated Pneumatic Tool

 

Main Benefits

  • Low deposit-forming tendency
  • Prevention of oil-filter blockage in the presence of water.
  • Excellent anti-wear performance to extend service life of compressors.
  • Rapid separation of oil/air in the air -coalescer for long air-filter life and lower oil-carryover.
  • Powerful water -separation and anti-corrosion characteristics to counter adverse effects of moisture contamination.
Discover More +
BP Energol LPT 32 - Refrigeration compressor oil

BP Energol LPT 32 - Refrigeration compressor oil

 

Description
The Energol LPT grades are refrigeration compressor lubricants formulated from highly refined naphtenic base oils for use in both large industrial and small domestic refrigeration units.

 

Applications
The Energol LPT range is formulated to function as lubricants, coolants as well as sealants in refrigerating compressors. They maintain good lubrication properties at the high temperatures reached during the compression phase and good fluidity at the low temperatures within the evaporators. Excellent lubrication of the moving parts in the compressor as well as recycling of the oil, entrained into the system by the refrigerant, are therefore ensured.
The chemical stability of the Energol LPT oils prevents them from reacting with the refrigerants used in refrigeration systems to form potentially disruptive breakdown products. All Energol LPT grades are suitable for use in systems using Ammonia (NH3) or halogenated hydrocarbons. They can also be used where good low temperature flow properties are required in the lubricant.

 

Main Benefits
The BP range of Energol LPT oils ensure long and trouble-free operation of refrigeration systems through a combination of:

  • High thermal and chemical stability
  • Good temperature/viscosity behaviour
  • Good low temperature flow properties
Discover More +
BP Energol LPT 46 - Refrigeration compressor oil

BP Energol LPT 46 - Refrigeration compressor oil

 

Description
The Energol LPT grades are refrigeration compressor lubricants formulated from highly refined naphtenic base oils for use in both large industrial and small domestic refrigeration units.

 

Applications
The Energol LPT range is formulated to function as lubricants, coolants as well as sealants in refrigerating compressors. They maintain good lubrication properties at the high temperatures reached during the compression phase and good fluidity at the low temperatures within the evaporators. Excellent lubrication of the moving parts in the compressor as well as recycling of the oil, entrained into the system by the refrigerant, are therefore ensured.
The chemical stability of the Energol LPT oils prevents them from reacting with the refrigerants used in refrigeration systems to form potentially disruptive breakdown products. All Energol LPT grades are suitable for use in systems using Ammonia (NH3) or halogenated hydrocarbons. They can also be used where good low temperature flow properties are required in the lubricant.

 

Main Benefits
The BP range of Energol LPT oils ensure long and trouble-free operation of refrigeration systems through a combination of:

  • High thermal and chemical stability
  • Good temperature/viscosity behaviour
  • Good low temperature flow properties
Discover More +
BP Energol LPT 68 - Refrigeration compressor oil

BP Energol LPT 68 - Refrigeration compressor oil

 

Description
The Energol LPT grades are refrigeration compressor lubricants formulated from highly refined naphtenic base oils for use in both large industrial and small domestic refrigeration units.

 

Applications
The Energol LPT range is formulated to function as lubricants, coolants as well as sealants in refrigerating compressors. They maintain good lubrication properties at the high temperatures reached during the compression phase and good fluidity at the low temperatures within the evaporators. Excellent lubrication of the moving parts in the compressor as well as recycling of the oil, entrained into the system by the refrigerant, are therefore ensured.
The chemical stability of the Energol LPT oils prevents them from reacting with the refrigerants used in refrigeration systems to form potentially disruptive breakdown products. All Energol LPT grades are suitable for use in systems using Ammonia (NH3) or halogenated hydrocarbons. They can also be used where good low temperature flow properties are required in the lubricant.

 

Main Benefits
The BP range of Energol LPT oils ensure long and trouble-free operation of refrigeration systems through a combination of:

  • High thermal and chemical stability
  • Good temperature/viscosity behaviour
  • Good low temperature flow properties
Discover More +
BP Enersyn LPS 68 - Synthetic Refrigeration Compressor Lubricant

BP Enersyn LPS 68 - Synthetic Refrigeration Compressor Lubricant

 

Description
The lubricants in this range are formulated from blended alkylated benzene synthetic base stocks, and incorporate additives that give extended oil life and machine cleanliness when used in refrigerator compressors, particularly where ammonia is the refrigerant.
The oxidation stability is superior to that of mineral oils when used in air compressors.

 

Applications
The Enersyn LPS lubricants possess physical and chemical properties that are highly suited to modern refrigeration equipment. They are recommended for the reciprocating and rotary screw compressors employed in industrial refrigeration systems.

These grades are superior to conventional mineral oil refrigerator lubricants where evaporation temperatures are low (from -60 °C down to -100 °C) and where the refrigerants are of the critical fluorocarbon type (R13, R22 and R502).

They are also the preferred lubricants for ammonia compressors. Because the Enersyn LPS grades have low carbon forming tendencies, they are suitable for air compressors operating with high discharge air temperatures, thereby reducing the risk of fires and explosions.

 

Main Benefits

  • Excellent chemical stability : resist reaction with refrigerants.
  • High thermal stability, for long life.
  • Low floc point : withstand low evaporation temperatures without wax precipitation.
  • Exceptionally low moisture content : high dielectric strength.
  • Completely miscible with mineral oils, in any proportion.
Discover More +
BP Enersyn RC-S 32 - Synthetic Rotary Air Compressor Lubricant

BP Enersyn RC-S 32 - Synthetic Rotary Air Compressor Lubricant

 

Description
A range of premium synthetic (non-mineral) lubricants, based on polyalpha-olefin materials.
The lubricants are fully formulated, and contain anti-wear additives to enhance lubrication, anti-oxidants to minimize oxidation and the formation of deposits, and corrosion inhibitors to control the effects of moisture contamination.

 

Applications
These lubricants have been designed to provide a high level of performance in air compressors working in severe conditions of duty.

The ISO 32 grade is recommended for rotary-screw compressors, and the ISO 68 grade for rotary-vane type.

With their low carbon-formation tendencies and high oxidation resistance, they can also be used in circulatory systems of plain and rolling bearings operating at high temperatures - as in paper-making machinery.

Enersyn RC-S lubricants fully meet the currently defined requirements of the ISO-L-DAH classification for rotary-screw compressor mineral oils, and show excellent oxidation resistance, as assessed by a rotary-compressor oxidation test (ROCOT) drawn from a modified Pneurop oxidation test using Iron Naphthenate catalyst at 120 °C for 1000 hours. Although oxidation test limits of the ISO-LDAC/ G/H/J specifications have not yet been defined, and the ROCOT tests are indicative of high stability, particularly bearing in mind the long hours run. The best evidence for the excellent oxidation stability of the Enersyn RC-S lubricants and their overall high performance is the entirely satisfactory results of service trials carried out using rotary-screw compressors operating in severe conditions (120 °C) for over 4000 hours with no change of lubricant.

 

Main Benefits

  • Excellent anti-wear performance in arduous conditions of heat and moisture gives long service life for compressors.
  • Compressor internals are kept in clean condition, thereby minimizing maintenance costs.
  • Zinc-free formulation minimizes blockage of oilfilters in the presence of water, and ensures excellent filterability and lubricant cleanliness.
  • Rapid water-separation and powerful anticorrosion characteristics enable the adverse effects of moisture contamination to be avoided.
  • A balanced combination of anti-foam and air release properties ensures rapid separation of air and lubricant in the coalescer equipment, with consequent longer air-filter life and lower carry-over of lubricant.
  • Fully compatible with Energol RC -R mineral oils.
  • Compatible with compressor seals of the type normally used with mineral oils.
  • Low volatility compared to mineral oil, reduces lubricant carry-over.
Discover More +
Total Lunaria FR 32 - Compressor Oil - 112427

Total Lunaria FR 32 - Compressor Oil - 112427

 

Wax free naphtenic mineral oils for refrigerating compressors.

 

Applications:

  • Lubrication of cylinders, bearing and seals of all types of refrigerating compressors.
  • Lubrication of rotary screw compressors:

               - parallel screw
               - single screw with Zimmern type gear.

  • The LUNARIA FR are compatible with most of chlorofluorinated refrigerant gases and with ammonia in compatible service conditions (evaporator temperature higher than - 15 °C). For refrigerating applications with low temperature ammonia, it is recommended to use the specific lubricants LUNARIA NH or LUNARIA SH.

 

Specifications:

  • ISO 6743-3 : DRA.

OEM Approvals - APV, BOCK, BITZER, GRAM, CARRIER, GRASSO, HOWDEN, J&E HALL, SABROE, YORK.

 

Advantages:

  • High chemical stability with refrigerants.
  • Absence of copper plating.
  • Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than - 15 °C).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Lunaria NH 68 - Compressor Oil - 112440

Total Lunaria NH 68 - Compressor Oil - 112440

 

Additive enhanced hydrocracked mineral oil for ammonia (R 717) refrigerating compressors.

 

Applications:

  • Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
  • Hydrocracked technology of base oils to improve oil drain interval.
  • Field of application: evaporator temperature down to -30°C.

 

Specifications:

OEM Approvals - APV, BOCK, J&E HALL, GRAM, GRASSO, HOWDEN, SABROE.

 

Advantages:

  • High resistance to oxidation in the presence of ammonia. Base oils and additivation system specillay selected to avoid the formation of black sludges (reaction between oil and ammonia).
  • Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, thereby providing excellent heat exchange.
  • Very high flash point given the low volatility of LUNARIA NH oils: oil consumption is reduced by 30 to 50 % compared with conventional oils.
  • Good compatibility with common elastomers (chloroprene, NBR….).

 

Warning: Must be kept in storage to avoid the presence of water within the oil. Water could block the evaporator.

 

Pack sizes available - 208L drums

Discover More +
Total Lunaria SH 46 - Compressor Oil - 112445

Total Lunaria SH 46 - Compressor Oil - 112445

 

Full-synthetic PAO based oil for ammonia (R 717) refrigerating compressors.

 

Applications:

  • Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
  • PAO (polyalphaolefin) base oils to improve oil drain interval and ensure good performances even at very low temperature.
  • Field of application: evaporator temperature down to -50°C.

 

Specifications:

  • OEM Approvals - APV, BOCK, J&E HALL, GRAM, GRASSO, HOWDEN, SABROE.
  • NSF-H1 registered certificate number: 139826: LUNARIA SH 46

 

Advantages:

  • High resistance to oxidation in the presence of ammonia. Synthetic base oils and additivation system specially selected to avoid the formation of black sludges (reaction between oil and ammonia).
  • Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, thereby providing excellent heat exchange.
  • Very high flash point given the low volatility of LUNARIA SH oils: oil consumption is reduced by 30 to 50 % compared with conventional oils.
  • Good compatibility with common elastomers (chloroprene, NBR….).

 

Warning: Must be kept in storage to avoid the presence of water within the oil. Water could block the evaporator.

 

Pack sizes available - 208L drums

Discover More +
Total Lunaria SK 55 - Compressor Oil - 112473

Total Lunaria SK 55 - Compressor Oil - 112473

 

Alkylbenzene synthetic oils for refrigerating compressors.

 

Applications:

  • LUNARIA SK is a quality refrigeration compressors lubricant using CFC or HCFC refrigerants. Due to their chemical nature, these oils have superior miscibility with fluorocarbon refrigerant such as R12, R502 and R22 and are thus perfectly adapted to the low temperatures.
  • LUNARIA SK is also suitable for the cylinder lubrication of heavy duty reciprocating air compressors (discharge temperature > 200 °C).

 

Specifications:

OEM Approvals - APV, BITZER, BOCK, SABROE, YORK, REFCOMP.

 

Advantages:

  • LUNARIA SK provides high chemical stability with refrigerants, low foaming tendency and excellent lubrication properties.
  • LUNARIA SK has very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (down to – 60 °C at the evaporator).

 

CAUTION: Deposits may clog filters when shifting from a mineral oil to a synthetic alkylbenzene oil during initial runs.

 

Pack sizes available - 20L

Discover More +
Total Lunaria SK 100 - Compressor Oil - 112474

Total Lunaria SK 100 - Compressor Oil - 112474

 

Alkylbenzene synthetic oils for refrigerating compressors.

 

Applications:

  • LUNARIA SK is a quality refrigeration compressors lubricant using CFC or HCFC refrigerants. Due to their chemical nature, these oils have superior miscibility with fluorocarbon refrigerant such as R12, R502 and R22 and are thus perfectly adapted to the low temperatures.
  • LUNARIA SK is also suitable for the cylinder lubrication of heavy duty reciprocating air compressors (discharge temperature > 200 °C).

 

Specifications:

OEM Approvals - APV, BITZER, BOCK, SABROE, YORK, REFCOMP.

 

Advantages:

  • LUNARIA SK provides high chemical stability with refrigerants, low foaming tendency and excellent lubrication properties.
  • LUNARIA SK has very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (down to – 60 °C at the evaporator).

 

CAUTION: Deposits may clog filters when shifting from a mineral oil to a synthetic alkylbenzene oil during initial runs.

 

Pack sizes available - 20L

Discover More +
Total Lunaria FR 46 - Compressor Oil - 112588

Total Lunaria FR 46 - Compressor Oil - 112588

 

Wax free naphtenic mineral oils for refrigerating compressors.

 

Applications:

  • Lubrication of cylinders, bearing and seals of all types of refrigerating compressors.
  • Lubrication of rotary screw compressors:

               - parallel screw
               - single screw with Zimmern type gear.

  • The LUNARIA FR are compatible with most of chlorofluorinated refrigerant gases and with ammonia in compatible service conditions (evaporator temperature higher than - 15 °C). For refrigerating applications with low temperature ammonia, it is recommended to use the specific lubricants LUNARIA NH or LUNARIA SH.

 

Specifications:

  • ISO 6743-3 : DRA.

OEM Approvals - APV, BOCK, BITZER, GRAM, CARRIER, GRASSO, HOWDEN, J&E HALL, SABROE, YORK.

 

Advantages:

  • High chemical stability with refrigerants.
  • Absence of copper plating.
  • Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than - 15 °C).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Lunaria FR 68 - Compressor Oil - 112589

Total Lunaria FR 68 - Compressor Oil - 112589

 

Wax free naphtenic mineral oils for refrigerating compressors.

 

Applications:

  • Lubrication of cylinders, bearing and seals of all types of refrigerating compressors.
  • Lubrication of rotary screw compressors:

               - parallel screw
               - single screw with Zimmern type gear.

  • The LUNARIA FR are compatible with most of chlorofluorinated refrigerant gases and with ammonia in compatible service conditions (evaporator temperature higher than - 15 °C). For refrigerating applications with low temperature ammonia, it is recommended to use the specific lubricants LUNARIA NH or LUNARIA SH.

 

Specifications:

  • ISO 6743-3 : DRA.

OEM Approvals - APV, BOCK, BITZER, GRAM, CARRIER, GRASSO, HOWDEN, J&E HALL, SABROE, YORK.

 

Advantages:

  • High chemical stability with refrigerants.
  • Absence of copper plating.
  • Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than - 15 °C).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dacnis SH 100 - PAO Synthetic oils for rotary air compressors - 112593

Total Dacnis SH 100 - PAO Synthetic oils for rotary air compressors - 112593

 

Applications:

Lubrication and cooling of the following types of air compressors:

  • Rotary screw compressors (ISO VG 32, 46, 68)
  • Reciprocating compressors (ISO VG 100).

Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.

 

Specifications:

  • ISO 6743 classified DAJ for heavy duty applications.

 

Advantages:

The properties of DACNIS SH:

  • Avoids the carbon build up
  • Allows a good oil/air and oil/condensates separation
  • Protects the screws against wear and corrosion.

The use of DACNIS SH allows real cuts in the operating costs of the compressed air production facility by:

  • Optimising the compressor efficiency
  • Extending the drain intervals. The possible achieved drain intervals can be:

                 - from 4000 to 6000 hours for fixed compressors in standard use
                 - up to 8000 hours with lubricant analysis monitoring.

  • Extending the service life of the separating filter elements. The DACNIS SH have an anti-clogging property that ensures the efficiency of the filters during a long period (up to 8000 hours).

 

Pack sizes available - 20L

Discover More +
Total Dacnis SH 68 - PAO Synthetic oils for rotary air compressors - 112594

Total Dacnis SH 68 - PAO Synthetic oils for rotary air compressors - 112594

 

Applications:

Lubrication and cooling of the following types of air compressors:

  • Rotary screw compressors (ISO VG 32, 46, 68)
  • Reciprocating compressors (ISO VG 100).

Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.

 

Specifications:

  • ISO 6743 classified DAJ for heavy duty applications.

 

Advantages:

The properties of DACNIS SH:

  • Avoids the carbon build up
  • Allows a good oil/air and oil/condensates separation
  • Protects the screws against wear and corrosion.

The use of DACNIS SH allows real cuts in the operating costs of the compressed air production facility by:

  • Optimising the compressor efficiency
  • Extending the drain intervals. The possible achieved drain intervals can be:

                 - from 4000 to 6000 hours for fixed compressors in standard use
                 - up to 8000 hours with lubricant analysis monitoring.

  • Extending the service life of the separating filter elements. The DACNIS SH have an anti-clogging property that ensures the efficiency of the filters during a long period (up to 8000 hours).

 

Pack sizes available - 20L

Discover More +
Total Dacnis SH 46 - PAO Synthetic oils for rotary air compressors - 112595

Total Dacnis SH 46 - PAO Synthetic oils for rotary air compressors - 112595

 

Applications:

Lubrication and cooling of the following types of air compressors:

  • Rotary screw compressors (ISO VG 32, 46, 68)
  • Reciprocating compressors (ISO VG 100).

Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.

 

Specifications:

  • ISO 6743 classified DAJ for heavy duty applications.

 

Advantages:

The properties of DACNIS SH:

  • Avoids the carbon build up
  • Allows a good oil/air and oil/condensates separation
  • Protects the screws against wear and corrosion.

The use of DACNIS SH allows real cuts in the operating costs of the compressed air production facility by:

  • Optimising the compressor efficiency
  • Extending the drain intervals. The possible achieved drain intervals can be:

                 - from 4000 to 6000 hours for fixed compressors in standard use
                 - up to 8000 hours with lubricant analysis monitoring.

  • Extending the service life of the separating filter elements. The DACNIS SH have an anti-clogging property that ensures the efficiency of the filters during a long period (up to 8000 hours).

 

Pack sizes available - 20L, 208L drums

Discover More +
Castrol Aircol SR 32 - Synthetic rotary compressor lubricant - 2135

Castrol Aircol SR 32 - Synthetic rotary compressor lubricant - 2135

 

The Castrol Aircol™ SR compressor oil range of premium lubricants are designed for use in rotary screw compressors and are based on polyalphaolefin (PAO) fluids.


Application

Aircol SR is suitable for use in oil flooded rotary screw compressors operating under extreme climatic conditions, harsh environments and severe operating conditions where very high air discharge temperatures (> 100°C) are experienced. These oils are also suitable for use in compressor units operating at normal operating conditions, with the maximum air discharge temperature =/< 100°C, as defined by ISO 6743-3:2003.

For normal operating conditions, these products can be used for extended drain intervals up to 8000 hours.

Aircol SR range is fully compatible with nitrile, silicone, polyurethane and fluropolymer seal materials typically used in compressor units. It is not compatible with butadiene styrene (SBR) or ethylene propylene (EPDM) seals.

 

Aircol SR is classified as follows:
DIN 51506 classification - VDL
ISO 6743/3 - DAG, DAH and DAJ for rotary air compressors

Aircol SR grades meet the requirements of:
Atlas Copco 8000 hour oil drain interval
Kaeser
 

Pack sizes available - 20L & 208L

Discover More +
Total Dacnis SE 46 - Synthetic ester oils for air compressors - 112609

Total Dacnis SE 46 - Synthetic ester oils for air compressors - 112609

 

Applications:

DACNIS SE is a high performance lubricant developed for lubrication and cooling of the following types of air compressors:
- high pressure reciprocating air compressor (ISO VG 100)
- screw and rotary vane air compressor (ISO VG 46, 68 or 100)
- turbocompressors (ISO VG 68)
- vacuum pumps (ISO VG 100).

 

Specifications:

  • ISO 6743 classified DAC and DAJ for heavy duty applications.
  • DACNIS SE meets the DIN 51 506 VDL requirements.

 

Advantages:

  • Excellent thermal stability of the lubricant under high temperature conditions.
  • Low foaming tendency for turbocompressor applications.
  • Low volatility.
  • Low vanish and carbon deposits.
  • Protection against rust and corrosion.
  • Compressor start up by - 20°C.
  • Operating conditions at discharge temperature up to 250°C and discharge pressure up to 200 bars.

 

Pack sizes available - 20L drums

Discover More +
Total Dacnis SE 100 - Synthetic ester oils for air compressors - 120658

Total Dacnis SE 100 - Synthetic ester oils for air compressors - 120658

 

Applications:

DACNIS SE is a high performance lubricant developed for lubrication and cooling of the following types of air compressors:
- high pressure reciprocating air compressor (ISO VG 100)
- screw and rotary vane air compressor (ISO VG 46, 68 or 100)
- turbocompressors (ISO VG 68)
- vacuum pumps (ISO VG 100).

 

Specifications:

  • ISO 6743 classified DAC and DAJ for heavy duty applications.
  • DACNIS SE meets the DIN 51 506 VDL requirements.

 

Advantages:

  • Excellent thermal stability of the lubricant under high temperature conditions.
  • Low foaming tendency for turbocompressor applications.
  • Low volatility.
  • Low vanish and carbon deposits.
  • Protection against rust and corrosion.
  • Compressor start up by - 20°C.
  • Operating conditions at discharge temperature up to 250°C and discharge pressure up to 200 bars.

 

Pack sizes available - 20L drums, 208L drums

Discover More +
Total Dacnis SE 68 - Synthetic ester oils for air compressors - 121890

Total Dacnis SE 68 - Synthetic ester oils for air compressors - 121890

 

Applications:

DACNIS SE is a high performance lubricant developed for lubrication and cooling of the following types of air compressors:
- high pressure reciprocating air compressor (ISO VG 100)
- screw and rotary vane air compressor (ISO VG 46, 68 or 100)
- turbocompressors (ISO VG 68)
- vacuum pumps (ISO VG 100).

 

Specifications:

  • ISO 6743 classified DAC and DAJ for heavy duty applications.
  • DACNIS SE meets the DIN 51 506 VDL requirements.

 

Advantages:

  • Excellent thermal stability of the lubricant under high temperature conditions.
  • Low foaming tendency for turbocompressor applications.
  • Low volatility.
  • Low vanish and carbon deposits.
  • Protection against rust and corrosion.
  • Compressor start up by - 20°C.
  • Operating conditions at discharge temperature up to 250°C and discharge pressure up to 200 bars.

 

Pack sizes available - 20L drums, 208L drums

Discover More +
Total Dacnis SH 32 - PAO Synthetic oils for rotary air compressors - 126851

Total Dacnis SH 32 - PAO Synthetic oils for rotary air compressors - 126851

 

Applications:

Lubrication and cooling of the following types of air compressors:

  • Rotary screw compressors (ISO VG 32, 46, 68)
  • Reciprocating compressors (ISO VG 100).

Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.

 

Specifications:

  • ISO 6743 classified DAJ for heavy duty applications.

 

Advantages:

The properties of DACNIS SH:

  • Avoids the carbon build up
  • Allows a good oil/air and oil/condensates separation
  • Protects the screws against wear and corrosion.

The use of DACNIS SH allows real cuts in the operating costs of the compressed air production facility by:

  • Optimising the compressor efficiency
  • Extending the drain intervals. The possible achieved drain intervals can be:

                 - from 4000 to 6000 hours for fixed compressors in standard use
                 - up to 8000 hours with lubricant analysis monitoring.

  • Extending the service life of the separating filter elements. The DACNIS SH have an anti-clogging property that ensures the efficiency of the filters during a long period (up to 8000 hours).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dacnis 32 - Compressor Oil - 162118

Total Dacnis 32 - Compressor Oil - 162118

 

Mineral oils for rotary and reciprocating air compressors.

 

Applications:

  • Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

                - For screw compressors - DACNIS 32, 46, or 68
                - For reciprocating compressors - DACNIS 68, 100 or 150.

  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

 

Specifications:

  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE…

 

Advantages:

  • The properties of DACNIS:

                     - avoid the carbon build up
                     - allow a good oil/air and oil/condensates separation
                     - protect components against wear and corrosion.

  • The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency.
  • Extending the service life of the separating filter elements. The DACNIS oils have an anticlogging property that ensures the efficiency of the filters during a long period.

 

Pack sizes available - 20L

Discover More +
Total Dacnis 46 - Compressor Oil - 162119

Total Dacnis 46 - Compressor Oil - 162119

 

Mineral oils for rotary and reciprocating air compressors.

 

Applications:

  • Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

                - For screw compressors - DACNIS 32, 46, or 68
                - For reciprocating compressors - DACNIS 68, 100 or 150.

  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

 

Specifications:

  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE…

 

Advantages:

  • The properties of DACNIS:

                     - avoid the carbon build up
                     - allow a good oil/air and oil/condensates separation
                     - protect components against wear and corrosion.

  • The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency.
  • Extending the service life of the separating filter elements. The DACNIS oils have an anticlogging property that ensures the efficiency of the filters during a long period.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dacnis 68 - Compressor Oil - 162121

Total Dacnis 68 - Compressor Oil - 162121

 

Mineral oils for rotary and reciprocating air compressors.

 

Applications:

  • Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

                - For screw compressors - DACNIS 32, 46, or 68
                - For reciprocating compressors - DACNIS 68, 100 or 150.

  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

 

Specifications:

  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE…

 

Advantages:

  • The properties of DACNIS:

                     - avoid the carbon build up
                     - allow a good oil/air and oil/condensates separation
                     - protect components against wear and corrosion.

  • The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency.
  • Extending the service life of the separating filter elements. The DACNIS oils have an anticlogging property that ensures the efficiency of the filters during a long period.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dacnis 100 - Compressor Oil - 162124

Total Dacnis 100 - Compressor Oil - 162124

 

Mineral oils for rotary and reciprocating air compressors.

 

Applications:

  • Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

                - For screw compressors - DACNIS 32, 46, or 68
                - For reciprocating compressors - DACNIS 68, 100 or 150.

  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

 

Specifications:

  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE…

 

Advantages:

  • The properties of DACNIS:

                     - avoid the carbon build up
                     - allow a good oil/air and oil/condensates separation
                     - protect components against wear and corrosion.

  • The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency.
  • Extending the service life of the separating filter elements. The DACNIS oils have an anticlogging property that ensures the efficiency of the filters during a long period.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +
Total Dacnis 150 - Compressor Oil - 162126

Total Dacnis 150 - Compressor Oil - 162126

 

Mineral oils for rotary and reciprocating air compressors.

 

Applications:

  • Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

                - For screw compressors - DACNIS 32, 46, or 68
                - For reciprocating compressors - DACNIS 68, 100 or 150.

  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

 

Specifications:

  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE…

 

Advantages:

  • The properties of DACNIS:

                     - avoid the carbon build up
                     - allow a good oil/air and oil/condensates separation
                     - protect components against wear and corrosion.

  • The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency.
  • Extending the service life of the separating filter elements. The DACNIS oils have an anticlogging property that ensures the efficiency of the filters during a long period.

 

Pack sizes available - 20L, 208L drums

Discover More +
Castrol Aircol SR 46 - Synthetic rotary compressor lubricant - 2136

Castrol Aircol SR 46 - Synthetic rotary compressor lubricant - 2136


The Castrol Aircol™ SR compressor oil range of premium lubricants are designed for use in rotary screw compressors and are based on polyalphaolefin (PAO) fluids.


Application

Aircol SR is suitable for use in oil flooded rotary screw compressors operating under extreme climatic conditions, harsh environments and severe operating conditions where very high air discharge temperatures (> 100°C) are experienced. These oils are also suitable for use in compressor units operating at normal operating conditions, with the maximum air discharge temperature =/< 100°C, as defined by ISO 6743-3:2003.

For normal operating conditions, these products can be used for extended drain intervals up to 8000 hours.

Aircol SR range is fully compatible with nitrile, silicone, polyurethane and fluropolymer seal materials typically used in compressor units. It is not compatible with butadiene styrene (SBR) or ethylene propylene (EPDM) seals.

 

Aircol SR is classified as follows:
DIN 51506 classification - VDL
ISO 6743/3 - DAG, DAH and DAJ for rotary air compressors

Aircol SR grades meet the requirements of:
Atlas Copco 8000 hour oil drain interval
Kaeser

 

Pack sizes available - 20L, 208L, 1000L IBC

Discover More +
Castrol Aircol SR 68 - Synthetic rotary compressor lubricant - 2137

Castrol Aircol SR 68 - Synthetic rotary compressor lubricant - 2137


The Castrol Aircol™ SR compressor oil range of premium lubricants are designed for use in rotary screw compressors and are based on polyalphaolefin (PAO) fluids.


Application

Aircol SR is suitable for use in oil flooded rotary screw compressors operating under extreme climatic conditions, harsh environments and severe operating conditions where very high air discharge temperatures (> 100°C) are experienced. These oils are also suitable for use in compressor units operating at normal operating conditions, with the maximum air discharge temperature =/< 100°C, as defined by ISO 6743-3:2003.

For normal operating conditions, these products can be used for extended drain intervals up to 8000 hours.

Aircol SR range is fully compatible with nitrile, silicone, polyurethane and fluropolymer seal materials typically used in compressor units. It is not compatible with butadiene styrene (SBR) or ethylene propylene (EPDM) seals.

 

Aircol SR is classified as follows:
DIN 51506 classification - VDL
ISO 6743/3 - DAG, DAH and DAJ for rotary air compressors

Aircol SR grades meet the requirements of:
Atlas Copco 8000 hour oil drain interval
Kaeser
 

Pack sizes available - 20L

Discover More +
Castrol Aircol MR 46 - Rotary Screw Compressor Lubricant - 2145

Castrol Aircol MR 46 - Rotary Screw Compressor Lubricant - 2145

 

Synthetic compressor oil for both oil flooded and oil injected rotary screw compressors operating continuously at air discharge temperatures up to 90ºC. The product has been designed to meet service drain intervals of 4000 hours. The Castrol AircolTM MR compressor oil range of premium lubricants are formulated from highly refined mineral oils and novel additive technology to give outstanding antiwear and antirust performance to meet the requirements of Atlas Copco and similar types of compressor design.

ISO Viscosity and pack sizes available
AIRCOL MR 46 - 20L & 208L

 

 

Application

Aircol MR incorporates a carefully balanced antioxidant system providing improved oxidative and thermal stability giving “extended” service life for both oil flooded and oil injected rotary screw compressors operating continuously at air discharge temperatures up to 90ºC. The product has been designed to meet service drain intervals of 4000 hours. For intermittent or continuous operation with air discharge temperatures above 90ºC the manufacturers’ standard oil change periods should be used. The Aircol MR range is fully compatible with nitrile, silicone and fluropolymer seal materials.

 

Aircol MR is classified as follows:
ISO 6743-3 Compressor Oils
DAG and DAH for rotary air compressors
Aircol MR grades meet the requirements of:
Atlas Copco for 4000 hour oil life.

Discover More +
Castrol Aircol SN 68 - Synthetic Air Compressor Lubricant - 2161

Castrol Aircol SN 68 - Synthetic Air Compressor Lubricant - 2161

 

Castrol Aircol SN compressor lubricants are high quality synthetic diesters. For use in all types of air compressor, especially reciprocating and rotary screw compressors operating under severe or normal conditions.

 

Application

Castrol Aircol SN compressor lubricants were developed to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer much reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

 

ISO Viscosity and pack sizes available
AIRCOL SN 68 - 20L
AIRCOL SN 100 - 20L

Discover More +
Castrol Aircol SN 100 - Synthetic Air Compressor Lubricant - 2162

Castrol Aircol SN 100 - Synthetic Air Compressor Lubricant - 2162

 

Castrol Aircol SN compressor lubricants are high quality synthetic diesters. For use in all types of air compressor, especially reciprocating and rotary screw compressors operating under severe or normal conditions.

 

Application

Castrol Aircol SN compressor lubricants were developed to cope with the severe operating conditions experienced in rotary screw, rotary vane and reciprocating air compressors operating at high compression ratios and high discharge temperatures. Under these conditions Aircol SN compressor oils offer much reduced carbon forming tendencies and extended oil life when compared to mineral oils due to their much higher oxidation resistance. In reciprocating units, Aircol SN grades have up to eight times the service life of mineral oils.

 

ISO Viscosity and pack sizes available
AIRCOL SN 68 - 20L
AIRCOL SN 100 - 20L

Discover More +
Castrol Aircol PD 32 - Air compressor lubricants - 2165

Castrol Aircol PD 32 - Air compressor lubricants - 2165

 

Castrol Aircol PD oils are a range of compressor oils, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors. For lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.

 

Application

The Castrol Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with delivery temperatures of up to 120°C. Castrol Aircol PD compressor oils have excellent oxidation resistance and low carbon forming tendencies and meet the requirements of the DIN 51506 VD-L classification of lubricants for compressors having air discharge temperatures up to 220ºC. Castrol Aircol PD compressor oils also have sufficient anti-wear performance, as measured in the FZG Gear Test, to allow their use in certain screw compressors where drive between the screws is transmitted by the rotor faces themselves. The modern tendency in air compressor design is towards higher capacities from smaller units, with higher loads and temperatures leading to greater demands upon the lubricant.

Castrol Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

 

Advantages

  • Excellent water separation characteristics which allow condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
  • Fully inhibited against corrosion which enables protection even when operating under humid conditions.
  • Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to longer operating life (up to 2000 hours).
  • Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
  • Excellent coalescing properties mean little carry over of oil in the air stream.

 

 

ISO Viscosity and pack sizes available
AIRCOL PD 32 - 20L & 208L
AIRCOL PD 46 - 20L, 208L & Bulk delivery
AIRCOL PD 68 - 4x5L, 20L & 208L
AIRCOL PD 100 - 20L & 208L
AIRCOL PD 150 - 20L & 208L

Discover More +
Castrol Aircol PD 46 - Air compressor lubricants - 2166

Castrol Aircol PD 46 - Air compressor lubricants - 2166

 

Castrol Aircol PD oils are a range of compressor oils, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors. For lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.

 

Application

The Castrol Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with delivery temperatures of up to 120°C. Castrol Aircol PD compressor oils have excellent oxidation resistance and low carbon forming tendencies and meet the requirements of the DIN 51506 VD-L classification of lubricants for compressors having air discharge temperatures up to 220ºC. Castrol Aircol PD compressor oils also have sufficient anti-wear performance, as measured in the FZG Gear Test, to allow their use in certain screw compressors where drive between the screws is transmitted by the rotor faces themselves. The modern tendency in air compressor design is towards higher capacities from smaller units, with higher loads and temperatures leading to greater demands upon the lubricant.

Castrol Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

 

Advantages

  • Excellent water separation characteristics which allow condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
  • Fully inhibited against corrosion which enables protection even when operating under humid conditions.
  • Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to longer operating life (up to 2000 hours).
  • Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
  • Excellent coalescing properties mean little carry over of oil in the air stream.

 

 

ISO Viscosity and pack sizes available
AIRCOL PD 32 - 20L & 208L
AIRCOL PD 46 - 20L, 208L & Bulk delivery
AIRCOL PD 68 - 4x5L, 20L & 208L
AIRCOL PD 100 - 20L & 208L
AIRCOL PD 150 - 20L & 208L

Discover More +
Castrol Aircol PD 68 - Air compressor lubricants - 2167

Castrol Aircol PD 68 - Air compressor lubricants - 2167

 

Castrol Aircol PD oils are a range of compressor oils, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors. For lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.

 

Application

The Castrol Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with delivery temperatures of up to 120°C. Castrol Aircol PD compressor oils have excellent oxidation resistance and low carbon forming tendencies and meet the requirements of the DIN 51506 VD-L classification of lubricants for compressors having air discharge temperatures up to 220ºC. Castrol Aircol PD compressor oils also have sufficient anti-wear performance, as measured in the FZG Gear Test, to allow their use in certain screw compressors where drive between the screws is transmitted by the rotor faces themselves. The modern tendency in air compressor design is towards higher capacities from smaller units, with higher loads and temperatures leading to greater demands upon the lubricant.

Castrol Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

 

Advantages

  • Excellent water separation characteristics which allow condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
  • Fully inhibited against corrosion which enables protection even when operating under humid conditions.
  • Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to longer operating life (up to 2000 hours).
  • Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
  • Excellent coalescing properties mean little carry over of oil in the air stream.

 

 

ISO Viscosity and pack sizes available
AIRCOL PD 32 - 20L & 208L
AIRCOL PD 46 - 20L, 208L & Bulk delivery
AIRCOL PD 68 - 4x5L, 20L & 208L
AIRCOL PD 100 - 20L & 208L
AIRCOL PD 150 - 20L & 208L

Discover More +
Castrol Aircol PD 100 - Air compressor lubricants - 2168

Castrol Aircol PD 100 - Air compressor lubricants - 2168

 

Castrol Aircol PD oils are a range of compressor oils, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors. For lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.

 

Application

The Castrol Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with delivery temperatures of up to 120°C. Castrol Aircol PD compressor oils have excellent oxidation resistance and low carbon forming tendencies and meet the requirements of the DIN 51506 VD-L classification of lubricants for compressors having air discharge temperatures up to 220ºC. Castrol Aircol PD compressor oils also have sufficient anti-wear performance, as measured in the FZG Gear Test, to allow their use in certain screw compressors where drive between the screws is transmitted by the rotor faces themselves. The modern tendency in air compressor design is towards higher capacities from smaller units, with higher loads and temperatures leading to greater demands upon the lubricant.

Castrol Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

 

Advantages

  • Excellent water separation characteristics which allow condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
  • Fully inhibited against corrosion which enables protection even when operating under humid conditions.
  • Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to longer operating life (up to 2000 hours).
  • Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
  • Excellent coalescing properties mean little carry over of oil in the air stream.

 

 

ISO Viscosity and pack sizes available
AIRCOL PD 32 - 20L & 208L
AIRCOL PD 46 - 20L, 208L & Bulk delivery
AIRCOL PD 68 - 4x5L, 20L & 208L
AIRCOL PD 100 - 20L & 208L
AIRCOL PD 150 - 20L & 208L

Discover More +
Castrol Aircol PD 150 - Air compressor lubricants - 2169

Castrol Aircol PD 150 - Air compressor lubricants - 2169

 

Castrol Aircol PD oils are a range of compressor oils, based upon highly refined mineral oils, which are intended for the lubrication of both reciprocating and rotary air compressors. For lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use.

 

Application

The Castrol Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with delivery temperatures of up to 120°C. Castrol Aircol PD compressor oils have excellent oxidation resistance and low carbon forming tendencies and meet the requirements of the DIN 51506 VD-L classification of lubricants for compressors having air discharge temperatures up to 220ºC. Castrol Aircol PD compressor oils also have sufficient anti-wear performance, as measured in the FZG Gear Test, to allow their use in certain screw compressors where drive between the screws is transmitted by the rotor faces themselves. The modern tendency in air compressor design is towards higher capacities from smaller units, with higher loads and temperatures leading to greater demands upon the lubricant.

Castrol Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

 

Advantages

  • Excellent water separation characteristics which allow condensation to readily separate from the oil, minimising the risk of emulsions which could block the oil separator element.
  • Fully inhibited against corrosion which enables protection even when operating under humid conditions.
  • Good thermal stability, low volatility and low carbon formation reduces the risk of fire and explosion and leads to longer operating life (up to 2000 hours).
  • Low deposit forming tendencies extends oil change intervals and provides longer air filter life which contributes to a reduction in maintenance costs.
  • Excellent coalescing properties mean little carry over of oil in the air stream.

 

 

ISO Viscosity and pack sizes available
AIRCOL PD 32 - 20L & 208L
AIRCOL PD 46 - 20L, 208L & Bulk delivery
AIRCOL PD 68 - 4x5L, 20L & 208L
AIRCOL PD 100 - 20L & 208L
AIRCOL PD 150 - 20L & 208L

Discover More +
Castrol Aircol 2294 - Refrigerant Compressor Lubricants - 2173

Castrol Aircol 2294 - Refrigerant Compressor Lubricants - 2173


DESCRIPTION
The Castrol Aircol 2294 series of synthetic refrigeration oils are formulated from selected polyalphaolefin base fluids.


APPLICATION
They are specifically designed for refrigeration systems using screw type compressors in conjunction with very low evaporation temperatures. They may also be specified for certain systems using reciprocating compressors with high compression ratios and high discharge temperatures.
Low miscibility and solubility with R22


ISO Viscosity and pack sizes available
CASTROL AIRCOL 2294 - 20L & 208L
 

Discover More +
Castrol Aircol 299 -  Mineral Refrigeration Compressor Oil - 2178

Castrol Aircol 299 -  Mineral Refrigeration Compressor Oil - 2178

 

For use in refrigeration and air conditioning plants using fluorocarbon refrigerants. Systems using R22 and Ammonia. The Aircol 266 & 299 range of mineral based refrigeration oils is available as two grades of specially selected oils, highly refined, to provide chemical and thermal stability. Their low wax forming tendencies insure low pour points.

 

Application

Aircol 266 & 299 are specifically for use in refrigeration and air conditioning plants using fluorocarbon refrigerants. The exceptional low temperature characteristics of these oils prevent the flocculent precipitation of wax which can otherwise occur in high performance plant using Freon refrigerants. In most systems using R22, the critical solution temperature characteristics of these oils are adequate to prevent oil/refrigerant separation problems within the low temperature circuits. Where evaporation temperatures are exceptionally low or in systems not incorporating oil/refrigerant separators, synthetic base refrigerant oils may be preferred.

 

Pack sizes available - 20L & 208L

Discover More +
Castrol Aircol 266 - Mineral Refrigeration Compressor Oil - 2179

Castrol Aircol 266 - Mineral Refrigeration Compressor Oil - 2179

 

For use in refrigeration and air conditioning plants using fluorocarbon refrigerants. Systems using R22 and Ammonia. The Aircol 266 & 299 range of mineral based refrigeration oils is available as two grades of specially selected oils, highly refined, to provide chemical and thermal stability. Their low wax forming tendencies insure low pour points.

 

Application

Aircol 266 & 299 are specifically for use in refrigeration and air conditioning plants using fluorocarbon refrigerants. The exceptional low temperature characteristics of these oils prevent the flocculent precipitation of wax which can otherwise occur in high performance plant using Freon refrigerants. In most systems using R22, the critical solution temperature characteristics of these oils are adequate to prevent oil/refrigerant separation problems within the low temperature circuits. Where evaporation temperatures are exceptionally low or in systems not incorporating oil/refrigerant separators, synthetic base refrigerant oils may be preferred.

 

Pack sizes available - 20L

Discover More +
Total Planetelf ACD 100 FY - Compressor Oil - 112608

Total Planetelf ACD 100 FY - Compressor Oil - 112608

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Planetelf ACD 32 - Compressor Oil - 112622

Total Planetelf ACD 32 - Compressor Oil - 112622

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +
Total Planetelf ACD 46 - Compressor Oil - 112623

Total Planetelf ACD 46 - Compressor Oil - 112623

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +
Total Planetelf ACD 68 - Compressor Oil - 112624

Total Planetelf ACD 68 - Compressor Oil - 112624

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +
Total Planetelf ACD 150 FY - Compressor Oil - 125883

Total Planetelf ACD 150 FY - Compressor Oil - 125883

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +

Total Planetelf ACD 220 FY - Compressor Oil - 125884

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +
Total Nevastane SL 32 - Compressors, pneumatic and hydraulic oils - 127413

Total Nevastane SL 32 - Compressors, pneumatic and hydraulic oils - 127413

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SL 46 - Compressors, pneumatic and hydraulic oils - 127544

Total Nevastane SL 46 - Compressors, pneumatic and hydraulic oils - 127544

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SL 68 - Compressors, pneumatic and hydraulic oils - 127556

Total Nevastane SL 68 - Compressors, pneumatic and hydraulic oils - 127556

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane SL 100 - Compressors, pneumatic and hydraulic oils - 127557

Total Nevastane SL 100 - Compressors, pneumatic and hydraulic oils - 127557

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Castrol Aircol 2285 - Synthetic Refrigeration Compressor Lubricant - 6107

Castrol Aircol 2285 - Synthetic Refrigeration Compressor Lubricant - 6107

 

The Castrol Aircol 228 range of refrigeration oils are formulated from selected alkyl-benzene base stocks.

Available in: 20L

 

Application

Suitable for use in R22 refrigeration systems with very low evaporator temperatures where Alkyl-benzene based lubricants are recommended by the manufacturer. These products may not be suitable for use in refrigeration systems employing screw compressors due to the high level of solubility of refrigerant in the lubricant, which may reduce its viscosity to unacceptable levels. However this is largely dependent on operating conditions.

 

Benefits

The Castrol Aircol 228 range of refrigeration oils has excellent miscibility and solubility characteristics with R22. The very low floc points enable the Aircol 228 range to be used in systems where evaporator temperatures are extremely low.

Discover More +
Total Nevastane SH 32 - Compressors, pneumatic and hydraulic oils - 190483

Total Nevastane SH 32 - Compressors, pneumatic and hydraulic oils - 190483

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +
Total Nevastane SH 46 - Compressors, pneumatic and hydraulic oils - 190486

Total Nevastane SH 46 - Compressors, pneumatic and hydraulic oils - 190486

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +
Total Nevastane SH 68 - Compressors, pneumatic and hydraulic oils - 190540

Total Nevastane SH 68 - Compressors, pneumatic and hydraulic oils - 190540

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +
Total Nevastane SH 100 - Compressors, pneumatic and hydraulic oils - 190543

Total Nevastane SH 100 - Compressors, pneumatic and hydraulic oils - 190543

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +
Total Lunaria SH 68 - Compressor Oil - 157423

Total Lunaria SH 68 - Compressor Oil - 157423

 

Full-synthetic PAO based oil for ammonia (R 717) refrigerating compressors.

 

Applications:

  • Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
  • PAO (polyalphaolefin) base oils to improve oil drain interval and ensure good performances even at very low temperature.
  • Field of application : evaporator temperature down to -50°C.

 

Specifications:

  • APV, BOCK, J&E HALL, GRAM, GRASSO, HOWDEN, SABROE.
  • NSF-H1 registered - certificate number: 139826: LUNARIA SH 46, 139827: LUNARIA SH 68

 

Advantages:

  • High resistance to oxidation in the presence of ammonia. Synthetic base oils and additivation system specially selected to avoid the formation of black sludges (reaction between oil and ammonia).
  • Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, thereby providing excellent heat exchange.
  • Very high flash point given the low volatility of LUNARIA SH oils: oil consumption is reduced by 30 to 50% compared with conventional oils.
  • Good compatibility with common elastomers (chloroprene, NBR….).

 

Pack sizes available - 20ltr

Discover More +
Total Orites DS 125 - Synthetic Polyalkyleneglycol Lubricant - 112639

Total Orites DS 125 - Synthetic Polyalkyleneglycol Lubricant - 112639

 

Synthetic lubricant of type Polyalkyleneglycol (PAG) with inherent anti-wear properties.

 

Applications:

  • « Once through » lubrication of Ethylene (hyper-)compressors.
  • Meets the food-grade polyethylene production requirements.

 

Specifications:

  • ISO 6743-3, DGC class (Gases with high solubility in mineral oil that reduce viscosity).
  • Recommended by SULZER-BURCKHARDT.

 

Advantages:

  • Highly increased lifetime of packings.
  • High oil film resitance towards Ethylene and good lubricity.
  • Outstanding viscosity / pressure behaviour.
  • Good behaviour in Polyethylene.
  • Does not contains any anti-oxidant that could interfere with the process.
  • Food-grade approval of the end-product which is colour- and odourless.

 

Pack sizes available - 200kg

Discover More +
Castrol Aircol LPT 32 - Refrigeration Compresser Oil

Castrol Aircol LPT 32 - Refrigeration Compresser Oil

 

The Castrol Aircol™ LPT Range (previously called Energol™ LPT) are refrigeration compressor lubricants formulated from highly refined naphthenic base oils for use in both large and industrial and small domestic refrigeration units.

 

Application:

The Aircol LPT range is formulated to function as lubricants and coolants, as well as sealants in refrigerating compressors. They maintain good lubrication properties at the high temperatures reached during the compression phase and good fluidity at the low temperatures within the evaporators. Excellent lubrication of the moving parts in the compressor as well as recycling of the oil, entrained into the system by the refrigerant, are therefore ensured. The chemical stability of the Aircol LPT oils prevents them from reacting with the refrigerants used in refrigeration systems to form potentially disruptive breakdown products. All Aircol LPT grades are suitable for use in systems using Ammonia (NH3) or halogenated hydrocarbons. They can also be used where good low temperature flow properties are required in the lubricant.

 

Advantages:

The Aircol LPT Range oils ensure long and trouble-free operation of refrigeration systems through a combination of:

  • High thermal and chemical stability.
  • Good temperature / viscosity behaviour.
  • Good low temperature flow properties.

 

Pack sizes available - 20ltr cans

Discover More +
Castrol Aircol LPT 46 - Refrigeration Compresser Oil

Castrol Aircol LPT 46 - Refrigeration Compresser Oil

 

The Castrol Aircol™ LPT Range (previously called Energol™ LPT) are refrigeration compressor lubricants formulated from highly refined naphthenic base oils for use in both large and industrial and small domestic refrigeration units.

 

Application:

The Aircol LPT range is formulated to function as lubricants and coolants, as well as sealants in refrigerating compressors. They maintain good lubrication properties at the high temperatures reached during the compression phase and good fluidity at the low temperatures within the evaporators. Excellent lubrication of the moving parts in the compressor as well as recycling of the oil, entrained into the system by the refrigerant, are therefore ensured. The chemical stability of the Aircol LPT oils prevents them from reacting with the refrigerants used in refrigeration systems to form potentially disruptive breakdown products. All Aircol LPT grades are suitable for use in systems using Ammonia (NH3) or halogenated hydrocarbons. They can also be used where good low temperature flow properties are required in the lubricant.

 

Advantages:

The Aircol LPT Range oils ensure long and trouble-free operation of refrigeration systems through a combination of:

  • High thermal and chemical stability.
  • Good temperature / viscosity behaviour.
  • Good low temperature flow properties.

 

Pack sizes available - 208ltr barrels

Discover More +
Castrol Aircol LPT 68 - Refrigeration Compresser Oil

Castrol Aircol LPT 68 - Refrigeration Compresser Oil

 

The Castrol Aircol™ LPT Range (previously called Energol™ LPT) are refrigeration compressor lubricants formulated from highly refined naphthenic base oils for use in both large and industrial and small domestic refrigeration units.

 

Application:

The Aircol LPT range is formulated to function as lubricants and coolants, as well as sealants in refrigerating compressors. They maintain good lubrication properties at the high temperatures reached during the compression phase and good fluidity at the low temperatures within the evaporators. Excellent lubrication of the moving parts in the compressor as well as recycling of the oil, entrained into the system by the refrigerant, are therefore ensured. The chemical stability of the Aircol LPT oils prevents them from reacting with the refrigerants used in refrigeration systems to form potentially disruptive breakdown products. All Aircol LPT grades are suitable for use in systems using Ammonia (NH3) or halogenated hydrocarbons. They can also be used where good low temperature flow properties are required in the lubricant.

 

Advantages:

The Aircol LPT Range oils ensure long and trouble-free operation of refrigeration systems through a combination of:

  • High thermal and chemical stability.
  • Good temperature / viscosity behaviour.
  • Good low temperature flow properties.

 

Pack sizes available - 208ltr barrels

Discover More +