Castrol Molub-Alloy 936 SF - Open gear lubricant - 4378
Compounded open gear lubricant developed specifically for use on heavy-duty equipment in mining and industrial service
Spray version used for open gears, gearings, sliding surfaces
ISO Viscosity and pack sizes available
MOLUB-ALLOY 936 SF - 12X400ML AERO
MOLUB-ALLOY 936 SF - 10x300g C'tridg
MOLUB-ALLOY 936 SF - 18KG TIN
MOLUB-ALLOY 936 SF - 190KG DRUM
CASTROL MOLUB-ALLOY™ 936 SF is a uniquely compounded open gear lubricant developed specifically for use on heavy-duty equipment in mining and industrial service. It forms a tough lubricating film on the friction surfaces which is resistant to pressure and shock loads as well as unfavourable ambient conditions.
The structural integrity and strength of the lubricating film is particularly valuable in the critical process of running in new gears because of the natural occurrence of high spots (asperities) in newly machined surfaces. The lubricating film must separate the mating surfaces sufficiently to cushion the effect of the impact of asperities, and thus minimize initial pitting which could lead to progressive and destructive pitting later.
A highly refined, viscous, paraffinic petroleum derivative is the foundation of a blended base fluid with excellent natural chemical and thermal stability. CASTROL MOLUB-ALLOY™ 936 SF is compounded to flow readily in the film-forming process, yet it resists "squeeze-out" and clings tenaciously even to gear teeth in vertical orientation.
A proprietary blend of CASTROL MOLUB-ALLOY™ lubricating solids is included in particle sized suitable for open gears to promote antiwear properties.
Rust and oxidation inhibitors are included in the formulation to protect the equipment and the lubricating film against the elements in severe climates.
All types of open gears, rails and rollers, racks and pinions, dipper sticks and other slides and shovels and draglines.
CASTROL MOLUB-ALLOY™ 936 SF may be applied via automatic lubricating systems. With the adequate equipment CASTROL MOLUB-ALLOY™ 936 SF can be pumped at temperatures down to 0°C. In case no automatic systems are available CASTROL MOLUB-ALLOY™ 936 SF can also be applied manually.
CASTROL MOLUB-ALLOY™ 936 SF forms a tough, durable lubricating film with a "cushioning" effect, even under extreme pressure and at very low speeds.
Resistant lubricating film to resist weather in severe climates
Easy and economic application of an adhesive lubricating film via automatic dispensing equipment over a wide temperature range
CASTROL MOLUB-ALLOY™ 936 SF was formulated as solvent-free lubricant and is also free of lead, antimony and barium