Kernow Oils - Lubricant Solutions

High Performance

High Performance Products

Castrol Optimol SHF Spray - Semi-synthetic Adhesive Lubricant - 3608

Castrol Optimol SHF Spray - Semi-synthetic Adhesive Lubricant - 3608

 

Synthetic chain lubricants in spray form
Chains, joint bolts, open lubricating points especially in the wet section.


ISO Viscosity and pack sizes available
Castrol OPTIMOL SHF Spray - 12X400ML AERO

 

Castrol Optimol™ SHF is a transparent, adhesive lubricant containing solvents. It is especially suited for the lubrication and protection of large-linked chains and wire ropes in the wet section. For application points with difficult access OPTIMOL SHF SPRAY is recommended.

 

Application

Chains, wire ropes, guides, slide ways.
In wet sections and underwater applications.
Temperature application range: - 25°C/- 13°F to + 180°C/+ 356°F

 

Conditions Of Use

Carefully close container after use to prevent the solvent from evaporating.
OPTIMOL SHF can be applied on wet surfaces.
OPTIMOL SHF can be applied with a clean brush.
When using a spray gun OPTIMOL SHF can be diluted with conventional solvents.
For lubrication points with difficult access the application of OPTIMOL SHF SPRAY (article no.08432) is recommendable. Easy application due to special ball valve for all spraying directions.
Shake spray can well before use. It produces a foam which remains until the lubricant has penetrated into the friction point.

Discover More +
Castrol Optimol Paste White T Spray - Assembly Paste Spray - 3616

Castrol Optimol Paste White T Spray - Assembly Paste Spray - 3616

 

Assembly paste which prevents fretting corrosion

ISO Viscosity and pack sizes available
OPTIMOL PASTE WHITE T Spray 12X400ML AERO

 

DESCRIPTION
Castrol Optimol Paste White T Spray is an assembly paste spray with mineral oil and selected white solid lubricants.

 

APPLICATION
Castrol Optimol Paste White T Spray is excellently suited for all assembly work as well as for base or thin-film lubrication. It is white and almost colourless when applied in a thin layer.
The paste prevents fretting corrosion and facilitates assembly and disassembly. It is resistant to hot and cold water and protects against corrosion. It can be used as a universal application assembly paste. It prevents fretting corrosion especially when exposed to vibrations and avoids stick-slip. It is used for machines subject to frictional vibrations, avoids squeaking noises in hydraulic cylinders and open lubrication points. Its temperature range is from -30ºC to +250ºC

Discover More +
Castrol Obeen FS 2 - Physiologically safe special grease - 3757

Castrol Obeen FS 2 - Physiologically safe special grease - 3757

 

OBEEN™ FS 2 is a physiologically safe, fully synthetic (free from mineral oil), special grease. It is especially suited for the food, beverage and pharmaceutical industries where there might be a direct contact between the lubricant and the foodstuff or its packaging. OBEEN FS 2 only contains raw materials which are listed in the Guideline of Security 21 CFR 178.3570 of the FDA and which are in conformity with NSF H1.

 

Application

As bearing grease in the food industry for the lubrication of rolling and sliding bearings at high speeds like in fillers, closing machines etc. as well as various household appliances and machines in the pharmaceutical and cosmetic industries.

 

 

User benefits include:

  • Physiologically safe
  • Tasteless and odourless
  • Good adhesion
  • Resistant to hot and cold water
  • Excellent resistance to cleaning agents and disinfectants
  • Compatible with sealing materials resistant to mineral oil
  • Temperature application range: - 30°C/- 22°F to + 140°C/+ 284°F
  • Good behaviour at low temperatures

 

Additional Information:

  • Please observe the specifications of the plant and machine manufacturers.
  • OBEEN FS 2 is not suited for the lubrication of seals made of EPDM materials.

 

Pack sizes available - 20x400g Cartridges, 17kg Can

Discover More +
Castrol Longtime HS 1.5 - High Speed Spindle Bearing Grease - 3759

Castrol Longtime HS 1.5 - High Speed Spindle Bearing Grease - 3759

 

Castrol Longtime™ HS 1.5 is a synthetic high performance grease based on novel thickener-technology. It has excellent mechanical and shear stability and extraordinary resistance against water and humidity as well as metalworking fluid emulsions.

 

Application

  • Lubrication of extreme fast running roller and slide bearings (spindle-bearings).
  • For long-term and lifetime lubrication in high speed bearings even under difficult operating conditions.
  • For Bearing-lubrication even under strong influence of emulsions or water.
  • Temperature application range: - 40°C to + 120°C.

 

 

User benefits include:

  • Excellent mechanical and shear stability.
  • Extraordinary resistance against water and metalworking fluid emulsions.
  • Decreased grease consumption and longer bearing lifetime.
  • Extraordinary corrosion-protection even under the influence of emulsions.
  • Extraordinary stable grease consistency even under the influence of emulsions.
  • Improved machine availability due to extended grease intervals and reduced downtime.
  • Very high wear protection.

 

Additional Information:

  • Speed Factors are to be used as a guide depending on the type and size of the rolling bearing and the operating conditions.
  • Longtime HS 1.5 is compatible with all other thickening systems, however to realise the full benefits all previous grease should be removed.

 

Pack sizes available - 4x380g, 1kg, 5x1kg

Discover More +
Castrol Optimol Paste White T - White paste for clean assembly work - 3760

Castrol Optimol Paste White T - White paste for clean assembly work, prevents fretting corrosion - 3760

 

OPTIMOL™ PASTE WHITE T is excellently suited for all assembly work as well as for base or thin-film lubrication. White, almost colourless when applied as thin layer. The paste prevents fretting corrosion and facilitates assembly and disassembly. It is resistant to hot and cold water and protects against corrosion.

 

Application

  • Universal application as assembly paste
  • Prevents fretting corrosion especially when exposed to vibrations
  • Avoids stick-slip
  • For machines subject to frictional vibrations
  • Avoids squeaking noises in hydraulic cylinders and open lubrication points
  • Temperature application range: -30°C/-22°F to +250°C/+482°F

 

 

User benefits include:

  • OPTITEC® - CASTROL OPTIMOL technology
  • Clean application
  • Easy assembly and disassembly
  • Prevents fretting corrosion
  • Good separating property for all types of contact
  • Resistant to hot and cold water
  • Good corrosion protection

 

Additional Information:

Clean surface. Apply even layer of OPTIMOL PASTE WHITE T with a brush or a lint-free cloth.
For paste-specific applications - cannot replace oil or grease lubrication.
In spray cans: OPTIMOL PASTE WHITE T SPRAY. - Shake spray can well before use; spray thin and even layer onto lubricating surface.

 

Pack sizes available - 20x100g Tubes, 5x1kg Tins, 5kg Tin

Discover More +
Castrol Optimol Paste PL - Black Assembly Paste with MoS2 - 3763

Castrol Optimol Paste PL - Black Assembly Paste with MoS2 - 3763

 

OPTIMOL™ PASTE PL is especially suited for highly loaded sliding surfaces as well as for base and thin-film lubrication at high pressures and temperatures. For larger surfaces and lubricating points with difficult access such as bore holes, threads and gear rims we recommend the use of OPTIMOL PASTE PL SPRAY.

 

Application

  • For screw connections, press and snug fits at high temperatures up to + 600°C/+ 1112°F
  • For sliding bearings, bushes and toothed wheels.
  • On drive trains in the automotive industry.
  • For base lubrication of slide ways, guides and joints.
  • For good separation of tool and work piece during hot shaping of metals.
  • Temperature application range: - 30°C/- 22°F up to about + 450°C/+ 842°F (in case of reduced air supply up to +600°C/+ 1112°F).

 

User benefits include:

  • OPTITEC™ - OPTIMOL technology.
  • Wide range of applications.
  • Immediate lubricating effect.
  • Easy spray application.
  • Economical in use.
  • Thermally stable.
  • Excellent emergency running properties due to especially selected solid lubricants.
  • Maximum load carrying capacity.
  • Extremely low coefficient of friction.
  • Good corrosion protection.
  • Prevents fretting corrosion.
  • Good adhesion and separation.
  • Prevents stick-slip.

 

Additional information:

  • Clean surface. Apply thin layer of OPTIMOL PASTE PL with a brush or a lint-free cloth. Remove excess paste.
  • Shake OPTIMOL PASTE PL SPRAY (article no. 08436) well before use. Hold can about 15 - 20 cm (6 to 8 inches) from lubricating point to apply thin and even layer of lubricant.
  • Only for paste-specific applications - cannot replace oil or grease lubrication.
  • Please avoid mixing with other pastes, greases or oils.

 

Pack sizes available - 5x1kg Tins

Discover More +
Castrol Optimol Paste HT - Gold-coloured separating paste for high temperatures

Castrol Optimol Paste HT - Gold-coloured separating paste for high temperatures - 3764

 

OPTIMOL™ PASTE HT is a gold-colored, high temperature assembly paste for thermally loaded screw connections and fits. The extraordinarily good separating ability at temperatures up to + 1100°C/ + 2012°F prevents burning, welding or scaling of connections even for extremely long periods of time.

 

Application

  • For screw connections and other connections in the high temperature range up to +1100°C/+2012°F
  • For fittings and instruments even when subjected to very high pressures, corrosion and thermal influences which require an assembly paste with excellent sealing properties
  • Temperature application range: - 30°C/- 22°F up to + 1100°C/+ 2012°F

 

User benefits include:

  • OPTITEC™ - OPTIMOL technology
  • Easy handling, soft and spreadable consistency
  • Extreme load bearing capacity
  • Protects against corrosion and scaling
  • Prevents welding, seizing and burning
  • Excellent separating ability
  • Limited resistance to acids and alkaline solutions
  • Good sealing effect

 

Additional Information:

  • Clean surface. Apply an even layer of OPTIMOL PASTE HT with brush or lint-free cloth.
  • To achieve a good sealing effect, apply OPTIMOL PASTE HT in sufficient quantity down to the thread root.
  • Before assembly coarse contamination should be removed from the threads with a steel brush.
  • OPTIMOL PASTE HT is only suited for paste-specific applications - it cannot replace oil or grease lubrication.
  • Please avoid mixing with other pastes, greases or oils.

 

Pack sizes available - 20x100g Tubes, 5x1kg Tins

Discover More +
Castrol Optimol Paste TA - Silver-colored high temperature paste - 3766

Castrol Optimol Paste TA - Silver-colored high temperature paste - 3766

 

OPTIMOL™ PASTE TA for screw connections up to + 1100°C/+ 2012°F. It is used as assembly paste and prevents seizing, welding or scaling. OPTIMOL PASTE TA ensures a good separating and sealing effect in high temperature and wet environments as well as under the influence of aggressive media.

 

Application

  • For assembly of components subjected to corrosion, extreme temperatures and unfavourable environments such as - screws, bushes and valves - flanged joints and threaded tube connections - positive-locking components - seals, stuffing boxes and packaging - light metal/steel friction surfaces.
  • As basic or thin film lubrication for sliding surfaces under high thermal loads
  • Temperature application range - 40°C/-40°F to + 1100°C/+ 2012°F

 

 

User benefits include:

  • OPTITEC® - CASTROL OPTIMOL technology
  • High load carrying capacity
  • Resistant to hot and cold water
  • Immediate lubricating effect
  • Economical in use
  • Limited resistance to alkalis and acids
  • Good corrosion protection
  • Good separation ability
  • Easy application (spray)

 

Additional Information:

  • Clean surfaces before application.
  • Apply even layer of OPTIMOL PASTE TA with a brush or a lint-free or leather cloth.
  • Also available in spray cans: OPTIMOL PASTE TA SPRAY. Shake spray well before use. Hold spray can about 20 cm (6 - 8 inches) from lubrication point to apply thin and even layer. Lubricate screws down to the root of the thread.
  • For paste-specific applications - cannot replace oil or grease lubrication.

 

Pack sizes available - 20x100g Tubes, 5x1kg Tins

Discover More +
Castrol Optimol Paste MP 3 - White Assembly Pastes - 3767

Castrol Optimol Paste MP 3 - White Assembly Pastes, Resistant to Water and Aggressive Media - 3767

 

OPTIMOL™ PASTE MP 3 is a white assembly paste containing solid lubricants. It is  especially suited for long-term and lifetime lubrication even under extreme mechanical and chemical conditions.

 

Application

  • Lubricating points exposed to aggressive ambient conditions.
  • For plants and machinery in the chemical industry.
  • In the automotive industry e.g. in door retainers of vehicles which are subjected to extreme influences during the manufacture.
  • Temperature application range: 35°C/- 31°F to + 180°C/+ 356°F (CASTROL OPTIMOL PASTE MP 3)

 

 

User benefits include:

  • OPTITEC™ - OPTIMOL technology
  • Clean handling
  • Largely resistant to aggressive media such as acids, alkaline solutions etc.
  • Resistant to hot and cold water
  • Compatible with elastomers
  • Optimum wear protection
  • High load carrying capacity
  • Dampens vibrations
  • Extremely adhesive
  • Excellent corrosion protection
  • For long-term and lifetime lubrication

 

Additional Information:

  • Clean surface. Apply an even layer of OPTIMOL PASTE MP 3 with hard brush or lint-free cloth.
  • Also easily pumpable in metering systems of appropriate design.
  • Maximum performance is only guaranteed if applied unmixed.

 

Pack sizes available - 5x1kg Tins

Discover More +
Castrol Optileb HY 32 - Food Grade Hydraulic Oils - 3770

Castrol Optileb HY 32 - Food Grade Hydraulic Oils - 3770



Castrol Optileb HY 32 is primarily a non-toxic hydraulic fluid, manufactured solely from FDA (United States Food and Drugs Administration) listed ingredients for use within the food processing industry, particularly where incidental contact with foodstuffs may occur. Optileb HY 32 is USDA H1 / NSF Approved certificate no. 134151.

NSF-H1 approved Hydraulic range meeting DIN 51524 part 2 HLP.


Application

Castrol Optileb HY grades have excellent anti-wear performance and can be used in hydraulic systems with all types of pumps and motors at their rated speeds and pressures. They are extremely resistant to water wash and offer excellent corrosion protection, making them also suitable for use as a light lubricating oil in wet environments or in applications where equipment is frequently washed down. It is recommended that systems being converted to Optileb HY grades are thoroughly drained and flushed before filling to prevent contamination with previous hydraulic fluid.
Optileb HY 32 is ideal for use as an airline lubricant for the lubrication of compressed air powered equipment for food and beverage processing and packaging. It is suitable for use with both manual and automatically lubricated airlines. Optileb HY 32 prevents scum build-up and vane scorching in airline motors


Advantages

  • Contain only FDA listed raw materials - Authorised by USDA for Category H1 service
  • Non staining, Non toxic - Food grade lubricant
  • Excellent anti-wear performance - Minimising component wear, giving long term reliability of pumps and motors
  • Extremely water resistant - Gives excellent corrosion protection


 

ISO Viscosity and pack sizes available
OPTILEB HY 32 – 20L & 208L
OPTILEB HY 46 – 20L

Discover More +