Kernow Oils - Lubricant Solutions

Hydraulic Oils

Castrol Hyspin AWS 46 - Antiwear Hydraulic Oils - 6019

Castrol Hyspin AWS 46 - Antiwear Hydraulic Oils - 6019

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 68 - Antiwear Hydraulic Oils - 6020

Castrol Hyspin AWS 68 - Antiwear Hydraulic Oils - 6020

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 100 - Antiwear Hydraulic Oils - 6021

Castrol Hyspin AWS 100 - Antiwear Hydraulic Oils - 6021

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 150 - Antiwear Hydraulic Oils - 6022

Castrol Hyspin AWS 150 - Antiwear Hydraulic Oils - 6022

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin Spindle Oil 10 - Spindle oil - 6026

Castrol Hyspin Spindle Oil 10 - Spindle oil - 6026

 

Castrol Hyspin™ Spindle Oil 10 is based upon highly refined mineral oil enhanced with rust and oxidation inhibitors and formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. This type of oil is also referred to as "R and O" oil.

 

Application

Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. The Hyspin Spindle Oil is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin Spindle Oil is classified as follows:
DIN 51502 classification – HL
ISO 6743/4 - Hydraulic Oils Type HL
ISO 6743/2 – Spindle Oils Type FC

Hyspin Spindle oil meets or exceeds the following industry specifications:
Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10

 

Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Good protection of yellow metal and ferrous components helps maintain and prolong equipment life.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Controlled foaming to provide consistent lubrication under the high agitation conditions found in spindle bearings.

 

Pack sizes available: 20L & 208L

Discover More +
Castrol Hyspin Spindle Oil 22 - 6027

Castrol Hyspin Spindle Oil 22 - 6027

 

The Castrol Hyspin™ Spindle Oil range is based upon highly refined mineral oil enhanced with rust and oxidation inhibitors and formulated especially for the lubrication of high speed and precision machine tool spindle bearings.

Available in: 20L, 208L drums

 

Application

Castrol Hyspin Spindle Oil has been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. The Hyspin Spindle Oil is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin Spindle Oil is classified as follows:
DIN 51502 classification – HL
ISO 6743/4 - Hydraulic Oils Type HL
ISO 6743/2 – Spindle Oils Type FC

Hyspin Spindle oil meets or exceeds the following industry specifications:
Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22
Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10
Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

 

Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Good protection of yellow metal and ferrous components helps maintain and prolong equipment life.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Controlled foaming to provide consistent lubrication under the high agitation conditions found in spindle bearings.

 

Note: For viscosities above 22 cSt use the relevant R&O Hydraulic Oil (Castrol Hyspin VG range)

Discover More +
Castrol Hyspin Spindle Oil E 5 - Spindle oil - 6028

Castrol Hyspin Spindle Oil E 5 - Spindle oil - 6028

 

Castrol Hyspin™ Spindle Oil E5 is based upon highly refined mineral oil enhanced with rust and oxidation inhibitors and formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. This type of oil is also referred to as "R and O" oil.

 

Application

Castrol Hyspin Spindle Oils are designed for use in all types of high speed spindle bearings and seal oil systems. The Hyspin Spindle Oil is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin Spindle Oil is classified as follows:
DIN 51502 classification - HL.
ISO 6743/4 - Hydraulic Oils Type HL.
ISO 6743/2 - Spindle Oils Type FC.

 

 

User benefits include:

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Good protection of yellow metal and ferrous components helps maintain and prolong equipment life.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Controlled foaming to provide consistent lubrication under the high agitation conditions found in spindle bearings.

 

Pack sizes available - 20L, 208L drums

Discover More +
Castrol Hyspin Spindle Oil ZZ 2 - Spindle Oil - 6029

Castrol Hyspin Spindle Oil ZZ 2 - Spindle Oil - 6029

 

The Castrol Hyspin Spindle Oil ZZ range of oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.
Castrol Hyspin Spindle Oil ZZ is suitable for all types of high speed spindle bearings (including textiles) and can be used in certain hydraulic systems.

ISO Viscosity and pack sizes available:
Castrol Hyspin Spindle Oil ZZ 2 - 208L

Discover More +
Castrol Castrol Anvol WG 46 - Fire Resistant Hydraulic Fluid - 6030

Castrol Anvol WG 46 - Fire Resistant Hydraulic Fluid - 6030

 

FM Approved fire-resistant hydraulic oil.
May be used in vane, gear or piston pumps with pressures up to 3000psi.
See full PDS for seal, metal and filter compatibility.

 

DESCRIPTION
Castrol Anvol WG 46 is an HF-C type water-glycol fire resistant hydraulic fluid, fully meeting the requirements of the 7th Luxembourg Report. Castrol Anvol WG 46, being a true solution of glycol in water, is inherently stable, has a long storage life and does not suffer from the separation problems which sometimes arise with emulsion type fire resistant fluids.

 

ISO Viscosity and pack sizes available:

ANVOL WG 46 - 208L

Discover More +
Castrol Hyspin HVI 15 - High viscosity index anti-wear hydraulic oils - 6035

Castrol Hyspin HVI 15 - High viscosity index anti-wear hydraulic oils - 6035

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +