Castrol Perfecto XEP 46 - Premium Antiwear Turbine Lubricant - 2117
The Castrol Perfecto™ XEP turbine lubricants are based upon premium quality mineral oils enhanced with rust and oxidation inhibitiors to give maximum protection at high temperatures. They also contain antiwear additives to give additional load carrying properties.
The Perfecto XEP range is recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. Perfecto XEP lubricants possess superior air release performance, good resistance to foaming and excellent water separation properties. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common oil supply. Perfecto XEP lubricants contain a load carrying additive and can be used in geared turbines with a common oil reservoir. They are fully compatible with nitrile, silicone and fluropolymer seal materials.
Superior resistance to oxidation & thermal degradation provides a very long life lubricant because of low deposit / lacquer formation.
Antiwear properties including FZG 9 rating under A8.3/90 test conditions means it’s suitable for geared turbine applications and for a wide range of other applications (e.g. pumps, motors, compressors, hydraulics, and turbocouplings) thereby rationalising the lubricants required on site.
Suitable for the lubrication of both gas and steam turbines makes it suitable for combined cycle generating stations.
Superior air release properties means it meets the requirements of all turbine manufacturers.
Excellent water separation and corrosion inhibition means reduced down time through prolonged lubricant life and increased equipment reliability.
Perfecto XEP meets the requirements of:
British Standard BS 489 DIN 51515-1 and -2
General Electric GEK 32568F, 101941 and 107395A (ISO 32)
Alstom HTDG 90 117 (formerly ABB) (ISO 32 and 46)
Siemens TLV 9013 04 and 05 (ISO 32 and 46)
Pack sizes available - 208ltr drums, bulk delivery