High Performance

Castrol Tribol GR SW 460-1


Castrol Tribol GR SW 460-1 High Performance Grease for Wind Turbines


Castrol Tribol GR SW 460-1 is a lithium complex-based grease containing a synthetic base fluid working in combination with Castrol’s unique MicroFlux Trans – Plastic Deformation (MFT-PD) additive technology. The wax-free nature of the synthetic base oil and the low coefficient of friction provide excellent low-temperature pumpability as well as very low starting and running torque. It can also offer the potential for energy savings and can reduce operating temperatures in the load zone of rolling and sliding element bearings.

The lithium complex thickener gives excellent adhesion, structural stability, sealing effects and water resistance. Primarily intended for a wide variety of applications at extremes of temperature, the grease also has a high level of chemical stability and provides excellent protection against wear, rust and corrosion.

The MFT -PD additive technology provides unsurpassed wear protection and an extremely low coefficient of friction even under extremes of pressure, vibration, and shock loads, at high or low speeds. Under severe load, components of the MFT-PD additive combination are activated, initiating an improvement of surface friction characteristics through plastic deformation.

Unlike the case with conventional lubricants, the layer formed by MFT-PD provides excellent lubricity and adhesion. The load-carrying area is improved and a hydrodynamic lubrication film is easier to maintain. This unique physio-chemical reaction achieves a non-sacrificial micro-smoothing of the friction surfaces.


Tribol GR SW 460-1 is recommended for tough industrial applications especially as encountered in Wind Turbine Main Bearings, Pitch and Yaw Bearings It gives outstanding bearing protection under high loads at low to moderate speeds and in applications where water resistance is critical.

A very important feature is to help to reduce wear from static vibration known as false brinelling and from sliding motion due to axial thrust. These are the most prominent failure modes in Wind Turbine main bearings.


Castrol Tribol GR SW 460-1 High-Performance Grease for Wind Turbines Product Advantages:

  • Reduced downtime and maintenance costs because of reduced wear, rust and corrosion.
  • Reduction in bearing failures on account of better wear control from axial thrust.
  • Reduced pitting risk due to low coefficient of friction
  • Minimised wear from static vibration (false brinelling)
  • Outstanding high and low-temperature performance.
  • Extended service life with longer intervals between re-lubrication.
  • Reduced energy consumption due to low friction coefficient.
Operating temperatureMin. -40°C
Max. 180°C
Viscosity460 mm/s² at 40°C
Oil typePAO
ThickenerLithium Complex
Product typeGreases
Applicable to these sectorsWind


All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.

Contact Us

Safety Data Sheet

Castrol Tribol GR SW460 High Performance Lubricant Oil
20 x 400g

Request a quote for this product