Castrol EDGE Professional H 0w-20
01736 757002VISCOSITY - SAE 0w-20
Castrol EDGE Professional H 0w-20 Boosted with TITANIUM FST - Strength for Maximum Performance
Castrol EDGE Professional, boosted with TITANIUM FST, provides outstanding oil strength for today’s engines that work harder, with higher pressures than ever before.
Castrol EDGE Professional is Castrol’s strongest and most advanced range of engine oils. Its TITANIUM FST doubles its film strength, preventing oil film breakdown and reducing friction helping your engine perform at its best.
Castrol EDGE Professional is now certified CO2 neutral according to the highest global standards. Engineered with micro-filtration to meet Castrol Professional’s new quality standard and verified using our new Optical Particle Measurement System to guarantee product quality
Castrol EDGE Professional H 0W-20 is suitable for use in automotive gasoline engines where the manufacturer recommends an API SN, ILSAC GF-5 or earlier specification 0W-20 lubricant and is recommended and approved for use in Honda vehicles that require a 0W-20 lubricant.
Castrol EDGE Professional H 0W-20 gives you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring high performance and lowest viscosity oils.
Castrol EDGE Professional H Engine Oil Range Advantages:
- Maximises short and long-term engine performance
- Reduces engine deposits to help maximise engine response
- Delivers complete protection across a variety of engine speeds, conditions and temperatures
- Sustains maximum performance even when under pressure
- Independently proven to improve engine efficiency
- Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
- Delivers the highest levels of fuel efficiency
- Excellent performance at low temperatures
| Name | Method | Units | Castrol EDGE Professional H 0W-20 |
| Density @ 15°C, Relative | ASTM D4052 | g/ml | 0.85 |
| Viscosity, Kinematic 100°C | ASTM D445 | mm²/s | 8.9 |
| Viscosity, CCS -35°C (0W) | ASTM D5293 | mPa.s (cP) | 3860 |
| Viscosity, Kinematic 40°C | ASTM D445 | mm²/s | 39 |
| Viscosity Index | ASTM D2270 | None | 220 |
| Flash Point, PMCC | ASTM D93 | °C | 220 |
API SN
ILSAC GF5
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
