Kernow Oils - Lubricant Solutions

Filter Your Results...


Also filter...

By Brand...


BP Energol GR-XP 460 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 460 - Industrial Extreme Pressure Gear Oil


The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving
demands of smaller and higher output gear boxes.


The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender



  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Energol OGL 461 - Open Gear Lubricant

BP Energol OGL 461 - Open Gear Lubricant


Energol OGL series are advanced technology open gear lubricants incorporating both extreme pressure additives and finely dispersed graphite for load carrying. They are intended primarily for the lubrication of large, slow to medium speed, heavily loaded gears. In addition to providing outstanding load carrying, they are formulated to have excellent adhesion and resistance to "fling-off" under extreme pressure conditions.
Energol OGL 461 is a NLGI 2 grade Lithium soap thickened product based on a ISO 460 mineral base oil.
Energol OGL 1500 is a semi-fluid NLGI 00 grade thickened with Lithium soap and based on a ISO 1500 base oil.
Due to the exceptionally high base oil viscosity of Energol OGL 1500, this product is particularly suited to the most arduous applications under sever conditions of high load and low speed.
The low temperature properties and pumpability of Energol OGL 1500 are suited to spray applications under a wide variety of conditions. The products is easily pumped from drum to application spray nozzles with conventional transfer pumps.
The exceptional FZG gear test performance of Energol OGL products demonstrates a high level of protection against wear and scuffing.
Energol OGL series are lead-free and chlorine-free. They contain no solvent or diluent and pose minimal environmental concern. Absence of solvent or diluents also enables the products to maintain full specification during storage and use.


Energol OGL series are recommended for the lubrication of large, heavily loaded slow moving open gears in heavy duty industrial applications as found in the steel, cement, paper, chemical and mining industries - with the 1500 grade being particularly suited to the most severe high-load and low-speed conditions.
They can be used in these applications where the operating temperatures are high, for example, ring gears on cement kilns and ball mills. They also have applications in plain bearings where the high base oil viscosities and high graphite content give additional protection.


Main Benefits
Energol OGL series provide the following benefits:

  • Outstanding load-carrying and anti-wear properties for superior protection against wear
  • Good protection against rust and corrosion leading to longer equipment life, reduced downtime and reduced maintenance costs
  • Reduced consumption and lower lubricant costs arising from the good adhesive nature of the product
  • Minimal impact on the environment because of the absence of lead, nitrite and solvent
  • Energol OGL 1500 is suitable for the most arduous conditions and has excellent pumpability and sprayability giving improved lubrication and reduced energy consumption
Discover More +