BP

BP Energol GR-XP 150 - Premium Industrial Gear Oil

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

• David Brown Industries Ltd
• PIV
• Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

Main Benefits

• Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
• Maximum protection against corrosion and wear.

BP Energol RC-R 46 - Premium Air Compressor Oil

Description
These oils are formulated from highly refined mineral base oils, and incorporate additives that minimize oxidation, deposit-formation, foaming and filter-blocking.
Furthermore, they enhance load-carrying and antiwear properties and combat the effects of water contamination and prevent corrosion.

Applications

Energol RC-R grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil-flooded screw type with delivery temperatures of up to 120 °C. Under these conditions it is important that the oil maintains its high lubrication performance. The grades in this range are suitable for both static and mobile systems, operating at ambient temperatures ranging from -25 °C to 50°C. Most rotary applications call for ISO 32 or ISO 46 grades and the higher-viscosities ISO 68 and 100 may be used satisfactorily in reciprocating compressors.
The Energol RC-R oils meet the requirements of the following standards:

• ISO DP 6521 for mineral oils
• L-DAA and L-DAB for reciprocating air compressors
• L-DAH and L -DAG for rotary air compressors DIN 51352 p. II (Pneurop Oxidation Test) and DIN 51506 VD-L

These oils are approved by:

• Atlas Copco -Sullair
• Compair / Luchard -Crepelle
• Burton Corblin -Consolidated Pneumatic Tool

Main Benefits

• Low deposit-forming tendency
• Prevention of oil-filter blockage in the presence of water.
• Excellent anti-wear performance to extend service life of compressors.
• Rapid separation of oil/air in the air -coalescer for long air-filter life and lower oil-carryover.
• Powerful water -separation and anti-corrosion characteristics to counter adverse effects of moisture contamination.

BP Energol THB 32 - Turbine Oil

Description
The Energol THB range has been developed to meet the lubrication requirements for turbines and turbo compressors where a mineral-based oil is required.
The additive treatment ensures good anti-oxidation, anti-corrosion and demulsification properties, and absence of foaming in service.

Applications
The grades in this range meet the lubrication requirements of steam turbines, but are also suitable for gas turbines and compressors.
Energol THB is adequate for equipment where manufacturers specify or accept a TOST life of 4000 hours (to acidity level 2.0 mgKOH/g).
Meets BS 489:1999
Meets DIN 51515

Main Benefits

• Long service life
• Wide range of applications
• Trouble-free operation for extended periods

BP Energol THB 46 - Turbine Oil

Description
The Energol THB range has been developed to meet the lubrication requirements for turbines and turbo compressors where a mineral-based oil is required.
The additive treatment ensures good anti-oxidation, anti-corrosion and demulsification properties, and absence of foaming in service.

Applications
The grades in this range meet the lubrication requirements of steam turbines, but are also suitable for gas turbines and compressors.
Energol THB is adequate for equipment where manufacturers specify or accept a TOST life of 4000 hours (to acidity level 2.0 mgKOH/g).
Meets BS 489:1999
Meets DIN 51515

Main Benefits

• Long service life
• Wide range of applications
• Trouble-free operation for extended periods

BP Energol THB 68 - Turbine Oil

Description
The Energol THB range has been developed to meet the lubrication requirements for turbines and turbo compressors where a mineral-based oil is required.
The additive treatment ensures good anti-oxidation, anti-corrosion and demulsification properties, and absence of foaming in service.

Applications
The grades in this range meet the lubrication requirements of steam turbines, but are also suitable for gas turbines and compressors.
Energol THB is adequate for equipment where manufacturers specify or accept a TOST life of 4000 hours (to acidity level 2.0 mgKOH/g).
Meets BS 489:1999
Meets DIN 51515

Main Benefits

• Long service life
• Wide range of applications
• Trouble-free operation for extended periods

BP Energrease HTG 2 - High temperature bearing grease

Description
Energrease HTG 2 is a non melting grease for the lubrication of bearings at high temperatures. It has no drop point.
This grease is based on an oxidation resistant, thermally stable base oil and an inorganic thickener.

Applications
Energrease HTG 2 is suitable for the lubrication of rolling and plain bearings of all sizes and types at high temperature, such as in carriages for hardening, drying in tunnel ovens, also in bearings of bitumen mixing plants, cranes in foundries, hot air blowers, etc. Energrease HTG 2 can be used at a temperature range of -20 to +150 °C, and for short periods at a temperature of up to +220 °C. Where high temperatures are combined with high speed, more frequent re-greasing or grease change is necessary.

Main Benefits

• High oxidation stability
• Wide range temperature of application
• Easy to dispense
• Good protection against corrosion
• Reduces mechanical wear

BP Energrease L21 M - Lithium Grease with Molybdenum Disulphide

Description
Energrease L 21 M is a lithium-based grease with molybdenum disulphide and containing corrosion and anti-oxidant additives.

Applications
Energrease L 21 M is intended for general lubrication applications of vehicles and off-highway equipment. In particular, slow-moving and heavily loaded equipment and machinery that operates with a reciprocating or short-stroke motion.
Operating temperatures range is -25°C to +130°C.

Meets the requirements of Caterpillar for a MoS2 grease and Ford specification ESA M1C 71A/75A.

Main Benefits

• Good load carrying capability
• Corrosion resistance
• Resistance to wash-off by water
• Good shear-stability and resistance to vibration

BP Energrease LS-EP 00 - Multipurpose EP Lithium-base Greases

Description
The Energrease LS-EP range are high quality lithium based greases incorporating solvent-refined oils, an anti-wear additive, oxidation and corrosion inhibitors, which help to ensure long service life of the grease and a high level of protection for metal surfaces.
All grades are water-resistant, and have multi-purpose capability.

Applications
The Energrease LS-EP greases are intended for use in plain and roller bearings of all kinds of machinery - including electric motors. machine tools, textile, paper-making, plastic processing and woodworking machines as well as construction equipment .
They are recommended for use where surfaces are subjected to heavy or shock loading. The operating temperatures are between -25°C and 140 °C.
The Energrease LS-EP greases meet the British Timken requirements for use in steel mills.

Main Benefits

• Suitable for highly loaded applications
• Multi-purpose capability
• Long service life
• Resistance to water wash off
• Good pumpability
• Good shear stability and vibration resistance

BP Energrease LS-EP 1 - Multipurpose EP Lithium-base Greases

Description
The Energrease LS-EP range are high quality lithium based greases incorporating solvent-refined oils, an anti-wear additive, oxidation and corrosion inhibitors, which help to ensure long service life of the grease and a high level of protection for metal surfaces.
All grades are water-resistant, and have multi-purpose capability.

Applications
The Energrease LS-EP greases are intended for use in plain and roller bearings of all kinds of machinery - including electric motors. machine tools, textile, paper-making, plastic processing and woodworking machines as well as construction equipment .
They are recommended for use where surfaces are subjected to heavy or shock loading. The operating temperatures are between -25°C and 140 °C.
The Energrease LS-EP greases meet the British Timken requirements for use in steel mills.

Main Benefits

• Suitable for highly loaded applications
• Multi-purpose capability
• Long service life
• Resistance to water wash off
• Good pumpability
• Good shear stability and vibration resistance

BP Energrease LS-EP 2 - Multipurpose EP Lithium-base Greases

Description
The Energrease LS-EP range are high quality lithium based greases incorporating solvent refined oils, an anti-wear additive, oxidation and corrosion inhibitors, which help to ensure long service life of the grease and a high level of protection for metal surfaces. All grades are water resistant, and have multi-purpose capability.

Applications
The Energrease LS-EP greases are intended for use in plain and roller bearings of all kinds of machinery - including electric motors. Machine tools, textile, paper-making, plastic processing and woodworking machines as well as construction equipment.
They are recommended for use where surfaces are subjected to heavy or shock loading. The operating temperatures are between -25°C and 140 °C.
The Energrease LS-EP greases meet the British Timken requirements for use in steel mills.

Main Benefits

• Suitable for highly loaded applications
• Multi-purpose capability
• Long service life
• Resistance to water wash off
• Good pumpability
• Good shear stability and vibration resistance