Kernow Oils - Lubricant Solutions

Marine

Castrol Hyspin HVI 68 - High viscosity index anti-wear hydraulic oils - 6039

Castrol Hyspin HVI 68 - High viscosity index anti-wear hydraulic oils - 6039

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Castrol Hyspin HVI 100 - High viscosity index anti-wear hydraulic oils - 6040

Castrol Hyspin HVI 100 - High viscosity index anti-wear hydraulic oils - 6040

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Castrol Hyspin AWH-M 32 - Hydraulic systems - 6154

Castrol Hyspin AWH-M 32 - Hydraulic systems - 6154

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 46 - Hydraulic systems - 6155

Castrol Hyspin AWH-M 46 - Hydraulic systems - 6155

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 68 - Hydraulic systems - 6156

Castrol Hyspin AWH-M 68 - Hydraulic systems - 6156

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 100 - Hydraulic systems - 6157

Castrol Hyspin AWH-M 100 - Hydraulic systems - 6157

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 150 - Hydraulic systems - 6158

Castrol Hyspin AWH-M 150 - Hydraulic systems - 6158

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Transaqua HT - Water-based subsea production control fluid - 155DF1

Castrol Transaqua HT - Water-based subsea production control fluid - 155DF1

 

Castrol Transaqua™ HT is a water-based hydraulic control fluid specifically formulated for use as the control medium in subsea production control systems. The fluid incorporates all the features required for operation throughout the control system including Sub Surface Safety Valves (SSSV) and intelligent well completions. Transaqua HT has been developed and qualified under a Quality Management System with ISO 9001 Certification for Research and Development. Qualification testing carried out in accordance with ISO 13628-6 Annex C (2006 E) requirements.

 

Application:

  • Designed for use in all conventional and high pressure, high temperature applications (according to API 17 TR8).
  • Can operate over a temperature range of -30ºC (-22ºF) to 180ºC (356ºF).
  • Suitable for use within Electro-Hydraulic Multiplex (EH-Mux) or direct hydraulic control systems.
  • Designed for use throughout the entire production and workover control systems, covering Topsides and Subsea applications: both open water and well bore; and Downhole from control of a single SSSV through to complex intelligent well completions.

 

Advantages:

  • Tested according to OSPAR requirements. Rigorous environmental testing has also been completed in many geographies worldwide.
  • Contains a fluorescent leak tracer to allow rapid detection of subsea leaks either visually or using a dedicated ROV mountable leak detection sensor.
  • Maintains corrosion performance with seawater contamination.
  • Tolerant of the high well temperatures encountered by those parts of the control system located at the well bore.
  • Fully compatible and miscible in all proportions with other products in the Castrol Transaqua range and most other water-based subsea control fluids.
  • Compatible with a wide range of materials commonly used in subsea control systems (see Tables 3 & 4). More detailed compatibility information is available on request.

 

Pack sizes available - 208ltr drums

Discover More +
Castrol Transaqua HT2 - Water-based subsea production control fluid - 155EA1

Castrol Transaqua HT2 - Water-based subsea production control fluid - 155EA1

 

Castrol Transaqua™ HT2 is a water-based hydraulic control fluid specifically formulated for use as the control medium in subsea production control systems. The fluid incorporates all the features required for operation throughout the control system including Sub Surface Safety Valves (SSSV) and intelligent well completions. Transaqua™ HT2 has been developed and qualified under a Quality Management System with ISO 9001:2000 Certification and an Environmental Management System with ISO 14001:2004 Certification for Research and Development. Qualification testing carried out in accordance with ISO 13628-6 Annex C (2006 E) requirements.

 

Application:

  • Designed for use in all conventional and high pressure, high temperature applications (according to API 17 TR8).
  • Can operate over a temperature range of -30ºC (-22ºF) to 180ºC (356ºF).
  • Suitable for use within Electro-Hydraulic Multiplex (EH-Mux) or direct hydraulic control systems.
  • Designed for use throughout the entire production and workover control systems, covering Topsides and Subsea applications: both open water and well bore; and Downhole from control of a single SSSV through to complex intelligent well completions.

 

Advantages:

  • Tested according to OSPAR requirements and is registered for use offshore in the UK, Netherlands and Norway. Rigorous environmental testing has been completed in many geographies worldwide.
  • Has an identical formulation to the field proven Castrol Transaqua HT with a replacement dye and ultra violet tracer.
  • Contains a leak tracer to allow rapid detection of subsea leaks either visually or using a dedicated ROV mountable leak detection sensor.
  • Maintains corrosion performance with seawater contamination.
  • Tolerant of the high well temperatures encountered by those parts of the control system located at the well bore.
  • Fully compatible and miscible in all proportions with other products in the Castrol Transaqua range and most other water-based subsea control fluids.
  • Compatible with a wide range of materials commonly used in subsea control systems (see Tables 3 & 4). More detailed compatibility information is available on request.

 

Pack sizes available - 208ltr drums

Discover More +