Kernow Oils - Lubricant Solutions

Industrial

Total Nateria MP 40 - Gas engine oil - 174096

Total Nateria MP 40 - Gas engine oil - 174096

 

New generation low ash lubricant, specifically developed to extend oil drain interval, and to protect natural gas engines.

 

Applications:

  • Lubrication of engines in power generation plants, with or without cogeneration, when the manufacturer requires an oil ash content up to 0.5%.
  • Developed for the most severe conditions: fast engines, high temperatures, small oil sump capacity.

 

Specifications:

NATERIA MP 40 performances are recognised by all major manufacturers who tested it successfully in real conditions:

  • MWM
  • Rolls-Royce
  • Meets the requirements, among others, of GE-Jenbacher and Wärtsilä.

 

Advantages:

  • Increases significantly oil drain interval, lowering the number of engine stops and the running cost.
  • Very low deposits-forming ensuring an excellent cleanliness of hot engine parts.
  • High anti-wear properties for an optimal protection of the most stressed parts.

 

Pack sizes available - 208L drums

Discover More +
Total Natraclens Fluid - Degreaser and cleaner - 152515

Total Natraclens Fluid - Degreaser and cleaner - 152515

 

A blend of natural orange oils and highly refined mineral oil to form a powerful degreaser and cleaner.

 

Applications:

  • Heavy duty cleaner for removing hydrocarbon based products such as tar, grease, carbon and bitumen.
  • Will remove waxes, adhesives, uncured paint and varnish and also oil based inks.
  • Natraclens will help clean up spillages of asphalt, creosote, chewing gum, silicon sealants and other mastics. It is ideal for cleaning combustion engines, parts washing, tank cleaning, electric motor cleaning, and adhesive residue removal.

 

 

Specifications: 

  • Natraclens is approved to BS4870 part 2 for degreasing aluminium prior to welding.
  • Complies with Department of Energy, Category 1, MA.F.F., DA.F.S. for foreshore cleaning.

 

Advantages:

  • Contains no harmful ingredients.
  • Non-Toxic.
  • Environmentally Friendly.
  • Chlorine Free - Non Ozone Depleting.
  • Energy Saving - should be used cold.
  • Can be used in normal cleaning systems.
  • Up to 90% re-usable.
  • Out -performs most chlorinated solvents.
  • Highly effective in removing all hydrocarbon based substances.

 

Pack sizes available - 205L drums

Discover More +
Total Natraclens Hand Cleaner - Solvent and Alkali-Free Hand Cleaner - 152550

Total Natraclens Hand Cleaner - Solvent and Alkali-Free Hand Cleaner - 152550

 

Applications:

  • A solvent and alkali-free hand cleaner which is kind to skin as it is solvent-free.
  • Based on specially selected detergent wetting agents in a balanced formulation giving excellent performance, leaving the hands soft and fresh-smelling.

 

Advantages:

  • Bio-degradable
  • Good stability in all temperatures and conditions
  • Anti-septic additive to treat cuts and grazes
  • Exceptional cleaning power without being harsh to the skin
  • Low foam
  • Completely soluble in water

 

Pack sizes available - 9kg, 6x3kg

Discover More +
Total Nevastane Grease Aerosol - Water Resistant Grease - 164120

Total Nevastane Grease Aerosol - Water Resistant Grease - 164120

 

Water resistant Grease for incidental food contact. In aerosol 405 ml (300 ml net).

 

Applications:

  • NEVASTANE GREASE AEROSOL is a very adhesive and translucent Aluminium Complex grease.
  • NEVASTANE GREASE AEROSOL can be used for multi-purpose applications based on its wide operating temperature range (-20°C to +150°C).
  • NEVASTANE GREASE AEROSOL is recommended for the lubrication of applications operating under the most severe conditions encountered in food processing industries - bearings, hinges, springs, chains, rails and tools.

 

Specifications:

  • The formulation of NEVASTANE GREASE AEROSOL complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE GREASE AEROSOL is NSF H1 registered: No 141724.
  • NEVASTANE GREASE AEROSOL is recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.

 

Advantages:

  • Excellent resistance to water and steam.
  • Exceptional adhesion on metal surfaces.
  • Insensitive to detergents.
  • Odour-free and colourless grease.
  • Reduces friction between plastic and metal pieces.
  • Provides good corrosion protection.
  • Delivers a powerful and precise spray pattern thanks to the mini-jet diffuser of the aerosol.

 

Pack sizes available - 12x300ml

Discover More +
Total Nevastane Silicone Safegard - Multipurpose Silicone Oil - 127665

Total Nevastane Silicone Safegard - Multipurpose Silicone Oil, suitable for incidental food contact. - 127665

 

Multipurpose Silicone Oil, suitable for incidental food contact. In aerosol (207 ml net) with Safegard Spray System.

 

Applications:

  • Nevastane Silicone Safegard contains a high viscosity silicone oil with excellent stability to provide maximum lubrication.
  • Nevastane Silicone Safegard is multipurpose with a wide operating temperature range (-40°C to +200°C): small machines and chains subject to extreme temperatures, shrink oven chains, conveyors and rails…
  • Nevastane Silicone Safegard is recommended for the lubrication of numerous applications in food processing industries.

 

Specifications:

  • The formulation of Nevastane Silicone Safegard complies with the FDA, 21 CFR, 178.3570.
  • Nevastane Silicone Safegard is NSF H1 registered: No 123529.
  • Nevastane Silicone Safegard is Kosher certified.
  • Nevastane Silicone Safegard is a biostable product, it does not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane silicone safegard is recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Very good insulating, anti-rust and anti-corrosion properties.
  • Very wide temperature range.
  • Safegard technology - spray without propellant gas: environmentally friendly.
  • Can be sprayed upside down.

 

Pack sizes available - 12x216ml

Discover More +
Total Osyris DWX 3000 - Metalworking - 115840

Total Osyris DWX 3000 - Metalworking - 115840

 

Applications:

Fluidised protection fluid with superior water displacement capability.
Osyris DWX 3000 is a water-repellent fluid that effectively eliminates all traces of water from metal surfaces. Coating the surface with a thin film to give medium-term protection.
Osyris DWX 3000 complies with Standard ISO 6743/8 (1987) : REE category.

Osyris DWX 3000 may be applied:

  • with a brush,
  • by spraying,
  • by immersion.

The film may be eliminated by:

  • diluted alkaline detergents,
  • solvents (liquid or vapour phase),
  • mechanical action.

 

Advantages:

  • Osyris DWX 3000 widely recommended for use throughout the metal rocessing industry or in electroplating applications for temporary storage.
  • Very good water-repellent capability.
  • Osyris DWX 3000 deposits a thin layer of a soft, non-drying, protective film.
  • Provides protection for six months during indoor storage and two months during outdoor, sheltered storage.
  • Rapid solvent evaporation.
  • Good resistance to humid air.

 

Pack sizes available - 19ltrs

Discover More +
Total Osyris DWX 5000 - Metalworking - 115843

Total Osyris DWX 5000 - Metalworking - 115843

 

Applications:

  • Osyris DWX 5000 is a water-repellent protective fluid, leaving an oily film on parts, providing medium-term protection.
  • Osyris DWX 5000 satisfies ISO standard 6743/8 (1987): category REE.
  • Temporary storage in the mechanical engineering industry.
  • Protection following surface treatment.

 

Advantages:

  • Very high water-repellent capability.
  • Medium protection from 8 to 10 months indoors and 3 months outdoors.
  • Osyris DWX 5000 is easily applied by soaking, spraying or with a brush owing to its high fluidity. The protective film can be removed using alkaline detergents or by solvents in the liquid or vapour phase.

 

Pack sizes available - 19ltrs

Discover More +
Total Osyris DWX 9000 - Metalworking - 151211

Total Osyris DWX 9000 - Metalworking - 151211

 

Applications:

  • Corrosion protection fluid that coats parts with a soft, fatty film a slight dewatering effect.
  • Osyris DWX 9000 complies with American Standards AXS 673, AXS 1759 grades 1 and 2, as well as with MIL-C-972 grade 3.
  • Osyris DWX 9000 complies with Standard ISO 6743/8 (1987) : category RFF.
  • Osyris DWX 9000 is fluidised by a volatile solvent.
  • Osyris DWX 9000 is recommended for protecting polished sheet metal, black sheet metal, galvanised sheet metal, strip steel and, generally speaking, all types of metal stored outside and of course, inside for a very long time.
  • Osyris DWX 9000 is suited to packaging bulky material or different types of parts in readiness for maritime transport.
  • Osyris DWX 9000 may be applied: by spraying, by immersion, with a brush.

 

Advantages:

  • Protection over very long periods:

                  - 2 months outside (exposed to the weather),
                  - 9 months outside, in covered area,
                  - 18 months when stored inside.

  • Rapid evaporation of the solvent. After evaporation of the volatile phase, Osyris DWX 9000 deposits a thick, waxy, film that is very adherent and stable.
  • Very high spreading power.
  • Excellent resistance to humidity, surface water and acid atmospheres.
  • Water-repellent properties.
  • Osyris SWX 9000 avoids corrosion caused by directly touching parts with the hands and is equally effective on polished parts.
  • Application of the fluid can be monitored: when examined under the Wood lamp, parts show a fluorescent yellow.

 

Pack sizes available - 19ltrs

Discover More +
Total Phoenix Complex EP 2 - Multipurpose Extreme Pressure Grease - 182408

Total Phoenix Complex EP 2 - Multipurpose Extreme Pressure Grease - 182408

 

Application:

  • Phoenix Complex EP 2 is a multifunctional lithium complex based grease used in loaded slide-, ball-, and rollerbearings, shock loading and wheel bearings where a wider temperature range is required.
  • General purpose grease used for industrial and automotive applications where an NLGI 2 grease is required.

 

Advantages:

  • Excellent extreme pressure and antiwear properties
  • Very good corrosion protection
  • Good thermal and mechanical stability
  • Good adhesion to metal surfaces

 

Pack sizes available - 24x400g, 12.5kg, 50kg, 180kg

Discover More +
Total Phoenix EP 1 - Multipurpose Extreme Pressure Grease - 182617

Total Phoenix EP 1 - Multipurpose Extreme Pressure Grease - 182617

 

Applications:

Phoenix EP 1 is a multifunctional lithium based grease used in loaded slide-, ball-, and roller-bearings, shock loading and wheel bearings. It's a general purpose grease used for industrial and automotive applications where an NLGI 1 grease is required.

 

Advantages:

  • Excellent extreme pressure and antiwear properties
  • Very good corrosion protection
  • Good thermal and mechanical stability
  • Good adhesion to metal surfaces

 

Pack sizes available - 180kg drums

Discover More +