Kernow Oils - Lubricant Solutions

Industrial

Total Biomoldol 7 - Demoulding - 112663

Total Biomoldol 7 - Demoulding - 112663

 

Biodegradable concrete demoulding oil.

 

Application:

  • Biodegradable concrete demoulding oil, especially for roof tiles production.
  • To be used pure by spraying on clean aluminium forms.

 

Advantages:

  • Easy roof tile demoulding.
  • Clean moulds and good surface finishing, free of dust.
  • Lower consumption compared with petroleum product.
  • Based on vegetables oils, this product is biodegradable.

 

Pack sizes available - 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Biomoldol S - Demoulding - 112665

Total Biomoldol S - Demoulding - 112665

 

Biodegradable emulsion for concrete demoulding.

 

Applications:

  • BIOMOLDOL S is recommended for the use especially on wooden moulds - with high absorption.
  • It is used where smooth surface are required.
  • Cost saving product: the recommended quantity is 10 to quantity 20 % in water.
  • Application of the diluted product is possible by: spray, brush, …
  • BIOMOLDOL S can also be used pure or diluted for anti-adhesive use for bitumen on differents materials or tools.

 

Advantages:

  • Readily biodegradable and non toxic.
  • Easy demoulding.
  • It is recommended to prepare only the volume needed for one day: a separated emulsion can be easily homogenized by stearing.
  • When the emulsion gets in contact with the concrete, the emulsion breaks down and provides a smooth film which can be absorbed on the moulds.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Caloris 23 - High temperature bentone clay grease - 140185

Total Caloris 23 - High temperature bentone clay grease - 140185

 

Applications:

  • Lubrication of slow moving mechanisms subjected to very high temperatures.
  • Allows peak temperatures up to 220°C, provided that the period of operation at this temperature is limited and that the equipment is re-greased frequently.
  • CALORIS 23 grease offers the possibility of working in a corrosive atmosphere due to its resistance to mild alkaline and acidic solutions.

Recommendation - Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system. It is recommended to clean all components before using CALORIS 23 and to avoid any mixture/dilution of the grease.

 

Specifications:

ISO 6743-9: L-XAEEA 2/3
DIN 51502: M2/3P –15

 

Advantages:

  • Excellent resistance to high temperatures.
  • Very good mechanical stability.
  • Very good anti-wear properties.
  • Resistant to mild alkaline and acidic solutions.
  • CALORIS 23 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 24x400g, 180kg drums

Discover More +
Total Caloris MS 23 - Grease - 160818

Total Caloris MS 23 - Grease - 160818

 

High temperature bentone clay grease with molybdenum disulfide.

 

Application:

  • Lubrication of slow moving mechanisms subjected to very high temperatures and repeated shocks. The presence of molybdenum disulfide will guarantee good lubrication, and avoid any jamming or sticking.
  • Allows peak temperatures up to 220°C, provided that the period of operation at this temperature is limited and that the equipment is re-greased frequently.
  • CALORIS MS 23 grease offers the possibility of working in a corrosive atmosphere due to its resistance to mild alkaline and acidic solutions.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system. It is recommended to clean all components before using CALORIS MS 23 and to avoid any mixture/dilution of the grease with conventional greases.

 

Specifications: 

ISO 6743-9: L-XAEEA 2/3
DIN 51502: MF2/3P - 15

 

Advantages:

  • Excellent mechanical stability.
  • Excellent resistance to high loads and repeated shock loading due to the presence of Molybdenum disulfide.
  • Very good anti-wear properties.
  • Resistant to mild alkaline and acidic solutions.

 

Pack sizes available - 24x400g

Discover More +
Total Carter ENS-EP 700 Aerosol - Lubricant - 140084

Total Carter ENS-EP 700 Aerosol - Lubricant - 140084

 

Lubricant coating for open gears wire ropes.

 

Applications:

CARTER ENS/EP 700 is used for lubricating:

  • Open gears rotating at low speed and high power
  • Ring gears
  • Racks and guide rails
  • Wire ropes and chains

CARTER ENS/EP 700 is made fluid by a volatile solvent to facilitate application (as an aerosol).

 

Specifications:

NF-ISO 8743-6 category CKJ-DIL

 

Advantages:

  • Excellent adherence of the lubricant film to the metal even at high temperature.
  • High anti-wear and EP properties: protects moving parts against wear and shocks.
  • Very tough film: protects metal surfaces exposed to water, abrasive dust and corrosive fumes.
  • Reduces noise and vibration.
  • Film shows good elasticity at low temperature, avoiding any phenomena of cracking or spalling.

 

Pack size available - 4x400ml

Discover More +
Total Carter ENS-EP 700 - Lubricant - 146228

Total Carter ENS-EP 700 - Lubricant - 146228

 

Lubricant coating for open gears wire ropes.

 

Applications:

CARTER ENS/EP 700 is used for lubricating:

  • Open gears rotating at low speed and high power
  • Ring gears
  • Racks and guide rails
  • Wire ropes and chains

 

Specifications:

NF-ISO 8743-6 category CKJ-DIL

 

Advantages:

  • Excellent adherence of the lubricant film to the metal even at high temperature.
  • High anti-wear and EP properties: protects moving parts against wear and shocks.
  • Very tough film: protects metal surfaces exposed to water, abrasive dust and corrosive fumes.
  • Reduces noise and vibration.
  • Film shows good elasticity at low temperature, avoiding any phenomena of cracking or spalling.

 

Pack sizes available - 180kg drums

Discover More +
Total Carter EP 100 - Mineral oils for enclosed gears - 110483

Total Carter EP 100 - Mineral oils for enclosed gears - 110483

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter EP 150 - Mineral oils for enclosed gears - 110486

Total Carter EP 150 - Mineral oils for enclosed gears - 110486

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 220 - Mineral oils for enclosed gears - 110489

Total Carter EP 220 - Mineral oils for enclosed gears - 110489

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 320 - Mineral oils for enclosed gears - 110492

Total Carter EP 320 - Mineral oils for enclosed gears - 110492

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +