Total Biomultis EP 2
VISCOSITY - ISO 150
High-performance extreme pressure biodegradable lithium grease.
DESCRIPTION
APPLICATIONS
- BIOMULTIS EP 2 is designed for on road and off road applications in environmental
sensitive areas like agriculture, public works, forest, inland and coastal shipping
(locks)… - BIOMULTIS EP 2 is a multi purpose grease, especially formulated for the lubrication of
bearings, slide bearings or universal joints. - BIOMULTIS EP 2 is adapted for the lubrication of applications operating in wet, dusty
and/or dry conditions and with medium load and speed in transport, agriculture and off
road vehicles. - BIOMULTIS EP 2 is developed for loss lubrication with very high environmental
constraints. - Always avoid contamination of the grease by dust and/or dirt when applying. Preferably
use a pneumatic pump system or cartridges.
ADVANTAGES
- Due to its multipurpose character, BIOMULTIS EP 2 may replace a wide range of
greases, allowing stock rationalization and simplification of maintenance. - Forms a durable lubrication film with a good resistance to water and variation of
temperature resulting in reduction of maintenance and down-time costs - Miscible with most other conventional soap greases.
- BIOMULTIS EP 2 does not contain lead, or other heavy metals considered harmful to
human health and the environment. - BIOMULTIS EP 2 is an ultimately biodegradable grease, with low toxicity to aquatic
organisms and contains more than 50% of renewable raw materials.
TYPICAL CHARACTERISTICS
TYPICAL CHARACTERISTICS | METHODS | UNITS | BIOMULTIS EP 2 |
Thickener | – | Lithium | |
NLGI Grade | ASTM D 217/DIN 51 818 | – | 2 |
Colour | Visual | – | Brown |
Appearance | Visual | Smooth | |
Operating temperature range | °C | – 30 to +140 | |
Penetration at 25°C | ASTM D 217/DIN51 818 | 0.1 mm | 265-295 |
Anti-rust performance SKF- EMCOR | ISO 11007 | Rating | 0/0 |
4-ball weld load | ASTM D 2596 | kgf | 315 |
4-ball wear | ASTM D 2266 | mm | 0,8 |
Dropping point | IP 396/ISO 2176 | °C | > 180 |
Base oil viscosity of the base oil at 40 °C | ASTM D 445/DIN 51 562-1/ISO 3104/ IP71 | mm²/s (cSt) | 150 |
Biodegradability | OECD 301 B | % | 63% |
APPROVAL & PERFORMANCE CLAIMS
- Environmentally Acceptable Lubricant (EAL) for the 2013 Vessel General Permit (VGP)
- ISO 6743-9: L-XCEEB 2
- DIN 51502: KP2K-30
ADDITIONAL INFORMATION
24x.4Kg, 18Kg
PACK SIZES AVAILABLE
18Kg