Kernow Oils - Lubricant Solutions

Off Road & Agricultural Other Products

Total Coolelf Auto Supra -26°C - Very long life coolant - 148020

Total Coolelf Auto Supra -26°C - Very long life coolant - 148020

 

COOLELF AUTO SUPRA -26°C is a «very long life» coolant based on monoethylene glycol and organic corrosion inhibitors. COOLELF AUTO SUPRA -26°C is a cooling liquid, that can be used in all cooling systems of combustion engines in cars, vans, trucks, buses, constructing machines and agricultural tractors. In accordance with French Decree No. 95-326 of 20th March 1995 concerning the distribution of certain substances containing monoethylene glycol, COOLELF AUTO SUPRA -26°C contains an additive to give it a bitter taste as a guarantee against accidental ingestion by children or users. COOLELF AUTO SUPRA -26°C is the top-of-range product of our cooling liquid range.

 

Applications:

  • COOLELF AUTO SUPRA -26°C is a permanent coolant that can be used during the whole year.
  • COOLELF AUTO SUPRA -26°C is ready for use, as a mix with demineralised water.
  • COOLELF AUTO SUPRA –26°C can be used for cast iron as well as aluminium engines, and also in engine radiators in aluminium or copper alloy.
  • Recommended oil change interval:

               • 650,000 km/8000 hours/5 years when used in trucks
               • 250,000 km/5 years when used in cars.

 

Specifications:

COOLELF AUTO SUPRA -26° meets the international specifications for antifreezes as well as those of major manufacturers.

The antifreeze used in COOLELF AUTO SUPRA –26°C is officially approved by the following manufacturers: AUDI, DAIMLER - MB-Approval 325.3 (concentrate), DEUTZ, DEUTZ / MWM, FORD, MAN 324 Typ SNF, SEAT, SKODA, VW TL 774D

COOLELF AUTO SUPRA –26°C has been acknowledged as satisfactory for use in their engines by the following manufacturers: JAGUAR, LEYLAND TRUCKS, OPEL-GM 6277M, RENAULT VI, SCANIA, SAAB

 

Advantages:

  • Excellent protection against corrosion, erosion, and cavitation, for aluminium water pumps.
  • Heat transfer remains optimised: wholly organic additives allow avoiding any formation of deposits and left surfaces clean.
  • The additives in COOLELF AUTO SUPRA -26° give to the coolant:

                    • Chemical neutrality (pH 7-8.5),
                    • A reserve of alkalinity to neutralise the acids resulting from the combustion gases,
                    • Resistance to foaming (mainly instability of the foam that might form)
                    • Compatibility with hard water (maximum 40°F).

  • COOLELF AUTO SUPRA -26° contains no silicates, phosphates, chromates, nitrites or boron.
  • COOLELF AUTO SUPRA -26° is inert to elastomeric seals and paints.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +
Total Glacelf Auto Supra - Very long life antifreeze - 148022

Total Glacelf Auto Supra - Very long life antifreeze - 148022

 

GLACELF AUTO SUPRA is a “very long life” antifreeze based on high purity monoethylene glycol and organic corrosion inhibitors. GLACELF AUTO SUPRA antifreeze, when mixed with an appropriate quantity of water, becomes a coolant fluid recommended for all internal combustion engines in cars and vans, trucks, construction machinery and agricultural tractors. In accordance with French Decree No. 95-326 of 20th March 1995 concerning the distribution of certain substances containing monoethylene glycol, GLACELF AUTO SUPRA contains a bittering agent to give it a bitter taste as a guarantee against accidental ingestion by children or users. In our range of antifreezes, GLACELF AUTO SUPRA is the top-of-the-range product.

 

Applications:

  • GLACELF AUTO SUPRA is diluted in demineralised water (< 8°F) to form a permanent coolant that can be used throughout the year.
  • To obtain a coolant perfectly mixed, it is recommended to mix mechanically the antifreeze with the water.
  • Protection against freezing depends upon the proportions of GLACELF AUTO SUPRA in the water.

Discover More +

Total Coolelf Plus -37&#176;C - Long life coolant - 148598

Total Coolelf Plus -37°C - Long life coolant - 148598

 

COOLELF PLUS -37°C is a “long life” coolant based upon monoethylene glycol and inorganic corrosion inhibitors (silicates), a long proven coolant and heat transfer technology. It contains also an organic inhibitor, it is a semiorganic technology. COOLELF PLUS -37°C can be used in all cooling systems of combustion engines in cars, vans, trucks, buses, constructing machines and agricultural tractors. In accordance with French Decree n° 95-326 of 20th March 1995 concerning the distribution of certain substances containing monoethylene glycol, COOLELF PLUS –37°C contains an additive to give it a bitter taste, as security against accidental ingestion by children or users. COOLELF PLUS -37°C is the semi-organic product in our range of coolants.

 

Applications:

  • COOLELF PLUS -37°C is a permanent coolant that can be used during the whole year.
  • COOLELF PLUS -37°C is ready for use, as a mix with demineralised water
  • Recommended oil change interval:

               - at least 250 000 km (3000 hours) in cooling systems of commercial vehicles,
               - at least 100.000 km (800 hours) in cooling systems of passenger cars.
               - It is recommended to drain the cooling liquid after this mileage or every 3 years (whatever occurs first).

 

Specifications:

COOLELF PLUS -37°C meets the international specifications for antifreezes as well as those of major manufacturers.

The antifreeze used in COOLELF PLUS -37°C is officially approved by the following manufacturers: BMW, PORSCHE, VOLKSWAGEN TL 774 C, SEAT, SKODA, AUDI

COOLELF PLUS –37°C has been acknowledged as satisfactory for use in their engines by the following manufacturers: CHRYSLER EUROPE, OPEL-GM, SAAB, FORD

 

Advantages:

  • COOLELF PLUS -37°C offers an adequate solution against corrosion problems of all the materials in the cooling system.
  • The additives in COOLELF PLUS -37°C give the coolant:

              - A reserve of alkalinity (to neutralise the acids resulting from the combustion gases)
              - Resistance to foaming (mainly instability of the foam that might form)
              - Compatibility with hard water (maximum 40°F).

  • COOLELF PLUS -37°C is inert to elastomeric seals and paints.

 

Pack sizes available - 4x5L

Discover More +
Total HBF 4 - Synthetic fluid for brake systems - 150511

Total HBF 4 - Synthetic fluid for brake systems - 150511

 

Applications:

  • TOTAL HBF 4 is recommended for brake and clutch systems of all vehicles using synthetic fluids when a DOT 4 level is required.
  • TOTAL HBF 4 is miscible with all other synthetic fluids of similar quality.
  • TOTAL HBF 4 is not miscible with mineral based fluids (LHM) and silicon based fluids.
  • The colour of the product can vary from colourless to amber.

 

Performance:

  • SAE J 1704
  • FMVSS 116 DOT 4
  • ISO 4925 Class 4

 

Advantages:

  • Synthetic fluid.
  • Very high dry and wet boiling points adjusted to ever increasing temperatures encountered in braking systems: prevents "vapour lock".
  • Resistant to moisture absorption.
  • Viscosity suitable at cold as well as high temperatures.
  • Provides corrosion protection for metals used in braking systems : cast iron, aluminium, steel, copper, brass etc.
  • Compatible with rubber seals and hoses.

 

Pack sizes available - 12x500ml, 3x5L

Discover More +
Total 2 Stroke Oil - 152768

Total 2 Stroke Oil - 152768

 

Applications:

- For two stroke engines using Petroil mixture, e.g. motorcycles, mopeds, lawnmowers, portable chain saws. (Not suitable for outboard motors where NMMA approved TC-W oils are required - use Elf Ultimate Blend).
- Suitable also for mechanical metering systems.

 

Specifications:

- API/CEC:TC

 

Properties:

- Specially selected base oil.
- Additive treated to control piston deposits and spark plug fouling.
- Not pre-diluted
- Use with either leaded or unleaded petrol
- Low combustion chamber deposits.
- Cleaner exhaust ports and pipes.
- Maximum performance maintained for long periods.
- Bearings protected against corrosion and wear.

 

Pack sizes available - 20L, Bulk delivery

Discover More +
Total Caloris MS 23 - Grease - 160818

Total Caloris MS 23 - Grease - 160818

 

High temperature bentone clay grease with molybdenum disulfide.

 

Application:

  • Lubrication of slow moving mechanisms subjected to very high temperatures and repeated shocks. The presence of molybdenum disulfide will guarantee good lubrication, and avoid any jamming or sticking.
  • Allows peak temperatures up to 220°C, provided that the period of operation at this temperature is limited and that the equipment is re-greased frequently.
  • CALORIS MS 23 grease offers the possibility of working in a corrosive atmosphere due to its resistance to mild alkaline and acidic solutions.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system. It is recommended to clean all components before using CALORIS MS 23 and to avoid any mixture/dilution of the grease with conventional greases.

 

Specifications: 

ISO 6743-9: L-XAEEA 2/3
DIN 51502: MF2/3P - 15

 

Advantages:

  • Excellent mechanical stability.
  • Excellent resistance to high loads and repeated shock loading due to the presence of Molybdenum disulfide.
  • Very good anti-wear properties.
  • Resistant to mild alkaline and acidic solutions.

 

Pack sizes available - 24x400g

Discover More +
Total Agritraite 68 - Milking machine vacuum pumps oil - 164800

Total Agritraite 68 - Milking machine vacuum pumps oil - 164800

 

Applications:

Lubrication of specific vacuum pumps used in milking machines:
• Vane pumps.
• Screw pumps.
• Roots pumps.

 

Performance:

  • No shear.
  • Very good anti-wear properties.
  • Anti-corrosion, anti-rust, anti-foam properties.
  • No air retention.
  • Excellent desemulsibility.
  • Very good seal compatibility.

 

Pack sizes available - 3x5L

Discover More +
Total MEP Chainsaw Oil - 167839

Total MEP Chainsaw Oil - 167839

 

Applications:

  • Lubricating cutter bar of chainsaws.

 

Advantages:

  • Anti fling formulation.
  • Deep penetration of links.
  • Economical in use.
  • Approved by all major chain manufacturers.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Castrol Radicool SF - Antifreeze Coolant - 1715

Castrol Radicool SF - Antifreeze Coolant - 1715

 

Castrol Radicool SF is a long-life coolant based on monoethyleneglycol with advanced organic acid inhibitor technolgy. In contrast to traditional antifreeze coolants, Castrol Radicool SF does not contain amines, nitrites, phosphates, silicates or other inorganic inhibitors. Castrol Radicool SF provides excellent corrosion protection particularly to those engines employing light metals. It is suitable for a wide range of vehicles including cars, trucks and buses using both petrol and diesel engines. It is therefore particularly suitable for use in mixed fleets. Castrol Radicool SF works over a wide operating temperature range for effective engine cooling in all climates.

 

Application

The special inhibitor package used in Castrol Radicool SF enables longer drain intervals with excellent protection against corrosion, cooling system blockage, overheating and freezing. It is especially suitable for use in engines employing cast iron, aluminium , copper or combinations of these metals used in modern engine designs. It is also compatible with all standard rubber hoses, gaskets and seals used within the cooling system. Castrol Radicool SF possesses a longer operational life by allowing extended drain intervals of 3 years plus. Longer drain intervals mean reduced cost and less possibility of harm to the environment. Castrol Radicool SF provides excellent protection against cavitation corrosion and effective water pump lubrication , reducing wear and noise. The additive technology used in Castrol Radicool SF prevents the build up of calcium deposits (scale) from use of hard water, thereby reducing the possibility of the radiator blocking and restricted flow of coolant. This technology also improves the fluids heat transfer properties ensuring engines run at optimum temperatures.
Castrol Radicool SF is approved by a number of OEM's including Merceded Benz, Volkswagon, MAN and Ford. It is also recommended against the following vehicle manufacturer's specifications; General Motors GM 6277M, Deutz , Cummins IS series and N14 engines, Jenbacher, Komatsu, Renault Type D, Jaguar CMR 8229 and MTU MTL 5048 Series 2000C&I. Castrol Radicool SF contains a bittering agent to deter from accidental ingestion

 

Pack sizes available - 12x1ltr, 20ltr

Discover More +
Total Nateria MP 40 - Gas engine oil - 174096

Total Nateria MP 40 - Gas engine oil - 174096

 

New generation low ash lubricant, specifically developed to extend oil drain interval, and to protect natural gas engines.

 

Applications:

  • Lubrication of engines in power generation plants, with or without cogeneration, when the manufacturer requires an oil ash content up to 0.5%.
  • Developed for the most severe conditions: fast engines, high temperatures, small oil sump capacity.

 

Specifications:

NATERIA MP 40 performances are recognised by all major manufacturers who tested it successfully in real conditions:

  • MWM
  • Rolls-Royce
  • Meets the requirements, among others, of GE-Jenbacher and Wärtsilä.

 

Advantages:

  • Increases significantly oil drain interval, lowering the number of engine stops and the running cost.
  • Very low deposits-forming ensuring an excellent cleanliness of hot engine parts.
  • High anti-wear properties for an optimal protection of the most stressed parts.

 

Pack sizes available - 208L drums

Discover More +