Kernow Oils - Lubricant Solutions

Transmission & Gear

Total Carter SY 320 - Synthetic lubricant (polyglycol) - 112371

Total Carter SY 320 - Synthetic lubricant (polyglycol) - 112371

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SY 460 - Synthetic lubricant (polyglycol) - 112373

Total Carter SY 460 - Synthetic lubricant (polyglycol) - 112373

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Multagri TM 15W-30 - Multipurpose multigrade oil - 111640

Total Multagri TM 15W-30 - Multipurpose multigrade oil - 111640

 

Multipurpose multigrade oil intended for the year-round lubrication of the different systems in agricultural tractors and harvesters.

 

Applications:

  • Atmospheric or supercharged diesels, petrol service motors.
  • Conventional mechanical transmissions for which an oil type API GL4 / MIL.L.2105 SAE 80W-85 is recommended.
  • Transmission systems fitted with old type oil bath brakes.
  • Gearboxes, reduction drives, bevel gears, etc.
  • Hydraulic lift and assistance circuits.
  • Power take-offs and multidisc clutches operating in oil.
  • Hydrostatic steering systems.

 

Performance:

Complies with the requirements of the following specifications:

   - Multipurpose applications:

  • FORD M2C 159B2
  • MASSEY FERGUSON CMS M1139

   - Engine applications:

  • CCMC D2
  • API CD/SE
  • MIL.L.2104D, MIL.L.46152C

   - Tractor transmission applications:

  • JOHN DEERE J20A
  • MASSEY FERGUSON M1135

   - Mechanical transmission applications:

  • API GL4
  • MIL.L.2105

   - Automatic transmission applications:

  • CATERPILLAR TO2
  • GM ALLISON C4

 

Advantages:

  • Can reduce the number of lubricants needed on a farm.
  • High viscosity when hot ensures continuous lubrication in the engine, on gears and in hydraulic components.
  • Good wear control ensures a long life for the engine, transmission systems and hydraulic circuit components.
  • Extreme-pressure capability for lubricating transmissions that require use of an oil type API GL4 or MIL.L.2105 of viscosity SAE 80W-85.
  • Anticorrosion properties for protecting the non-ferrous metals in the engine and other systems.
  • Antifoaming qualities.
  • Totally inert to seals.
  • Resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature.

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Multagri Super 10W-30 - High performance multigrade oil (Agriculture) - 11

Total Multagri Super 10W-30 - High performance multigrade oil (Agriculture) - 111811

 

High performance multigrade oil designed for year-round multipurpose lubrication of the different systems in agricultural tractors and harvesters.

 

Applications:

  • Supercharged or atmospheric diesels, petrol service motors.
  • Conventional mechanical transmissions for which an oil type API GL4 / MIL.L.2105 SAE 80W is recommended.
  • Mechanical transmission systems with oil bath brakes.
  • Gearboxes, reduction drives, bevel gears, etc.
  • Hydraulic lift and power assistance circuits.
  • Power take-offs and multidisc clutches operating in oil.
  • Hydrostatic steering systems.

 

Performance:

Specifications - ACEA E1

Manufacturers Approvals: MASSEY-FERGUSON - CMS M 1145 / 1144, ZF : TE-ML 06B / 07B

Meets Manufacturers Specifications:

   - Multipurpose applications:

  • FORD M2C 159B1
  • MASSEY FERGUSON CMS M1139
  • JOHN DEERE JDM J27

   - Engine applications:

  • ACEA E1
  • API CE/SF

   - Tractor transmission applications:

  • JOHN DEERE JDM J20A, J20C
  • CASE 1206, 1207
  • FORD M2C86A, M2C134D, FNHA 2 C 201.00
  • MASSEY FERGUSON CMS M1127A, M1135

   - Mechanical transmission applications:

  • API GL4

   - Automatic transmission applications:

  • CATERPILLAR TO2
  • GM ALLISON C4

 

Advantages:

  • Can reduce the number of lubricants needed on a farm.
  • High viscosity when hot, ensuring continuous lubrication of the engine, gears and hydraulic components.
  • Low viscosity when cold, for appropriate engine operation in the Nordic regions and easy starting, as well as quick reacting hydraulics.
  • Outstanding wear control, ensuring long life for the engine, transmission systems and hydraulic circuit components.
  • Extreme-pressure capability for lubricating transmission systems that require the use of an oil type API GL4 or MIL.L.2105 of viscosity SAE 80W.
  • Anticorrosion properties to protect the non-ferrous metals in the engine and other systems.
  • Excellent anti-foaming qualities, to prevent any sump overflow as well as pump depriming or cavitation.
  • Completely inert to seals.
  • High resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature.
  • Special frictional characteristics, ensuring progressive, efficient and silent operation of braking and clutch systems.

 

Pack sizes available - 3x5L, 20L, 208L drums, bulk delivery

Discover More +
Total EP 80W-90 - Gear Oil - 117261

Total EP 80W-90 - Gear Oil - 117261

 

Applications:

  • Synchronized and non-synchronized gearboxes, mild loaded axles, transfer boxes.
  • All gears requiring MIL-L-2105 or API GL-4 level.
  • Approved by ZF for the lubrication of their gearboxes (without Intarder) with standard drain interval.

 

Properties:

  • High viscosity index, allowing enough fluidity at low temperature to keep the functionality of the gearbox in cold start conditions, while maintaining enough oil film thickness for optimal bearing protection.
  • High Extreme-Pressure and antiwear properties for an enhanced durability of gears and synchromeshes.
  • Good antiwear, antioxidant, antifoam, anticorrosive and antirust properties.

 

Specifications:

  • API GL-4
  • MAN 341 type E-1 / Z-2
  • ZF TE-ML 02A, 16A, 17A,19A

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Carter SH 1000 - Synthetic oil - 120615

Total Carter SH 1000 - Synthetic oil - 120615

 

Synthetic oil (PAO) for enclosed gears.

 

Applications:

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
- bevel and spur gears
- Heavily loaded bearings and gear couplings.

 

Specifications:

  • DIN 51517 Part 3 ⇒group CLP
  • NF-ISO 6743-6 category CKD

Manufacturers Approval:

  • AISI 224
  • CINCINNATI MILACRON
  • DAVID BROWN
  • FLENDER
  • USINOR FT 161
  • MÜLLER WEINGARTEN
  • AGMA 9005 - E02

 

Advantages:

  • Very high protection (high and low temperatures) from micropitting scuffing wear (GFT - class: high).
  • Excellent extreme-pressure performance: protection against high loads.
  • Very high natural viscosity index: (shear stable) and low friction coefficient.
  • Very low pour point: operation at very low temperatures.
  • Very good resistance to oxidation: operation at high temperatures, and lifetime increased by a factor of 2 to 4.
  • Compatible with seals and metals containing copper.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SH 460 - Synthetic oil - 120616

Total Carter SH 460 - Synthetic oil - 120616

 

Synthetic oil (PAO) for enclosed gears.

 

Applications:

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
- bevel and spur gears
- Heavily loaded bearings and gear couplings.

 

Specifications:

  • DIN 51517 Part 3 ⇒group CLP
  • NF-ISO 6743-6 category CKD

Manufacturers Approval:

  • AISI 224
  • CINCINNATI MILACRON
  • DAVID BROWN
  • FLENDER
  • USINOR FT 161
  • MÜLLER WEINGARTEN
  • AGMA 9005 - E02

 

Advantages:

  • Very high protection (high and low temperatures) from micropitting scuffing wear (GFT - class: high).
  • Excellent extreme-pressure performance: protection against high loads.
  • Very high natural viscosity index: (shear stable) and low friction coefficient.
  • Very low pour point: operation at very low temperatures.
  • Very good resistance to oxidation: operation at high temperatures, and lifetime increased by a factor of 2 to 4.
  • Compatible with seals and metals containing copper.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +
Total Fluidematic SYN - Synthetic Based Automatic Transmission Fluid - 120790

Total Fluidematic SYN - Synthetic Based Automatic Transmission Fluid - 120790

 

Applications:

  • Automatic transmissions and torque converters of commercial vehicles and industrial vehicles.
  • When the manufacturer requires an ATF (Automatic Transmission Fluid) meeting GM DEXRON-III.

 

Properties:

  • Very high viscosity index.
  • Very low pour point.
  • Excellent resistance to oxidation.
  • Fuel saving.

 

Performance:

  • DEXRON III-G
  • ALLISON C4 N° C4-30734001
  • MAN 339 type V-1 (ex MAN 339 Type F)
  • MAN 339 type Z-2 (ex MAN 339 Type F)
  • MB-Approval 236.5
  • VOITH H 55.633535
  • ZF TE-ML 14B, 16L

 

Pack sizes availalbe - 208L drums, bulk delivery

Discover More +
Total Elfmatic G3 - Fluid for automatic transmissions and hydraulic systems - 12

Total Elfmatic G3 - Fluid for automatic transmissions and hydraulic systems - 127702

 

Applications:

Is recommended for all automatic transmissions and hydraulic systems for which the manufacturer recommends a DEXRON III fluid:

  • Automatic gearboxes
  • Couplers and convertors
  • Power-assisted steering systems.

 

Performance:

Homologated - MAN 339 Type Z-1 & V-1, VOITH H 55.633535, ZF TE-ML 04D, 09, 14A, 17C, MB-Approval 236.9

Meets the specific requirements - NH-530B, VOLVO 97341, ALLISON C4, FORD MERCON, GM DEXRON® IIIG

 

Advantages:

  • Very high thermal stability, high antioxidant and detergent level allowing to keep the performances during a long period of use and preventing from deposits, gums and varnish formation.
  • Special friction properties giving controlled slip for friction components: gear shifting quality, demands smooth clutching action without excessive slip and free from chatter. This basic property, which depends on the relative static and dynamic friction coefficients and the variation of the latter with speed, is obtained by means of special unctuous additives.
  • High anti-wear, anticorrosion and antifoam performances.
  • Perfect neutrality with elastomers and non-ferrous metals (copper, etc…).
  • Very high viscosity index.
  • Low temperature fluidity to avoid surge or sudden overload of circuits when starting in very cold weather.
  • Precise and smooth automatic shifting even at very low speed.
  • Low pour point.

 

Pack sizes available - 18x1L, 3x5L, 20L

Discover More +
Total Fluide G3 - Fluid for automatic transmissions and hydraulic systems - 1341

Total Fluide G3 - Fluid for automatic transmissions and hydraulic systems - 134147

 

Applications:

Is recommended for all automatic transmissions and hydraulic systems for which the manufacturer recommends a DEXRON III fluid :

  • Automatic gearboxes
  • Couplers and convertors
  • Power-assisted steering systems.

 

Properties:

  • Very high thermal stability, high antioxidant and detergent level.
  • Special friction properties giving controlled slip for friction components : gear shifting quality, demands smooth clutching action without excessive slip and free from chatter.
  • High antiwear, anticorrosion and antifoam performances.
  • Perfect neutrality with elastomers and nonferrous metals (copper , etc…).
  • Very high viscosity index.
  • Low temperature fluidity to avoid surge or sudden overload of circuits when starting in very cold weather.
  • Precise and smooth automatic shifting even at very low speed.

 

Performance:

Homologated - MAN 339 Type Z-1 & V-1, VOITH H 55.633535, ZF TE-ML 04D, 09, 14A, 17C, MB-Approval 236.9, VOLVO 97341

Meets the specific requirements - NH-530B, ALLISON C4, DEXRON® IIIG, FORD MERCON

 

Pack sizes available - 18x1L, 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +