Kernow Oils - Lubricant Solutions

Transmission & Gear

Total ATF 33 - Automatic Transmission Fluid - 110465

Total ATF 33 - Automatic Transmission Fluid - 110465

 

Applications:

Can be mixed only with fluids meeting the same specification.
- Automatic or semi-automatic transmissions when a fluid meeting "type F" FORD M2C-33F (SQM-2C-9004BA) or "type G" FORD M2C-33G (SQM-2C-9007AA) is required by the manufacturer:

  • Passenger car transmissions : Ford (C3, C4, FMW before sept.80), Austin Morris*, Jaguar, Mazda, Saab*                    *BORG-WARNER transmissions
  • Powershift transmissions Shuttle (JCB).

- Can also be used as power steering or torque converter fluid when the manufacturer requires a fluid of this type.

 

Performance:

FORD M2C-33G ( former licence n° 3PE-77225 )

 

Advantages:

  • High viscosity index.
  • Very low pour point.
  • Very good thermal stability.
  • Excellent resistance to oxidation.
  • Friction properties specific to the requirements of some FORD transmissions.

 

Pack sizes available - 20L

Discover More +
Total Carter EP 100 - Mineral oils for enclosed gears - 110483

Total Carter EP 100 - Mineral oils for enclosed gears - 110483

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter EP 150 - Mineral oils for enclosed gears - 110486

Total Carter EP 150 - Mineral oils for enclosed gears - 110486

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 220 - Mineral oils for enclosed gears - 110489

Total Carter EP 220 - Mineral oils for enclosed gears - 110489

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 320 - Mineral oils for enclosed gears - 110492

Total Carter EP 320 - Mineral oils for enclosed gears - 110492

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 460 - Mineral oils for enclosed gears - 110494

Total Carter EP 460 - Mineral oils for enclosed gears - 110494

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 68 - Mineral oils for enclosed gears - 110497

Total Carter EP 68 - Mineral oils for enclosed gears - 110497

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 680 - Mineral oils for enclosed gears - 110499

Total Carter EP 680 - Mineral oils for enclosed gears - 110499

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Fluide ATX - Automatic Transmission Fluid - 110585

Total Fluide ATX - Automatic Transmission Fluid - 110585

 

Applications:

  • Automatic or semi-automatic transmissions and torque converters of passenger cars, light commercial vehicles and industrial vehicles, when the manufacturer requires an ATF (Automatic Transmission Fluid) GM DEXRON-IID. Not suitable when a fluid type FORD M2C-33F or G is required.
  • Manual gear boxes when an ATF fluid is required.
  • Hydrostatic transmissions.
  • Power steering.
  • Hydraulic systems when a fluid type GM DEXRON-IID is required.

 

Properties:

  • Very high viscosity index linked with an excellent viscosity stability in operation.
  • Very low pour point.
  • Very good thermal stability.
  • Excellent resistance to oxidation.
  • Friction properties specific to the requirements of GENERAL MOTORS Hydramatic.
  • Viscosity adapted to MERCEDES requirements MBApproval 236.6.

 

Performance:

  • BMW group 23 - 3.0 and 24 - 3.0
  • FORD MERCON
  • DEXRON-IID
  • MAN 339 type Z-1 (ex MAN 339 type D)
  • MAN 339 type V-1 (ex MAN 339 type D)
  • MB-Approval 236.6
  • VOITH H 55.6335
  • PSA PEUGEOT CITROËN S71 2102
  • ZF TE-ML 03D, 04D, 09, 11A, 14A, 17C

 

Pack sizes available - 18x1L, 20L, 208L drums, bulk delivery

Discover More +
Total Fluide II D - Fluid for automatic transmissions and hydraulic systems - 11

Total Fluide II D - Fluid for automatic transmissions and hydraulic systems - 110594

 

Applications:

  • Automatic or semi-automatic transmissions and torque converters of passenger cars, light commercial vehicles and industrial vehicles, when the manufacturer requires an ATF (Automatic Transmission Fluid) GM DEXRON-IID.
  • Manual gear boxes when an ATF fluid is required.
  • Hydrostatic transmissions.
  • Power steering.
  • Hydraulic systems when a fluid type GM DEXRON-IID is required.

 

Properties:

  • Very high viscosity index linked with an excellent viscosity stability in operation.
  • Very low pour point.
  • Very good thermal stability.
  • Excellent resistance to oxidation.
  • Friction properties specific to the requirements of GENERAL MOTORS Hydramatic.

 

Performance:

Homologated - MAN 339 Type Z-1 & V-1, VOITH H 55.633535, ZF TE-ML 04D, 09, 14A, 17C, MB-Approval 236.9

Meets the specific requirements - GM DEXRON IID, FORD MERCON

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Carter SY 320 - Synthetic lubricant (polyglycol) - 112371

Total Carter SY 320 - Synthetic lubricant (polyglycol) - 112371

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SY 460 - Synthetic lubricant (polyglycol) - 112373

Total Carter SY 460 - Synthetic lubricant (polyglycol) - 112373

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Multagri TM 15W-30 - Multipurpose multigrade oil - 111640

Total Multagri TM 15W-30 - Multipurpose multigrade oil - 111640

 

Multipurpose multigrade oil intended for the year-round lubrication of the different systems in agricultural tractors and harvesters.

 

Applications:

  • Atmospheric or supercharged diesels, petrol service motors.
  • Conventional mechanical transmissions for which an oil type API GL4 / MIL.L.2105 SAE 80W-85 is recommended.
  • Transmission systems fitted with old type oil bath brakes.
  • Gearboxes, reduction drives, bevel gears, etc.
  • Hydraulic lift and assistance circuits.
  • Power take-offs and multidisc clutches operating in oil.
  • Hydrostatic steering systems.

 

Performance:

Complies with the requirements of the following specifications:

   - Multipurpose applications:

  • FORD M2C 159B2
  • MASSEY FERGUSON CMS M1139

   - Engine applications:

  • CCMC D2
  • API CD/SE
  • MIL.L.2104D, MIL.L.46152C

   - Tractor transmission applications:

  • JOHN DEERE J20A
  • MASSEY FERGUSON M1135

   - Mechanical transmission applications:

  • API GL4
  • MIL.L.2105

   - Automatic transmission applications:

  • CATERPILLAR TO2
  • GM ALLISON C4

 

Advantages:

  • Can reduce the number of lubricants needed on a farm.
  • High viscosity when hot ensures continuous lubrication in the engine, on gears and in hydraulic components.
  • Good wear control ensures a long life for the engine, transmission systems and hydraulic circuit components.
  • Extreme-pressure capability for lubricating transmissions that require use of an oil type API GL4 or MIL.L.2105 of viscosity SAE 80W-85.
  • Anticorrosion properties for protecting the non-ferrous metals in the engine and other systems.
  • Antifoaming qualities.
  • Totally inert to seals.
  • Resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature.

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Multagri Super 10W-30 - High performance multigrade oil (Agriculture) - 11

Total Multagri Super 10W-30 - High performance multigrade oil (Agriculture) - 111811

 

High performance multigrade oil designed for year-round multipurpose lubrication of the different systems in agricultural tractors and harvesters.

 

Applications:

  • Supercharged or atmospheric diesels, petrol service motors.
  • Conventional mechanical transmissions for which an oil type API GL4 / MIL.L.2105 SAE 80W is recommended.
  • Mechanical transmission systems with oil bath brakes.
  • Gearboxes, reduction drives, bevel gears, etc.
  • Hydraulic lift and power assistance circuits.
  • Power take-offs and multidisc clutches operating in oil.
  • Hydrostatic steering systems.

 

Performance:

Specifications - ACEA E1

Manufacturers Approvals: MASSEY-FERGUSON - CMS M 1145 / 1144, ZF : TE-ML 06B / 07B

Meets Manufacturers Specifications:

   - Multipurpose applications:

  • FORD M2C 159B1
  • MASSEY FERGUSON CMS M1139
  • JOHN DEERE JDM J27

   - Engine applications:

  • ACEA E1
  • API CE/SF

   - Tractor transmission applications:

  • JOHN DEERE JDM J20A, J20C
  • CASE 1206, 1207
  • FORD M2C86A, M2C134D, FNHA 2 C 201.00
  • MASSEY FERGUSON CMS M1127A, M1135

   - Mechanical transmission applications:

  • API GL4

   - Automatic transmission applications:

  • CATERPILLAR TO2
  • GM ALLISON C4

 

Advantages:

  • Can reduce the number of lubricants needed on a farm.
  • High viscosity when hot, ensuring continuous lubrication of the engine, gears and hydraulic components.
  • Low viscosity when cold, for appropriate engine operation in the Nordic regions and easy starting, as well as quick reacting hydraulics.
  • Outstanding wear control, ensuring long life for the engine, transmission systems and hydraulic circuit components.
  • Extreme-pressure capability for lubricating transmission systems that require the use of an oil type API GL4 or MIL.L.2105 of viscosity SAE 80W.
  • Anticorrosion properties to protect the non-ferrous metals in the engine and other systems.
  • Excellent anti-foaming qualities, to prevent any sump overflow as well as pump depriming or cavitation.
  • Completely inert to seals.
  • High resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature.
  • Special frictional characteristics, ensuring progressive, efficient and silent operation of braking and clutch systems.

 

Pack sizes available - 3x5L, 20L, 208L drums, bulk delivery

Discover More +
Total EP 80W-90 - Gear Oil - 117261

Total EP 80W-90 - Gear Oil - 117261

 

Applications:

  • Synchronized and non-synchronized gearboxes, mild loaded axles, transfer boxes.
  • All gears requiring MIL-L-2105 or API GL-4 level.
  • Approved by ZF for the lubrication of their gearboxes (without Intarder) with standard drain interval.

 

Properties:

  • High viscosity index, allowing enough fluidity at low temperature to keep the functionality of the gearbox in cold start conditions, while maintaining enough oil film thickness for optimal bearing protection.
  • High Extreme-Pressure and antiwear properties for an enhanced durability of gears and synchromeshes.
  • Good antiwear, antioxidant, antifoam, anticorrosive and antirust properties.

 

Specifications:

  • API GL-4
  • MAN 341 type E-1 / Z-2
  • ZF TE-ML 02A, 16A, 17A,19A

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Carter SH 1000 - Synthetic oil - 120615

Total Carter SH 1000 - Synthetic oil - 120615

 

Synthetic oil (PAO) for enclosed gears.

 

Applications:

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
- bevel and spur gears
- Heavily loaded bearings and gear couplings.

 

Specifications:

  • DIN 51517 Part 3 ⇒group CLP
  • NF-ISO 6743-6 category CKD

Manufacturers Approval:

  • AISI 224
  • CINCINNATI MILACRON
  • DAVID BROWN
  • FLENDER
  • USINOR FT 161
  • MÜLLER WEINGARTEN
  • AGMA 9005 - E02

 

Advantages:

  • Very high protection (high and low temperatures) from micropitting scuffing wear (GFT - class: high).
  • Excellent extreme-pressure performance: protection against high loads.
  • Very high natural viscosity index: (shear stable) and low friction coefficient.
  • Very low pour point: operation at very low temperatures.
  • Very good resistance to oxidation: operation at high temperatures, and lifetime increased by a factor of 2 to 4.
  • Compatible with seals and metals containing copper.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SH 460 - Synthetic oil - 120616

Total Carter SH 460 - Synthetic oil - 120616

 

Synthetic oil (PAO) for enclosed gears.

 

Applications:

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
- bevel and spur gears
- Heavily loaded bearings and gear couplings.

 

Specifications:

  • DIN 51517 Part 3 ⇒group CLP
  • NF-ISO 6743-6 category CKD

Manufacturers Approval:

  • AISI 224
  • CINCINNATI MILACRON
  • DAVID BROWN
  • FLENDER
  • USINOR FT 161
  • MÜLLER WEINGARTEN
  • AGMA 9005 - E02

 

Advantages:

  • Very high protection (high and low temperatures) from micropitting scuffing wear (GFT - class: high).
  • Excellent extreme-pressure performance: protection against high loads.
  • Very high natural viscosity index: (shear stable) and low friction coefficient.
  • Very low pour point: operation at very low temperatures.
  • Very good resistance to oxidation: operation at high temperatures, and lifetime increased by a factor of 2 to 4.
  • Compatible with seals and metals containing copper.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +
Total Fluidematic SYN - Synthetic Based Automatic Transmission Fluid - 120790

Total Fluidematic SYN - Synthetic Based Automatic Transmission Fluid - 120790

 

Applications:

  • Automatic transmissions and torque converters of commercial vehicles and industrial vehicles.
  • When the manufacturer requires an ATF (Automatic Transmission Fluid) meeting GM DEXRON-III.

 

Properties:

  • Very high viscosity index.
  • Very low pour point.
  • Excellent resistance to oxidation.
  • Fuel saving.

 

Performance:

  • DEXRON III-G
  • ALLISON C4 N° C4-30734001
  • MAN 339 type V-1 (ex MAN 339 Type F)
  • MAN 339 type Z-2 (ex MAN 339 Type F)
  • MB-Approval 236.5
  • VOITH H 55.633535
  • ZF TE-ML 14B, 16L

 

Pack sizes availalbe - 208L drums, bulk delivery

Discover More +
Total Elfmatic G3 - Fluid for automatic transmissions and hydraulic systems - 12

Total Elfmatic G3 - Fluid for automatic transmissions and hydraulic systems - 127702

 

Applications:

Is recommended for all automatic transmissions and hydraulic systems for which the manufacturer recommends a DEXRON III fluid:

  • Automatic gearboxes
  • Couplers and convertors
  • Power-assisted steering systems.

 

Performance:

Homologated - MAN 339 Type Z-1 & V-1, VOITH H 55.633535, ZF TE-ML 04D, 09, 14A, 17C, MB-Approval 236.9

Meets the specific requirements - NH-530B, VOLVO 97341, ALLISON C4, FORD MERCON, GM DEXRON® IIIG

 

Advantages:

  • Very high thermal stability, high antioxidant and detergent level allowing to keep the performances during a long period of use and preventing from deposits, gums and varnish formation.
  • Special friction properties giving controlled slip for friction components: gear shifting quality, demands smooth clutching action without excessive slip and free from chatter. This basic property, which depends on the relative static and dynamic friction coefficients and the variation of the latter with speed, is obtained by means of special unctuous additives.
  • High anti-wear, anticorrosion and antifoam performances.
  • Perfect neutrality with elastomers and non-ferrous metals (copper, etc…).
  • Very high viscosity index.
  • Low temperature fluidity to avoid surge or sudden overload of circuits when starting in very cold weather.
  • Precise and smooth automatic shifting even at very low speed.
  • Low pour point.

 

Pack sizes available - 18x1L, 3x5L, 20L

Discover More +
Total Fluide G3 - Fluid for automatic transmissions and hydraulic systems - 1341

Total Fluide G3 - Fluid for automatic transmissions and hydraulic systems - 134147

 

Applications:

Is recommended for all automatic transmissions and hydraulic systems for which the manufacturer recommends a DEXRON III fluid :

  • Automatic gearboxes
  • Couplers and convertors
  • Power-assisted steering systems.

 

Properties:

  • Very high thermal stability, high antioxidant and detergent level.
  • Special friction properties giving controlled slip for friction components : gear shifting quality, demands smooth clutching action without excessive slip and free from chatter.
  • High antiwear, anticorrosion and antifoam performances.
  • Perfect neutrality with elastomers and nonferrous metals (copper , etc…).
  • Very high viscosity index.
  • Low temperature fluidity to avoid surge or sudden overload of circuits when starting in very cold weather.
  • Precise and smooth automatic shifting even at very low speed.

 

Performance:

Homologated - MAN 339 Type Z-1 & V-1, VOITH H 55.633535, ZF TE-ML 04D, 09, 14A, 17C, MB-Approval 236.9, VOLVO 97341

Meets the specific requirements - NH-530B, ALLISON C4, DEXRON® IIIG, FORD MERCON

 

Pack sizes available - 18x1L, 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Carter ENS-EP 700 Aerosol - Lubricant - 140084

Total Carter ENS-EP 700 Aerosol - Lubricant - 140084

 

Lubricant coating for open gears wire ropes.

 

Applications:

CARTER ENS/EP 700 is used for lubricating:

  • Open gears rotating at low speed and high power
  • Ring gears
  • Racks and guide rails
  • Wire ropes and chains

CARTER ENS/EP 700 is made fluid by a volatile solvent to facilitate application (as an aerosol).

 

Specifications:

NF-ISO 8743-6 category CKJ-DIL

 

Advantages:

  • Excellent adherence of the lubricant film to the metal even at high temperature.
  • High anti-wear and EP properties: protects moving parts against wear and shocks.
  • Very tough film: protects metal surfaces exposed to water, abrasive dust and corrosive fumes.
  • Reduces noise and vibration.
  • Film shows good elasticity at low temperature, avoiding any phenomena of cracking or spalling.

 

Pack size available - 4x400ml

Discover More +
Total Carter ENS-EP 700 - Lubricant - 146228

Total Carter ENS-EP 700 - Lubricant - 146228

 

Lubricant coating for open gears wire ropes.

 

Applications:

CARTER ENS/EP 700 is used for lubricating:

  • Open gears rotating at low speed and high power
  • Ring gears
  • Racks and guide rails
  • Wire ropes and chains

 

Specifications:

NF-ISO 8743-6 category CKJ-DIL

 

Advantages:

  • Excellent adherence of the lubricant film to the metal even at high temperature.
  • High anti-wear and EP properties: protects moving parts against wear and shocks.
  • Very tough film: protects metal surfaces exposed to water, abrasive dust and corrosive fumes.
  • Reduces noise and vibration.
  • Film shows good elasticity at low temperature, avoiding any phenomena of cracking or spalling.

 

Pack sizes available - 180kg drums

Discover More +
Total Multagri Pro-Tec 10W-40 - Agricultural Multipurpose Oil - 147627

Total Multagri Pro-Tec 10W-40 - Agricultural Multipurpose Oil - 147627

 

Last generation multipurpose oil, made of ultra high performance non conventional base oils, designed for year-round lubrication of all mechanical systems in tractors, agricultural machinery and related equipment.

 

Applications:

  • All supercharged or naturally aspirated diesels especially those meeting the EUROPE TIER 1 or TIER 2 (2002) pollution control standard.
  • Petrol engines in service vehicles.
  • Mechanical transmission systems with submerged disc brakes.
  • Gearboxes, differentials, axles, reduction drives, etc.
  • Hydraulic lift and assistance circuits.
  • Power take-offs and multidisc clutches operating in oil.
  • Hydrostatic steering systems.

 

Performance:

Specifications - ACEA E3

Manufacturers Approvals: MASSEY-FERGUSON - CMS M 1145 / 1144, ZF - TE-ML 06B / 07B

Meets Manufacturers Specifications:

   - Multipurpose applications:

  • FORD M2C 159B3
  • MASSEY FERGUSON CMS M1139
  • JOHN DEERE JDM J27

   - Engine applications:

  • ACEA E3
  • API CG-4/SF

   - Tractor transmission applications:

  • CASE MS 1206, 1207
  • JOHN DEERE JDM J20A, J20C
  • FORD M2C86A, M2C134C, M2C134D, FNHA 2 C 201.00
  • MASSEY FERGUSON CMS M1127A, M1135

   - Mechanical transmission applications:

  • API GL4

   - Automatic transmission applications:

  • CATERPILLAR T02
  • GM ALLISON C4

 

Advantages:

  • Can be used in most old or new mechanical components of agricultural machinery.
  • Simplifies lubricant supply and storage. Eliminates errors of use. Completely miscible with conventional oils or those of the same category or of a lower level.
  • Its SAE 10W viscosity makes it fluid when cold, permitting easy engine starts at low temperature, and immediate efficiency of hydraulic filters guaranteeing shorter response time for hydraulic drive systems.
  • SAE 40 viscosity grade when hot for engines (equivalent to SAE 90 for transmissions), ensuring a continuous oil film between moving parts and operating safety at all temperatures.
  • Outstanding anti-wear capability ensuring a long life for the engine, transmission systems and hydraulic circuit components.
  • Anticorrosion and antirust properties to protect the non-ferrous metals and alloys in mechanical components.
  • Excellent anti-foaming qualities, to prevent any sump overflow as well as pump depriming or cavitation.
  • Completely inert to seals.
  • The use of specially refined base oils gives high resistance to oxidation, preventing the formation of deposits and glaze on parts operating at high temperature.
  • Special frictional characteristics ensuring progressive, efficient and silent operation of brake and clutch systems.
  • Reduces fuel & oil consumption in engines thanks to the use of selected base oils.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total MEP SUTO 15W-30 - Multipurpose Oil (Agriculture) - 152648

Total MEP SUTO 15W-30 - Multipurpose Oil (Agriculture) - 152648

 

Multigrade 15W-30 Super Universal Tractor Oil.

 

Applications:

  • A multipurpose oil used for agricultural machinery, simplifying maintenance.
  • Ideal for naturally aspirated and turbocharged diesel engines.
  • Suitable for transmissions, hydraulics and wet brakes.

 

Specifications:

  • API CD/SE
  • API GL4
  • MF M 1135 /JD J20A
  • MF M 1139 / FORD M2C 159B

 

Advantages:

  • High viscosity index with good stability in operation.
  • Can be recommended for tractors and combine harvesters of all makes.
  • For use in all seasons.

 

Pack sizes available - 205L drums

Discover More +
Total Dynatrans FR 80w-85 - Lubricant - 154212

Total Dynatrans FR 80w-85 - Lubricant - 154212

 

Lubricant for transmissions equipped with wet disk brakes and hydraulic systems for public works and handling equipment.

 

Applications:

  • Lubrication of mechanical transmissions requiring a level GL4 product with SAE 80W viscosity.
  • Lubrication of hydraulic lift, servo, transmission and steering systems.
  • Lubrication of power takeoffs.
  • Lubrication of driving axles equipped with wet brakes.

 

Performance:

Classifications - API : GL-4

Meets manufacturers specifications - RENAULT AGRICULTURE : 180596-88.3, MASSEY FERGUSON : CMS M 1141 / 1135, NEW HOLLAND : NH 420 A, FORD : M2C 86B / 86C.

Suitable for transmission systems - Some devices by FIAT, JCB, KOMATSU, MANITOU …

 

Advantages:

  • Suitable for a wide range of agricultural machinery and public works equipment. Simplifies maintenance management.
  • Used in heavy work conditions or in the case of vibration phenomena during braking.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dynatrans MPV - Lubricant - 154240

Total Dynatrans MPV - Lubricant - 154240

 

Lubricant for wet disk brake transmissions and hydraulic systems for agricultural tractors and public works or handling equipment.

 

Applications:

  • Lubrication of transmissions requiring a GL-4, 10W-30 or 80W level product.
  • Lubrication of automatic transmissions, torque converters and hydrostatic transmissions.
  • Used in hydraulic systems and power-assisted steering.
  • Lubrication of power takeoffs with wet clutches.
  • Cooling of oil bath disk brakes.

 

Performance:

Classifications - API : GL-4

Manufacturers Approvals - MASSEY FERGUSON : CMS M 1145 / 1143, VOLVO CE : WB 101, ZF : TE-ML 03E / 05F / 06K / 17E

Meets Manufacturers Specifications - MASSEY FERGUSON : CMS M 1141 / 1135, JOHN DEERE : JDM J 20C, CNH : MAT 3505 / 3525 / 3526, CASE : MS 1206 / 1207 / 1209, NEW HOLLAND : NH 410B / NH 410C, FORD : M2C 134D / FHNA 2C 201.00, KUBOTA : UDT, Mc CORMICK : HTX, AGCO/Allis : 821 XL, CLAAS / RENAULT AGRICULTURE

Suitable for transmission systems of: Tractors - DEUTZ, FENDT, VALTRA, LANDINI, SAME… and machines - CATERPILLAR, JCB, KOMATSU…when an UTTO fluid is required.

 

Advantages:

  • Suitable for a wide range of agricultural and Public Works equipment thus allowing the stock of lubricants to be reduced.
  • Excellent low temperature performance (protects friction brakes against sticking) and high temperature performance (protects against judder or slip).
  • Very good extreme pressure and antiwear properties giving optimum protection of gears and hydraulic components.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Dynatrans AC 30 - Lubricant - 154843

Total Dynatrans AC 30 - Lubricant - 154843

 

Lubricants for hydraulic systems and transmission components (axles or gearboxes) equipped with specific brake friction discs.

 

Applications:

Hydraulic system, powershift gearbox, axle and final drives for which the manufacturer recommends a fluid meeting one of the hereunder mentioned specifications.
For CATERPILLAR equipment and between -10°C and +40°C:

  • Grade SAE 10W is used in hydraulic systems
  • Grade SAE 30 is used in powershift gearboxes
  • Grade SAE 50 is used in axles and final drives

 

Performance:

Manufacturers Approvals - ALLISON : C4 - N° 33132010 (SAE 10W), C4 - N° 33122010 (SAE 30)

Meets manufacturers specifications - CATERPILLAR : TO-4, KOMATSU : MICRO-CLUTCH

Suitable for transmission systems - DANA, EATON FULLER, KOMATSU, ROCKWELL...

 

Advantages:

  • Excellent antiwear and anticorrosion properties
  • Good performance with respect to seals
  • Antifoam
  • Friction properties adapted to the types of equipment referenced

 

Pack sizes available - 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Dynatrans AC 10W - Lubricant - 154934

Total Dynatrans AC 10W - Lubricant - 154934

 

Lubricants for hydraulic systems and transmission components (axles or gearboxes) equipped with specific brake friction discs.

 

Applications:

Hydraulic system, powershift gearbox, axle and final drives for which the manufacturer recommends a fluid meeting one of the hereunder mentioned specifications.
For CATERPILLAR equipment and between -10°C and +40°C:

  • Grade SAE 10W is used in hydraulic systems
  • Grade SAE 30 is used in powershift gearboxes
  • Grade SAE 50 is used in axles and final drives

 

Performance:

Manufacturers Approvals - ALLISON : C4 - N° 33132010 (SAE 10W), C4 - N° 33122010 (SAE 30)

Meets manufacturers specifications - CATERPILLAR : TO-4, KOMATSU : MICRO-CLUTCH

Suitable for transmission systems - DANA, EATON FULLER, KOMATSU, ROCKWELL...

 

Advantages:

  • Excellent antiwear and anticorrosion properties
  • Good performance with respect to seals
  • Antifoam
  • Friction properties adapted to the types of equipment referenced

 

Pack sizes available - 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Dynatrans AC 50 - Lubricant - 154937

Total Dynatrans AC 50 - Lubricant - 154937

 

Lubricants for hydraulic systems and transmission components (axles or gearboxes) equipped with specific brake friction discs.

 

Applications:

Hydraulic system, powershift gearbox, axle and final drives for which the manufacturer recommends a fluid meeting one of the hereunder mentioned specifications.
For CATERPILLAR equipment and between -10°C and +40°C:

  • Grade SAE 10W is used in hydraulic systems
  • Grade SAE 30 is used in powershift gearboxes
  • Grade SAE 50 is used in axles and final drives

 

Performance:

Manufacturers Approvals - ALLISON : C4 - N° 33132010 (SAE 10W), C4 - N° 33122010 (SAE 30)

Meets manufacturers specifications - CATERPILLAR : TO-4, KOMATSU : MICRO-CLUTCH

Suitable for transmission systems - DANA, EATON FULLER, KOMATSU, ROCKWELL...

 

Advantages:

  • Excellent antiwear and anticorrosion properties
  • Good performance with respect to seals
  • Antifoam
  • Friction properties adapted to the types of equipment referenced

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Dynatrans LS 20w40 - Lubricant - 154940

Total Dynatrans LS 20w40 - Lubricant - 154940

 

Lubricant for axles equipped with limited slip differentials or wet disk brake systems for Public Works and handling equipment.

 

Applications:

  • Lubrication of axles subject to high temperature constraints generated by the simultaneous installation and operation of limited slip differentials and wet disk brake systems in the same oil bath.
  • Can be used in the transmission and in hydraulic systems subject to high temperatures.

 

Performance:

Classifications - API : GL-4

Manufacturers Approvals - ZF : TE-ML 05F / 06K / 17E

Meets Manufacturers requirements - CASE : MS 1317, HANOMAG, HITACHI, KOMATSU…

 

Advantages:

  • Guarantees the high cleanliness of the limited slip disks installed in the axle
  • Reduces noise under intensive use
  • Provides optimum protection for gears and friction components
  • Excellent performance with respect to seals
  • Foam free

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dynatrans DA 80W-90 - Lubricant - 154941

Total Dynatrans DA 80W-90 - Lubricant - 154941

 

Lubricant for axles equipped with limited slip disc self-locking differential systems.

 

Applications:

  • Lubrication of axles equipped with limited slip self-locking differential systems for worksite equipment and agricultural machinery and also for 4 wheel drive passenger cars.
  • May also be used in traditional hypoid axles not equipped with limited slip axles.

 

Performance:

Classifications - API : GL-5-LS, MIL.L. : 2105D

Manufacturers Approvals - ZF : TE-ML 05C / 12C / 21C

Meets Manufacturers Specifications:

  • Worksite equipment: LIEBHERR, TEREX, VOLVO, CASE, JCB …
  • Agricultural tractors: CLAAS-RENAULT, DEUTZ, FORD M2C 104A, STEYR…
  • 4 Wheel Drive passengers cars and all roads vehicles

 

Advantages:

  • Guarantees the high cleanliness of the limited slip discs installed in the axle.
  • Prevents noise and vibration under intensive use.
  • Thanks to its specific Extreme Pressure additives, it provides maximum protection of very highly loaded gears and gears subject to shocks.
  • Excellent compatibility with the disk friction materials.
  • Excellent performance with respect to seals.

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Dynatrans CVT 10w30 - Agriculture - 156313

Total Dynatrans CVT 10w30 - Agriculture - 156313

 

Specific lubricant for CVT transmissions equipping agricultural tractors.

 

Applications:

  • Lubrication of "Continuously Variable Transmissions" installed on agricultural tractors and some worksite equipment.
  • Can be used in traditional transmissions.
  • Also suitable for all gearboxes and power takeoffs.
  • Can be used in wet clutch transmissions including those equipped with oil bath disk brakes.
  • Used in hydraulic systems and hydrostatic steering.

 

Performance:

Classifications - API : GL-4

Manufacturers Approvals - ZF : TE-ML 06F, MASSEY FERGUSON : CMS M 1145

Meets Manufacturers Specifications - CASE : CVX, MASSEY FERGUSON : Dyna VT, STEYR : CVT

Suitable for CVT transmission systems - DEUTZ TTV, JCB, JOHN DEERE Autopowr, NEW HOLLAND TVT…

   

 

Advantages:   

  • Multiple applications thus allowing transmission lubricants to be rationalised.
  • Performance specifications adapted to CVT systems and guarantee smooth and progressive transmission operation.
  • Very high antiwear performance for long transmission component life.

 

Pack sizes available - 20L

Discover More +
Total Fluide XLD FE - Extra Long Drain Automatic Transmission Fluid - 163822

Total Fluide XLD FE - Extra Long Drain Automatic Transmission Fluid - 163822

 

There are two different versions of this product; one is for passenger cars and the other for trucks.

 

Applications:

Cars:

  • New generation automatic transmission fluid based on an advanced synthetic technology allowing extra long drain and very high performance needed for the demanding requirements of passenger cars.
  • Suitable for all applications requiring a GM Dexron III-H or FORD Mercon® / Mercon® V (before 2007) level.
  • Can be used in Asian step-automatic transmissions requiring strong antishudder durability and extended drain intervals, including following OEMS : Nissan (Matic D, J, K), Mazda (M-III, M-V), Honda (Z-1), Toyota (T-IV, JWS3309), Hyundai, Kia, Mitsubishi (SP-II / SP-III, Mazda (M-III, M-V).
  • Is suitable for all applications requiring the following levels of performance Allison TES 295 and ZF 14 C.

 

Trucks:

- New generation automatic transmission fluid based on an advanced synthetic technology allowing extra long drain and very high performance needed for the demanding requirements of modern heavy duty automatic gearboxes.
- Is particularly recommended for use on heavy duty automatic transmissions (found on buses, refuse trucks, utility vehicles etc.) manufactured by Voith, Allison and ZF requiring maximal drain intervals.
- Can be used in :

  • Asian step-automatic transmissions requiring strong antishudder durability, including following OEMS: Nissan (Matic D, J, K), Mazda (M-III, M-V), Honda (Z-1), Toyota (T-IV, JWS3309), Hyundai, Kia, Mitsubishi (SP-II / SP-III).
  • For the lubrication of materials used in Public Works or Quarries.

- Is suitable for all applications requiring the following levels of performance Allison TES 295 and ZF 14 C.

 

Specifications:

Cars:

Meets the requirements of :

  • GM Dexron® III-H
  • FORD Mercon® / Mercon® V
  • JASO 1A
  • NISSAN (Matic D,J,K)
  • JWS 3309
  • MAZDA (M-III,M-V)
  • HONDA (Z-1), TOYOTA (T-IV), Hyundai, Kia, Mitsubishi (SP-II / SP-III)
  • MB-Approval 236.11
  • BMW (applications when are required LT 71141 or LA2634 fluids)
  • VW (TL 52162)
  • ZF TE ML, 09,11B
  • CHRYSLER ATF +3 / +4

 

Trucks:

Homologated :

  • ZF TE-ML 04D, 09, 14B , 16L & 17C,
  • ALLISON C-4 – n° 32802009,
  • MAN 339 Typ V2 & Z-2
  • Volvo 97341
  • VOITH H55.6336,
  • MB-Approval 236.6

Pending homologations:

  • Allison TES 389

Meets the performance requirements of the following specifications:

  • Allison TES 295
  • MB-Approval 236.91
  • ZF 14C, 02F, 11B
  • MAN 339 Z-3
  • Dexron® III-H , Mercon® / Mercon® V

 

Advantages:

Cars:

  • Outstanding oxidation and thermal stability resulting in lower deposit and harmful acidic by-product formation, for a maximal drain interval capability.
  • Very stable viscosity profile, even under very severe constrains of shear, to ensure adequate lubrication all over time.
  • Excellent filterability allowing the reduction of filter change intervals, thus reducing operating costs.
  • Great foaming resistance for optimal lubrication condition and hydraulic efficiciency.
  • Superior friction stability, to maintain and excellent shifting quality over a very long time.
  • Very good protection against corrosion.
  • Improved anti-wear technology compared to previous ATF technologies.
  • Very good seal compatibility preventing oil leakages.
  • Enhanced friction modifiers improving driver comfort with smooth, efficient and no-shudder shifting.

 

Trucks:

  • Outstanding oxidation and thermal stability resulting in lower deposit and harmful acidic by-product formation, for a maximal drain interval capability.
  • Very stable viscosity profile, even under very severe constrains of shear, to ensure adequate lubrication all over time.
  • Excellent filterability allowing the reduction of filter change intervals, thus reducing operating costs.
  • Great foaming resistance for optimal lubrication condition and hydraulic efficiency.
  • Very good protection against corrosion.
  • Superior friction stability
Discover More +
Castrol Transmax Offroad 10 - Powershift Transmission Fluid - 1716

Castrol Transmax Offroad 10 - Powershift Transmission Fluid - 1716

 

Description

Castrol Transmax Offroad 10 is a transmission lubricant using highly refined mineral oil, designed for use in powershift transmissions, direct drive transmissions, wet disc brakes, final drives and differentials in off road machinery where Caterpillar TO-4 is required. It is approved against ZF TE ML 03C and recommended for use in Komatsu off road machinery drivetrain and hydraulics.

 

Advantages

  • Good oxidation stability maintains high temperature performance and transmission cleanliness during service life.
  • Stable friction characteristics eliminate slippage and reduce brake noise.
  • Excellent friction performance with a wide range of friction materials ensures smooth positive changes and enhanced friction material durability.
  • Improved wear performance extends component life.

 

Product Performance Claims

  • CAT TO-4
  • ZF TE-ML TE-ML 03C
  • Recommended for Komatsu Equipment
Discover More +
Castrol Transmax Offroad 30 - Powershift Transmission Fluid - 1718

Castrol Transmax Offroad 30 - Powershift Transmission Fluid - 1718

 

Description

Castrol Transmax Offroad 30 is a transmission lubricant using highly refined mineral oil, designed for use in powershift transmissions, direct drive transmissions, wet disc brakes, final drives and differentials in off road machinery where Caterpillar TO-4 is required. Selected grades are approved for use in Allison C4 applications and Komatsu off road
machinery drivetrain and hydraulics.

 

Advantages

  • Excellent oxidation stability maintains high temperature performance and transmission cleanliness during service life.
  • Stable friction characteristics eliminate slippage and reduce brake noise.
  • Excellent friction performance with a wide range of friction materials ensures smooth positive changes and enhanced friction material durability.
  • Improved wear performance extends component life.

 

Product Performance Claims

  • CAT TO-4
  • ZF TE-ML 03C, 07F
  • Recommended for Komatsu Equipment
Discover More +
Castrol Transmax Offroad 50 - Powershift Transmission Fluid - 1719

Castrol Transmax Offroad 50 - Powershift Transmission Fluid - 1719

 

Description

Castrol Transmax Offroad 50 is a transmission lubricant using highly refined mineral oil, designed for use in powershift transmissions, direct drive transmissions, wet disc brakes, final drives and differentials in off road machinery where Caterpillar TO-4 is required, and recommended for use in Komatsu off-road machinery drivetrain and hydraulics.

 

Advantages

  • Excellent oxidation stability maintains high temperature performance and transmission cleanliness during service life.
  • Stable friction characteristics eliminate slippage and reduce brake noise.
  • Excellent friction performance with a wide range of friction materials ensures smooth positive changes and enhanced friction material durability.
  • Improved wear performance extends component life.

 

Product Performance Claims

  • Cat TO-4
  • Sutiable for Komatsu
Discover More +
Castrol ATF Dex II Multivehicle - Automatic Transmission Fluid - 1802

Castrol ATF Dex II Multivehicle - Automatic Transmission Fluid - 1802

 

Castrol ATF Dex II Multivehicle is an Automatic Transmission Fluid which may be used in automatic transmissions and power steering units of many types of vehicle where Dexron IID or Mercon performance is required. It is also approved for use in many european heavy duty automatic transmissions and Mercedes Benz manual transmissions.

Available in: 12x1L, 4x5L, 20L, 208L Drum, Bulk

 

  • Multiple approvals provide wide ranging use.
  • Ensures efficient operation of power steering units under all conditions.
  • High thermal stability protects against deposits and oil thickening prolonging the life of components and lubricant.
  • Enhanced friction characteristics and wear protection maintain effective operation of equipment.
  • Effective seal compatibility reduces the risk of leakages

 

Product Performance Claims:
MAN 339 Z1, V1
MB-Approval 236.6
Voith H55.6335.xx
Meets Ford Mercon
GM Dexron IID
ZF TE-ML 03D, 04D, 11A, 14A, 17C

Discover More +
Castrol Syntrax Universal Plus 75W-90 - Universal Fluid for manual transmissions

Castrol Syntrax Universal Plus 75W-90 - Universal Fluid for manual transmissions and axles - 1815

 

DESCRIPTION

Castrol Syntrax Universal Plus 75W-90 is a full synthetic multipurpose manual transmission and final drive lubricant. It may be used in synchronised manual transmissions and final drives/differentials of a wide range of vehicles (commercial vehicle, construction equipment, passenger cars) where API GL-4 or API GL-5 fluids are required and it carries a number of approvals.

 

ADVANTAGES

  • A single product for transmissions and final drives reducing inventory and the potential for misapplication
  • Excellent low temperature fluidity provides improved shift quality and wear protection in cold conditions and improves fuel efficiency.
  • Superior high temperature stability and excellent wear protection even in the most arduous conditions prolongs equipment life and allows for extended drain intervals.
  • Full compatibility with conventional mineral oils and seals allows this product to be used in a wide range of applications.

 

PRODUCT PERFORMANCE CLAIMS

  • API GL-4/ GL-5/ MT-1
  • SAE J2360
  • MAN M 3343 S, MAN 341 E3
  • MB-Approval 235.8
  • Scania STO 1:0
  • ZF TE-ML 02B, 05B, 12B, 16F, 17B, 19C, 21B
  • Eaton Transmissions (Europe) approved for 300.000 km drain
Discover More +
Castrol Syntrans Transaxle 75W-90 - Manual Transmission Fluid - 1818

Castrol Syntrans Transaxle 75W-90 - Manual Transmission Fluid - 1818

 

DESCRIPTION

Castrol Syntrans Transaxle 75W-90* is a full synthetic gear oil designed to provide enhanced EP performance compared with a conventional GL-4 fluid in combination with synchroniser compatibility; it is approved against VW 501.50 and is suitable for use in transaxles, manual gearboxes, transfer boxes and final drives where an API GL-4 lubricant is specified.
(*SAE class according to SAE J306 pre 2005)

 

ADVANTAGES

  • Excellent anti wear/EP and synchroniser performance makes it ideal for use in transaxles.
  • Better protection leads to longer transmission life and performance.
  • Excellent shift quality especially at low temperatures improves driver comfort.
  • Low temperature fluidity improves wear protection at start up and offers the potential for fuel savings.
  • Temperature reduction in operation extends oil and component life and aids fuel efficiency/ emissions reduction.
  • Very good high temperature stability gives excellent transmission cleanliness prolonging the life of lubricant and Transmission

 

PRODUCT PERFORMANCE CLAIMS:

  • API GL-4+
  • VW 501.50
Discover More +
Castrol ATF Multivehicle - Automatic Transmission Fluid - 1723

Castrol ATF Multivehicle - Automatic Transmission Fluid - 1723

 

 

Description

Castrol ATF Multivehicle is an automatic transmission fluid for use in most Japanese passenger cars which typically have higher anti-shudder performance requirements than European or US designed automatic transmissions. It was designed to meet the Japanese Automobile Standards Organisation performance needs (JASO 1A) which is recognised by most Japanese Automobile Manufacturers.

 

Advantages

Castrol ATF Multivehicle is based on latest high performance additive technology in high quality base stocks to ensure:
Exceptional high temperature protection to effectively resist fluid oxidation (excellent viscosity stability)
Enhanced friction durability for smooth transmission performance to control transmission shudder
Superb low temperature fluidity for cold weather shifting

 

Product Performance Claims:

  • JASO 1A

Suitable for use where one of the following specifications is needed:

  • Aisin Warner JWS 3309
  • Toyota Type T, T-II, T-III, T-IV
  • Jatco Automatic Transmission
  • Nissan Matic Fluid C, D, J
  • Mitsubishi Diamond SP-II, SP-III
  • Suzuki ATF Oil and ATF Oil Special
  • Mazda ATF D-III and ATF M-3
  • Daihatsu Alumix ATF Multi
  • Honda ATF Z-1 (not for CVT-transmissions)
  • Subaru ATF
  • Hyundai
  • Kia
  • GM
  • Daewoo
Discover More +
Castrol Transmax Dex III Multivehicle - Automatic Transmission Fluid - 1713

Castrol Transmax Dex III Multivehicle - Automatic Transmission Fluid - 1713

 

Automatic Transmission Fluid

 

Description

Castrol Transmax Dex III Multivehicle is designed for use in GM automatic transmissions pre 2005 and Ford automatic transmissions built between 1983 and 1996 where Dexron® (II or III) or Mercon are required. This product is approved for use in Allison heavy duty transmissions against TES 389. It is also approved for use in a wide range of european heavy duty automatic transmissions. It may be used in some power steering units. NB: Do not use where MERCON® V, MERCON® SP or DEXRON® VI is required.

 

Advantages

  • Multiple manufacturer approvals make it suitable for wide ranging use.
  • It is specifically formulated for high thermal stability and resistance to oxidation which protects against the formation of deposits and oil thickening prolonging the life of components and lubricant.
  • Optimised friction characteristics provide smooth shifting and efficient power transfer.
  • High viscosity index provides a stable viscosity over a wide temperature range for effective protection of transmissions and operation of power steering units

 

Product Performance Claims

  • Allison C4
  • Allison TES 389
  • Ford Mercon
  • GM Dexron IIIH
  • MAN 339 Z1, V1
  • MB-Approval 236.9
  • Voith H55.6335.xx
  • Volvo 97340
  • Volvo 97341
  • ZF TE-ML 04D, 14A, 17C
Discover More +
Castrol TranSynd - Fully Synthetic Automatic Transmission Fluid - 1714

Castrol TranSynd - Fully Synthetic Automatic Transmission Fluid - 1714

 

Applications
Castrol TranSynd can be recommended for all vehicles calling for Dexron III/Mercon or Allison C4 ATF's including bus and refuse vehicles with automatic transmissions.

 

Features / Benefits

  • Excellent thermal and oxidative stability means that the viscosity remains almost constant helping prevent deposits and oil thickening - this extends transmission life and avoids incorrect gear changing.
  • Excellent transmission cleanliness under all conditions permits extended oil drain and decreased servicing.
  • Excellent temperature reduction through reduced friction leads to longer oil and component life and permits extended drain and decreased servicing. Lower power input means fuel savings potential and reduced emissions.
  • Optimised frictional characteristics gives smoother gear changing at all ambient temperatures and load conditions. Constant frictional properties improve driving comfort.
  • Outstanding cold flow properties enables faster oil flow to all critical components (eg torque converter, friction plates, planetary wheels and brake bands) particularly during cold starts. More responsive and comfortable gear change.
  • Minimises 'shift stock' when changing gear.
  • Excellent shear stability properties helps retain full transmission performance over whole oil drain period.
  • Optimal lubrication ensures constant level of comfort during gear changing.
  • Good extreme pressure (EP) and anti-wear performance gives better transmission component protection leading to longer life.
  • Very good seal performance helps avoid oil leakages, reducing repair costs.
  • Free from chlorine and heavy metals for better environmental compatibility - easier waste oil disposal and recyclability.

 

Specifications / Performance

  • ZF TE ML-14 (extended drain, 120,000 km)
  • Allison C4 (C4-27403598 )
  • Allison TES 295
Discover More +
Castrol Syntrans Z Longlife 75W-80 - Manual Transmission Fluid - 1819

Castrol Syntrans Z Longlife 75W-80 - Manual Transmission Fluid - 1819

 

DESCRIPTION

Castrol Syntrans Z Long Life 75W-80 is a full synthetic SAE 75W-80 fluid developed specifically to meet ZF extended drain intervals requirements (500.000 km) and is approved for use in all ZF commercial manual and automated manual transmissions. It can be recommended in other manual transmissions requiring API GL-4 and is particularly suitable for severe applications where loads and temperatures are higher

 

ADVANTAGES

  • Excellent frictional characteristics with carbon, sinter bronze and molybdenum synchronisers provides improved shift quality and extends component life.
  • Temperature reduction in operation extends the life of the oil and components aiding extended drain intervals and reducing downtime and repair costs.
  • Provides excellent low temperature fluidity giving improved protection and smooth gear shifts at low temperatures.
  • Excellent thermal and oxidative stability extends the life of transmission and lubricant extending drain intervals and reducing service needs.
  • Excellent wear and EP performance provides protection to components under high loads extending component life and reducing maintenance costs.

 

PRODUCT PERFORMANCE CLAIMS

  • API GL-4
  • MAN 341 Z5
  • ZF TE-ML 01E, 02E, 16P
Discover More +
Castrol Syntrax Longlife 75W-90 - Axle fluid (Multivehicle) - 1820

Castrol Syntrax Longlife 75W-90 - Axle fluid (Multivehicle) - 1820

 

Castrol Syntrax™ Longlife 75W-90 is a full synthetic multigrade final drive lubricant. It is Castrol’s prime recommendation for final drives in heavy commercial vehicles, and is approved by MAN, Scania and ZF. Specially designed and approved by BMW for use in all BMW final drives fitted with conventional (non limited slip) differentials.

 

Applications

Castrol Syntrax Longlife 75W-90 is Castrol’s prime recommendation for final drives in heavy commercial vehicles, and is approved by MAN, Scania and ZF. Specially designed and approved by BMW for use in all BMW final drives fitted with conventional (non limited slip) differentials.

 

Specifications

  • API GL-5

OEM Approvals:

  • MAN 342 Typ S1
  • Scania STO 1:0
  • ZF TE-ML TE-ML 05B, TE-ML 12B, TE-ML 17B, TE-ML 19C, TE-ML 21B
  • BMW (Non LS Rear Axles)

 

Advantages

  • Fuel savings and reduced emissions due to balanced viscometric and frictional characteristics.
  • Superior low temperature fluidity pumpability helps ensure optimum protection at start up under all conditions.
  • Excellent thermal and oxidative stability provides final drive and differential cleanliness which permits extended drain and decreased servicing.
  • Optimal anti-wear, extreme pressure performance at all ambient temperatures and load conditions.
  • Excellent temperature reduction and shear stability enhance final drive performance and helping extend component life.
Discover More +
Castrol Syntrax Limited Slip 75W-140 - Axle Fluid for Limited Slip Differentials

Castrol Syntrax Limited Slip 75W-140 - Axle Fluid for Limited Slip Differentials - 1821

 

DESCRIPTION

Castrol Syntrax Limited Slip 75W-140 is a full synthetic hypoid gear oil formulated for use in both conventional and limited slip differentials. It has demonstrated outstanding performance in competition vehicles employing limited slip differentials. It is approved for use in the high performance BMW-M Series and Mercedes Benz AMG limited slip differentials.

 

ADVANTAGES

  • Reduces noise and vibrations in the axle.
  • Excellent shear stability maintaining performance over the life of the lubricant.
  • Exceptional stability at high temperatures extending the life of lubricant and axle.
  • Effective wear resistance ensures protection under high loads and prevents damage to components.
  • Very good low temperature fluidity properties increases protection at start up.

 

PRODUCT PERFORMANCE CLAIMS:

  • API GL-5
  • MB-Approval 235.61
  • ZF TE-ML 05D, 12D, 16G, 21D
  • BMW LS Rear Axles
  • Recommended for Nissan GTR limited slip axles

 

Pack sizes available - 12x1ltr, 20ltr

Discover More +
Castrol TranSynd RD - Automatic Transmission Fluid for Heavy Duty Applications -

Castrol TranSynd RD - Automatic Transmission Fluid for Heavy Duty Applications - 1822

 

TranSynd™ RD is a premium, synthetic, universal powershift and automatic transmission fluid engineered to remain stable under the most severe conditions. TranSynd™ RD was introduced by Allison Transmission for “Rigorous Duty” applications where extended drain intervals and reduced life cycle costs are desired in Allison 5000, 6000, 8000 and 9,000 Off-Highway Series transmissions.

 

 

  • Excellent thermal and oxidation stability resists deposit formation
  • High viscosity index synthetic base fluids provide superior high/low temperature performance
  • Excellent shear stability, excellent corrosion and anti-foaming characteristics
  • Excellent wear protection
  • Allows extended drain intervals and extended filter change intervals
  • One fluid for year-round use in all geographic locations, reduces used oil disposal costs

 

Pack sizes available - 208ltr, 1000ltr IBC

Discover More +
Castrol Syntrax Universal 80W-90 - Universal fluid for manual transmissions and

Castrol Syntrax Universal 80W-90 - Universal fluid for manual transmissions and axles - 1823

 

Castrol Syntrax Universal 80W-90 is a part-synthetic SAE 80W-90 multipurpose manual transmission and final drive lubricant. It is particularly recommended for use in highly loaded final drives and differentials of commercial vehicles where API GL-5 performance is required and it carries a number of approvals. Additionally it may be used in synchronised manual transmissions requiring API GL-4 or GL-5 fluids.

 

Advantages:

  • A single product for transmissions and final drives reducing inventory and the potential for misapplication
  • High temperature stability gives superior performance and extended drain potential.
  • Proven performance as a problem solver in differentials operating in hot climates under arduous conditions.
  • Optimised synchroniser performance gives smooth gear shifting at all temperatures.
  • High shear stability maintains performance over the life of the lubricant.
  • Excellent wear protection particularly at high temperatures extends component life and reduces maintenance costs

 

Product Performance Claims:

  • API GL-4/GL-5
  • MAN 341 Typ E2 M 3343 Typ M
  • MB-Approval 235.0
  • Scania STO 1:0
  • ZF - TE-ML 02B
  • ZF - TE-ML 05A
  • ZF - TE-ML 12E
  • ZF - TE-ML 16C
  • ZF - TE-ML 17B
  • ZF - TE-ML 19B
  • ZF - TE-ML 21A

 

Pack sizes available - 20ltr, 208ltr, bulk delivery

Discover More +
Castrol Universal 75W-90 - Universal Fluid for manual transmissions and axles -

Castrol Universal 75W-90 - Universal Fluid for manual transmissions and axles - 1827

 

Castrol Universal 75W-90 is a multipurpose gear lubricant for use in both synchronised manual transmissions and final drives and differentials where either API GL-4 or API GL-5 are specified.

 

Advantages:

  • A single product for transmissions and final drives reducing inventory and the potential for misapplication
  • High temperature stability gives superior performance and extended drain potential.
  • Optimised synchroniser performance gives smooth gear shifting at all temperatures.
  • Excellent wear protection extends component life and reduces maintenance costs

 

Pack sizes available - 12x1ltr, 20ltr, 208ltr drums

Discover More +
Total Dynatrans VX FE - High performance lubricant - 183630

Total Dynatrans VX FE - High performance lubricant - 183630

 

High performance lubricant, based on « synthese technology », dedicated for Earth Moving machinery axles and agricultural tractors transmissions.

 

Applications:

  • Lubrication of Construction or Public Works machinery axles when an API GL-4 UTTO fluid is required.
  • Cooling of the oil immersed brake discs.
  • Numerous suitable applications in agricultural tractor transmissions.

 

Performance:

Classification - API : GL-4

Meets Manufacturers Specifications - VOLVO CE : WB 102, JOHN DEERE : JDM J 20D, KUBOTA : S UDT

Suitable when the following specifications are recommended: MASSEY FERGUSON : CMS M 1143 / 1145, AGCO/Allis : 821 XL, CNH : MAT 3505 / 3525 / 3526, CASE : MS 1206 / 1207 / 1209, NEW HOLLAND : NH 410B / NH 410C, FORD : M2C 134D / FNHA 2C 201.00, VALTRA : G2-08, Mc CORMICK : HTX, KOMATSU : AXO 80, CLAAS / RENAULT AGRICULTURE

 

Advantages:

  • Suitable to a wide range of Public Works and Agricultural machinery providing a reduction of the used lubricant number.
  • Permits to reduce the friction or bath energy losses generating a fuel economy.
  • Excellent behaviour at low temperature : protection of friction discs against sticking risks and also at high temperature : protection against “stick and slip” risks, responsible of noise.
  • Very good load capacity providing a reinforced gear protection and then an extended lifetime of transmission and hydraulic components.
  • Improved durability of the lubricant, due to its non-conventional base oil nature.

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Castrol Hypoy LS 85W140 - Automotive Limited Slip Gear Oil - 1846

Castrol Hypoy LS 85W140 - Automotive Limited Slip Gear Oil - 1846

 

Castrol Hypoy LS is a mineral oil based SAE 85W-140 extreme pressure gear lubricant designed to cope with the special friction characteristics of limited slip differentials and associated hypoid gears.

 

Application

Castrol Hypoy LS has been particularly developed for use in limited slip rear axles fitted to high performance cars.

 

Hypoy LS can be used where the following performance standards are specified:

  • API Service GL5

 

Pack sizes available - 208ltr drums

Discover More +
Castrol Syntrans 75W-85 - Manual Transmission Fluid - 1866

Castrol Syntrans 75W-85 - Manual Transmission Fluid - 1866

 

Castrol Syntrans 75W-85 is a full synthetic transmission fluid recommended for most commercial vehicle manual transmissions (truck, bus, light commercial vehicle) where API GL-4 lubricants are required. These transmissions are generally larger and subjected to higher loads and temperatures than those in passenger cars: this product was developed for these particular requirements and is approved by a number of manufacturers.

 

  • Excellent thermal and oxidative stability maintains transmission cleanliness and lubricant performance allowing extended drain capability.
  • Synthetic formulation provides a reduction in operating temperatures giving longer component and lubricant life.
  • Superb cold flow characteristics give smoother gear shifts at low temperatures.
  • High shear stability maintains lubricant performance throughout the drain interval.
  • Good wear and EP performance ensures component protection under high load conditions reducing downtime and service costs.

 

Product Performance Claims:
API GL-4
MAN 341 E4
MB-Approval 235.4
Volvo 97307
Eaton 500,000km drain Europe (service bulletin 2273)

 

Pack sizes available - 20ltr

Discover More +
Castrol Syntrans Z 75W-80 - Manual Transmission Fluid - 1871

Castrol Syntrans Z 75W-80 - Manual Transmission Fluid - 1871

 

Castrol Syntrans Z 75W-80 is a Semi-synthetic Transmission Fluid for use in manual transmissions including those equipped with Re-/Intarder, mechanical non-synchronised transmissions, steering systems and supplementary transmissions; it can also be used in cases where the use of higher viscosity single-grade API GL4 fluids can cause shift problems.

 

 

  • Excellent synchroniser performance improves shift quality and improves fuel economy over conventional gear lubricants.
  • Exceptional temperature reduction through reduced friction gives longer oil and component life.
  • Outstanding antiwear performance provides protection to components especially under high load, reducing downtime and repair costs.
  • High shear stability - constant viscosity during oil life enhances performance and life of components.
  • Excellent thermal and oxidative stability gives excellent transmission cleanliness and extended drain capability.

 

Pack sizes available - 208ltr drums

Discover More +
Castrol EPX 85W-140 - Automotive Gear Oils - 1894

Castrol EPX 85W-140 - Automotive Gear Oils - 1894

 

Castrol EPX 85W-140 are extreme pressure multigrade gear oils which are based upon highly refined mineral oils and incorporate extreme pressure additives, corrosion and oxidation inhibitors and anti-foam agents.

 

Application

Developed for the lubrication of spiral bevel and hypoid differentials, they are also suitable for the lubrication of manual transmissions where the manufacturer recommends the use of an oil to API GL5 performance level.

 

Advantages:

  • Load carrying performance to API GL5
  • Provides excellent protection to gears operating under the most severe service conditions
  • Multigrade characteristics give wide operating temperature range
  • Benefits in low temperature performance

 

PERFORMANCE:
API Service Level GL5
ZF TE-ML 01/05/07 (Page 2) Approved

 

Pack sizes available - 20ltr

Discover More +
Castrol Manual EP 80W-90 - Manual Transmission Fluid - 1896

Castrol Manual EP 80W-90 - Manual Transmission Fluid - 1896

 

Castrol Manual EP 80W-90 is a mineral based fluid suitable for use in applications where API GL-4 performance is required. Approved for use in ZF manual transmissions.

 

  • High thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission.
  • Good antiwear and load carrying characteristics extend the life of components.

 

Product Performance Claims:
API GL-4
ZF TE-ML 02B, 16A, 17A, 19A

 

Pack sizes available - 12x1ltr, 20ltr, 208ltr drums

Discover More +
Castrol Manual EP 80W - Manual Transmission Fluid - 1897

Castrol Manual EP 80W - Manual Transmission Fluid - 1897

 

Castrol Manual EP 80W is a mineral based fluid suitable for use in applications where API GL-4 performance is required. Manual EP 80W is approved for use in MB transmissions used in light commercial vehicles and trucks and also approved for use in ZF manual transmissions.

 

Advantages:

  • Wide range of european OEM approvals.
  • High thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission.
  • Good antiwear and load carrying characteristics extend the life of components.

 

Product Performance Claims:
API GL-4
MAN 341 Z1, E1
MB-Approval 235.1
ZF - TE-ML 02B, 17A

 

Pack sizes available - 12x1ltr, 20ltr

Discover More +
Castrol Agri Trans Plus AS - Anti-squawk transmission fluid - 2027

Castrol Agri Trans Plus AS - Anti-squawk transmission fluid - 2027

 

Universal tractor transmission fluid specifically formulated to protect wet brakes from squawk.

 

Advantages:

  • Reduces/eliminates brake chatter
  • Improves brake efficiency
  • Prolongs equipment life
  • Lowers maintenance costs

 

Performance:

API GL-4
M1143, M1141, M1135
Ford M2C 86B, 86C

 

Pack sizes available - 20ltr

Discover More +
Castrol Agri Trans Plus 80W - Universal transmission fluid UTTO - 2035

Castrol Agri Trans Plus 80W - Universal transmission fluid UTTO - 2035

 

Castrol Agri Trans Plus 80W can be used in hydraulic, transmission and PTO of tractors and off-highway equipment. It gives the highest levels of wear prevention from start up and throughout the operative period with enhanced corrosion protection properties.

 

Advantages:

  • Excellent wet clutches and wet brake performance
  • One oil reduces inventory, simplifies serviceing, avoids misapplication and saves money
  • Longer component life reduces downtime and maintenance costs
  • Maintains operating temperature and smoother gear changing
  • Excellent oxidation stability and anti corrosion properties

 

Product Performance Claims:
API GL-4
Meets Ford M2C134D
JDM J20C
MF M1135, M1143, M1145
ZF TE-ML 03E, 05F, 17E, 21F
May be used where Case 1207, 1209, MAT 3505 or MAT 3525 are specified
Volvo transmission oil 97303:023 (WB101)

 

Pack sizes available - 4x5ltr, 20ltr, 208ltr drums, bulk delivery

Discover More +
Castrol Tection Monograde 10W - 2233

Castrol Tection Monograde 10W - Monograde protection for commercial vehicles and equipment - 2233

 

Castrol Tection Monograde is a diesel engine oil available in SAE 10W, 20W, 30, 40 & 50 viscosities.

 

Application

The primary application of Castrol Tection Monograde 10W is in diesel engines, hydraulic systems and transmissions that specify the use of a monograde diesel engine oil.

 

 

User benefits include:

  • Castrol Tection Monograde 10W is formulated to reduce many types of wear and also reduce the build-up deposits, so maintenance costs are controlled and unscheduled downtime is prevented.
  • Can be used in hydraulic and transmission systems that specify use of a monograde engine oil

 

Product Performance Claims:
API CF
MB-Approval 228.0
Can be used for Caterpillar transmissions requiring a TO-2 specification product

 

Pack sizes available - 20ltr, 208ltr drums, bulk

Discover More +
Castrol Tection Monograde 20W - 2234

Castrol Tection Monograde 20W - Monograde protection for commercial vehicles and equipment - 2234

 

Castrol Tection Monograde is a diesel engine oil available in SAE 10W, 20W, 30, 40 & 50 viscosities. Castrol Tection Monograde 20W provides excellent protection in applications where a monograde diesel engine oil is required.

 

Application

The primary application of Castrol Tection Monograde 20W is in diesel engines, hydraulic systems and transmissions that specify the use of a monograde diesel engine oil.

 

 

User benefits include:

  • Castrol Tection Monograde 20W is formulated to reduce many types of wear and also reduce the build-up deposits, so maintenance costs are controlled and unscheduled downtime is prevented.
  • Can be used in hydraulic and transmission systems that specify use of a monograde engine oil

 

Product Performance Claims:
API CF
MB-Approval 228.0

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Castrol Tection Monograde 30 - 2235

Castrol Tection Monograde 30 - Monograde protection for commercial vehicles and equipment - 2235

 

Castrol Tection Monograde is a diesel engine oil available in SAE 10W, 20W, 30, 40 & 50 viscosities. Castrol Tection Monograde 30 provides excellent protection in applications where a monograde diesel engine oil is required.

 

Application

The primary application of Castrol Tection Monograde 30 is in diesel engines, hydraulic systems and transmissions that specify the use of a monograde diesel engine oil.

 

 

User benefits include:

  • Castrol Tection Monograde 30 is formulated to reduce many types of wear and also reduce the build-up of deposits, so maintenance costs are controlled and unscheduled downtime is prevented.
  • Can be used in hydraulic and transmission systems that specify use of a monograde engine oil.

 

Product Performance Claims:
ACEA E1
API CF
MB-Approval 228.0
Can be used for Caterpillar transmissions requiring a TO-2 specification product

 

Pack sizes available - 20ltr, 208ltr drums, bulk

Discover More +
Castrol Tection Monograde 40 - 2236

Castrol Tection Monograde 40 - Monograde protection for commercial vehicles and equipment - 2236

 

Castrol Tection Monograde is a diesel engine oil available in SAE 10W, 20W, 30, 40 & 50 viscosities. Castrol Tection Monograde 40 provides excellent protection in applications where a monograde diesel engine oil is required.

 

Application

Its primary application is in diesel engines, hydraulic systems and transmissions that specify the use of a monograde diesel engine oil.

 

 

User benefits include:

  • Castrol Tection Monograde 40 is formulated to reduce many types of wear and also reduce the build-up deposits, so maintenance costs are controlled and unscheduled downtime is prevented.
  • Can be used in hydraulic and transmission systems that specify use of a monograde engine oil.

 

Product Performance Claims:
ACEA E1
API CF
MB-Approval 228.0
Can be used for Caterpillar transmissions requiring a TO-2 specification product

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Rubia S 10W - Diesel engine lubricant for hydraulic applications - 110786

Total Rubia S 10W - Diesel engine lubricant for hydraulic applications - 110786

 

Applications:

Recommended for hydraulic systems when the manufacturer requires an engine oil with an appropriate grade for these applications.

 

Performance:

Specifications:

  • ACEA E2
  • API CF/SF

OEM's homologations:

  • MAN -  270
  • MIL-L - 2104 E
  • Vickers - 35VQ25
  • ZF - TE-ML 03B

 

Advantages:

  • Monograde
  • High viscosity index
  • High stability in operation
  • Exceptional detergency level
  • Very high dispersancy level
  • Excellent antiwear and anticorrosion properties
  • Excellent antioxydant, antirust and antifoaming properties

 

Pack sizes available - 20ltr, 208ltr, Bulk delivery

Discover More +
Total Rubia S 30 - Monograde lubricant for Diesel engines - 110790

Total Rubia S 30 - Monograde lubricant for Diesel engines - 110790

 

Applications:

  • Suitable for all turbocharged or normally aspirated Diesel engines of civil works machines, trucks, locomotives.
  • Suitable for all Diesel stationary engines (energy production).
  • Also suitable for gear boxes, torque converters when the manufacturer requires an engine oil with an appropriate grade for these applications.

 

 

Performance: 

Specifications:

  • ACEA E2
  • API CF/SF

OEM's Approvals:

  • MERCEDES MB-Approval 228.0
  • MAN 270
  • MIL-L 2104 E

 

Advantages:

  • Monograde
  • High viscosity index
  • High stability in operation
  • Exceptional detergency level
  • Very high dispersancy level
  • Excellent antiwear and anticorrosion properties
  • Excellent antioxydant, antirust and antifoaming properties

 

Pack sizes available - 20ltr, 208ltr drum, 1000ltr IBC, Bulk delivery

Discover More +
Total Transmission TM Multigrade 80W-90 - Gear Oil - 110861

Total Transmission TM Multigrade 80W-90 - Gear Oil - 110861

 

Applications:

  • Oil specially adapted to very stringent requirements; when very high Extreme-Pressure and antiwear levels are aimed in high temperature conditions.
  • Manual gear boxes, transfer boxes, rear axles and differentials when an oil API GL-5 is required.
  • Passenger cars, light commercial, industrial vehicles and trucks.

 

Specifications:

  • API GL-5

 

Advantages:

  • SAE 80W-90 super multigrade: Total Transmission TM Multigrade viscosity is especially low at cold temperatures which leeds to a super SAE 80W (at -26°C its viscosity is 40 000 mPa.s to be compared with 150 000 mPa.s maxi for the 80W grade).
  • Very high viscosity index providing an excellent lubrication and allowing easy gear changes at low temperatures as well as at high temperatures.
  • Very high Extreme-Pressure properties.
  • Exceptional stability in operation.
  • Excellent resistance to oxidation.
  • Excellent antiwear, antifoam, anticorrosion and antirust properties.

 

Pack sizes available - 18x1ltr, 3x5ltr, 20ltr, 208ltr drum, 1000ltr IBC, bulk delivery

Discover More +
Total Transmission TM 85W-140 - Gear Oil - 110867

Total Transmission TM 85W-140 - Gear Oil - 110867

 

Applications:

  • Gear boxes, axles, transfer boxes.
  • Specially recommended for highly loaded hypoid gears.
  • All types of gears when the MIL-L-2105D specification or API GL-5 is required.

 

Specifications:

  • API GL-5

 

Advantages:

  • High viscosity index.
  • High Extreme-Pressure properties.
  • Excellent antifoam, anticorrosive and antirust properties.
  • Excellent stability in operation.

 

Pack sizes available - 3x5ltr, 20ltr, 208ltr drums, bulk delivery

Discover More +
Total Transmission BV 75W-80 - Oil for manual transmissions - 110882

Total Transmission BV 75W-80 - Oil for manual transmissions - 110882

 

Applications:

Total transmission BV is an oil specially designed for the lubrication of manual gear boxes of passenger cars.

 

Specifications:

  • API GL-4+
  • PSA PEUGEOT CITROEN B71 2330

 

Advantages:

  • Fluid multigrade gear oil.
  • High viscosity index which allows a very good lubrication.
  • Improved thermal stability.
  • Excellent fluidity at low temperature ensuring easy cold start and contributing to save energy.
  • High Extreme-Pressure properties.
  • Excellent stability in service.
  • Excellent wear reducing properties, anticorrosion and antirust properties.
  • The gear shifts are easy at cold temperatures as well as high temperatures.
  • Shiftfeel agreement.

 

Pack sizes available - 18x1ltr, 20ltr

Discover More +
Total Transmission SYN FE 75W-90 - High performance synthetic gear oil - 112022

Total Transmission SYN FE 75W-90 - High performance synthetic gear oil - 112022

 

Applications:

  • Very high performance multigrade synthetic oil for the lubrication of highly loaded gears.
  • Designed to meet the challenge of the T.D.L. (Total Drive Line ) concept : a high performance lubrication of hypoid axles as well as synchronized gearboxes.
  • Suitable when filters are part of the lubrication system.
  • Recommended when the levels API GL-4, GL-5, MT-1 or SAE J2360 are specified.
  • Particularly recommended for the lubrication of rear axles and final drives of commercial vehicles from Mack, MAN, DAF, Mercedes, Iveco, Volvo, Renault Trucks, Mercedes-Benz, with extended drain interval up to 540 000km.
  • Recommended by Total for the following applications: ArvinMeritor O76N, MAN 341-Z2, MAN 342-S1, Volvo 97312, Volvo 97316(GO101), Ford M2C-200C.

 

Specifications:

  • DAF (extended drain for rear axles)
  • MB-Approval 235.8
  • MACK GO-J
  • MAN 3343 type S (ex MAN 3343 type SL)
  • SCANIA STO 1:0
  • ZF TE-ML 02B, 05B, 07A, 12B, 16F, 17B, 19C, 21 B
  • SAE J2360 (n°PRI GL 0432)

Meets the performance requirements of the following international specifications :

  • API GL-4
  • API GL-5
  • API MT-1
  • MIL-PRF-2105E

 

Advantages:

  • Outstanding extreme-pressure and antiwear properties preventing scuffing, wear and pitting of gears and bearings under highly loaded conditions.
  • Excellent resistance to oxidation and high shear stability providing capacity for very extended drain intervals (up to 540 000km) with intact performance.
  • Exceptional filterability and good antifoam behaviour allowing optimal oil flow in the axles and gearboxes.
  • Excellent anticorrosion, antifoam, antirust and dispersivity properties, providing durability benefits.
  • Easy gear shifting as well under cold or hot conditions of use, providing optimal driving confort.
  • Reduction of friction, drag and splash losses providing improvement of the efficiency of the driveline and generating fuel economy: this lubricant has been certified by TUV in 2009: after tests carried out in Millbrook (UK) on a Euro 4 truck , the TUV confirms that the combined use of this product together with a Fuel Economy engine and gear oil help save 3% of fuel on average.

 

Pack sizes available - 18x1ltr, 20ltr, 208ltr drums, bulk delivery

Discover More +
Total Rubia S 50 - Monograde lubricant for Diesel engines - 114238

Total Rubia S 50 - Monograde lubricant for Diesel engines - 114238

 

Applications:

Suitable for gear boxes, torque converters when the manufacturer requires an engine oil with an appropriate grade for these applications.

 

Specifications:

  • API CF/SF

 

Advantages:

  • Monograde
  • High viscosity index
  • High stability in operation
  • Exceptional detergency level
  • Very high dispersancy level
  • Excellent antiwear and anticorrosion properties
  • Excellent antioxydant, antirust and antifoaming properties

 

Pack sizes available - 208ltr drums

Discover More +
Total Rubia S 20W-20 - Monograde lubricant for Diesel engines - 114245

Total Rubia S 20W-20 - Monograde lubricant for Diesel engines - 114245

 

Applications:

Recommended for hydraulic systems when the manufacturer requires an engine oil with an appropriate grade for these applications.

 

Performance:

Specifications:

  • ACEA E2
  • API CF/SF

OEM's Approvals:

  • MERCEDES MB-Approval 228.0
  • MAN 270
  • MIL-L 2104 E

 

Advantages:

  • Monograde
  • High viscosity index
  • High stability in operation
  • Exceptional detergency level
  • Very high dispersancy level
  • Excellent antiwear and anticorrosion properties
  • Excellent antioxydant, antirust and antifoaming properties

 

Pack sizes available - 20ltr, 208ltr, Bulk delivery

Discover More +
Total Transmission TX 75W-90 - Synthetic based oil for gears - 114391

Total Transmission TX 75W-90 - Synthetic based oil for gears - 114391

 

Applications:

- Synthetic based oil designed for the lubrication of all gear boxes and axles requiring an API GL-5 level and a viscosity of SAE 75W-90.

 

Specifications:

  • API GL-5

 

Advantages:

  • Fluid synthetic based multigrade oil.
  • High viscosity index providing a good lubrication and allowing easy gear changes at low as well as high temperatures.
  • Benefits of a low viscosity at low temperature.
  • Very high Extreme-Pressure properties.
  • Excellent stability in service.
  • Excellent wear reducing properties, high oxidation resistance and anti-rust properties.
  • Contributes to protect mechanical parts and improve drivability.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Transmission TI 75W-80 - Semi-Synthetic Gearbox Oil - 115579

Total Transmission TI 75W-80 - Semi-Synthetic Gearbox Oil - 115579

 

High performance semi-synthetic oil for gearboxes.

 

Applications:

  • Semi-synthetic oil for mechanical gearboxes, whether synchronized or non-synchronized, functioning under very severe conditions of load, speed and temperature.
  • Specifically developed for heavy duty ZF gearboxes fitted with an integrated retarder (ZF Intarder), where the thermal constraints are the most severe. Can be recommended for any application requiring an API GL-4 level of performance.
  • Is particularly suitable for extended drain intervals (up to 300 000km), on manual gearboxes of commercial vehicles from Renault Trucks, DAF, MAN, Iveco, and for all vehicles equipped with ZF or Eaton manual gearboxes.

 

Specifications:

  • MAN 341 type Z-3 & E-4
  • Meets the performance requirements of API GL-4, Eaton and Renault Truck gearboxes.

 

Advantages:

  • Very high viscosity index allowing easy cold start and good gear shifting feel under all circumstances.
  • Enhanced extreme-pressure and antiwear properties, for a maximal durability of gears and bearings as well as synchronisers.
  • Excellent antifoam, anticorrosion and antirust properties to allow an optimal and durable functionality of all the gearbox components.
  • Compatible with most synchronizer types.
  • Excellent resistance to oxidation and very good shear stability, allowing the oil to keep its excellent properties intact with time for extended drain intervals up to 300 000 km.
  • Very fluid formulation reducing friction and splash losses, generating remarkable and valuable fuel economy savings to the user.

 

Pack sizes available - 20ltr, 208ltr drums, bulk delivery

Discover More +
Total Transmission RS FE 80W-90 - Semi-Synthetic Gearbox and Axle Oil - 120724

Total Transmission RS FE 80W-90 - Semi-Synthetic Gearbox and Axle Oil - 120724

 

Applications:

  • Semi-synthetic oil with a high viscosity index for the lubrication of gears under severe conditions of use.
  • Designed to meet the challenge of the T.D.L. (Total Drive Line) concept: high performance lubrication of hypoid axles as well as synchronized gearboxes, to simplify maintenance without any compromise on components durability.
  • Is recommended for use on manual gearboxes, rear axles, or any gear assembly requiring API GL-4, API GL-5, API MT-1 or SAE J2360 levels of performance.
  • Allows extended service intervals up to 160 000 km on ZF axles and gearboxes (without Intarder), and more generally on all commercial vehicles hypoid axles.
  • Suitable for use on Scania gearboxes.

 

Specifications:

  • MAN 3343 type M (ex MAN 3343 type ML)
  • ZF TE-ML 02B, 05A, 07A, 12E, 16B, 17B,19B, 21A

Meets the performance requirements of the following international specifications :

  • API GL-4
  • API GL-5
  • API MT-1
  • MIL-PRF-2105E / SAE J2360

 

Advantages:

  • Very good low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Very high extreme-pressure performance for optimal protection of gears and bearings against scoring and scuffing.
  • Excellent antiwear, anticorrosion and antirust properties for the durability of components including gearbox synchronizers.
  • Semi synthetic formulation, very resistant to oxidation and allowing extended drain intervals (up to 160 000 kms) compared to standard mineral.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total TP Max 10w-40 - 3 Functions Lubricant for Public Works - 148701

Total TP Max 10w-40 - 3 Functions Lubricant for Public Works - 148701

 

"3 Functions" lubricant developed for materials used in public works or quarries. TP Max 10w-40, added to TP Trans 80w90, form the concept "Total TP Concept".

 

Applications:

  • TP Max makes it possible to lubricate diesel engines of the last generation, notably the cleaner engines according to the tier 1, 2 or 3 (Euro IIIa) standards. It can lubricate the small gasoline engines and the piston-compressors.
  • TP Max applies in all hydraulic systems, high or low pressure, equipped of very high performance filters, in the inlet or outlet of oil.
  • TP Max lubricates the oldest or current gearboxes, powershift or manual without power take-off or some retarders, which need specific lubricants.
  • TP Max can be used in all seasons due to its high viscosity index:

               - Very fluid at cold temperatures, with easy cold starting of organs with an effective and rapid filtration, even in Winter season.

               - Thich at high temperatures, keep an optimal lubrication and a low oil consumption due to its non-conventional base oil.

 

Properties:

Specifications:

  • API CI-4 / CH-4
  • ACEA E7 / E5
  • GLOBAL DHD-1

Approved by the biggest OEM's: Engine Applications: SAE 10W-40

  • Caterpillar: ECF-1
  • Mercedes: MB page 228.3
  • Volvo: VDS-3
  • Renault: RLD
  • Deutz: DQC II - 05
  • Cummins: 20076 / 20077 / 20078
  • MTU: Cat. 2
  • Man: M 3275

Transmission Applications: API GL-4 / SAE 30

  • Caterpillar TO-2
  • Allison C4 (Old spec.)

Hydraulic Applications:

  • Afnor HV 68 (46/68 in use)
  • ZA TE ML 07C
  • Caterpillar: Hydo

 

Advantages:

  • Allows to cancel the supply of many specific products due to the 3 functions.
  • Reaches the highest quality levels required by the manufacturers for their engines (E7/CI-4), transmissions (GL-4) and hydraulics systems (HV class).
  • Cancels all potentiality of lubricant application errors.
  • Enable longer drain intervals under specific conditions.

 

Pack sizes available - 208ltr drums

Discover More +
Total Transmission SYN FE 75W-140 - Synthetic Gear Oil - 155279

Total Transmission SYN FE 75W-140 - Synthetic Gear Oil - 155279

 

Applications:

  • Very high performance synthetic oil for axles and reduction gears.
  • High loaded gears.
  • Recommended when filters are added to the lubrication system.
  • Recommended for axles requiring API GL-5 level.

 

Specifications:

  • API GL-5
  • SCANIA STO 1:0

 

Advantages:

  • Very high viscosity index.
  • Increased Extreme-Pressure and antiwear properties for an optimised lubrication of hypoïd or non-hypoïd axles.
  • Excellent antifoam, anticorrosion, antirust properties.
  • Excellent thermal stability.
  • Very low loss in viscosity through shear.
  • Excellent stability in service.
  • Extended drain interval.
  • Fuel saving.

 

Pack sizes available - 60ltr, 208ltr drums

Discover More +
Total Transmission XS FE 75W-80 - High performance transmissions lubricant - 164

Total Transmission XS FE 75W-80 - High performance transmissions lubricant - 164856

 

Very high performance lubricant for heavy duty manual and automated transmissions.

 

Applications:

  • Synthetic based lubricant for manual and automated gearboxes, wether synchronised or non-synchronised, running under the most severe conditions of load, speed and temperature.
  • Specifically developed for medium and heavy duty ZF gearboxes fitted with an integrated retarder (ZF Intarder), where the thermal constrains are the most severe. Extensive bench and field testing have been performed successfully , including on the most recent models of ZF gearboxes.
  • Can be recommanded for any application requiring an API GL-4 level of performance..
  • Is particularly suitable for extended drain intervals (up to 540 000km), on transmissions of commercial vehicles from Renault Trucks, DAF, MAN, Iveco, and for all commercial vehicles equipped with ZF manual and automated gearboxes.
  • Has been tested on Volvo manual and automated transmissions and is suitable when a Volvo 97307 level of performance is required.

 

Specifications:

  • ZF TE-ML 01 E/ 02E / 16P
  • MAN 341 type Z-5

Meets the performance requirements of the following international specifications:

  • API GL-4

 

Advantages:

  • Very high viscosity index allowing easy cold start and smooth and efficient gear shifting under all circumstances.
  • Enhanced extreme-pressure and antiwear properties, for a maximal durability of gears and bearings as well as synchronisers.
  • Outstanding oxidation resistance and thermal stability, allowing optimal functionality of all the gearbox components for extended drain intervals up to 540 000 km and more. NB - Compatible with most of synchronizer materials and seals.
  • Very fluid multigrade formulation generating fuel economy savings to the commercial vehicle owner by the limitation of friction, drag and splash losses which affect gearbox efficiency . This lubricant has been certified by TÜV in 2009: after tests carried out in Millbrook (UK) on a Euro 4 truck , the TÜV certified that the combined use of this product together with Fuel Economy lubricants (for engine and axles) help save 3% of fuel on average (up to 6,41%).

 

Pack sizes available - 20ltr, 208ltr drums, 1000ltr IBC, bulk delivery

Discover More +
Total Transmission X4 80W-90 - Multigrade Oil - 166276

Total Transmission X4 80W-90 - Multigrade Oil for limited slip differential, axle and transfer gear box - 166276

 

Applications:

  • Total Transmission X4 is an oil specially designed for the lubrification of axles equipped with limited slip differentials, some classical axles and transfer gear boxes.
  • Suitable for use in all passenger cars and light commercial vehicles when the manufacturer requires an oil with specific friction properties.
  • Total Transmission X4 is recommended by PSA for use in Citroen and Peugeot 4 wheel drive cars and vans.

 

 

Specifications: 

  • API GL-5
  • PSA PEUGEOT CITROEN B71 2375

 

Advantages:

  • High viscosity index.
  • Special friction properties.
  • Very high Extreme-Pressure properties.
  • High heat stability.
  • Excellent wear reducing properties, high oxydation resistance and antirust properties.

 

Pack sizes available - 18x1ltr

Discover More +
Total TP Star Trans 80W-110 - Lubricant for Public Works, Mines or Quarries - 18

Total TP Star Trans 80W-110 - Lubricant for Public Works, Mines or Quarries - 182904

 

Very high performance lubricant specially developped for the lubrication of materials used in Public Works, Mines or Quarries. TP Star Trans 80W-110, together with TP Star Max FE 10W-30, form the “TP Star Concept”.

 

Applications:

  • Total TP Star Trans makes it possible to lubricate front or back strongly hypoid axles and loaded final reductions.
  • Total TP Star Trans is usable in limited slip self-locking disc differentials.
  • Total TP Star Trans permits also the cooling and the good work without vibrations of oil immersed brake systems.
  • Total TP Star Trans can also be used in all types of gearboxes, with mechanical or synchronized shifting.
  • Total TP Star Trans is used all year round, due to its high viscosity index:

                  - very fluid at cold temperature, permits a use of the final drive line, without power losses and with a break capacity immediately available and efficient.
                  - thick at high temperature, keeps an optimal and securized lubrication of loaded organs.

  • In certain application cases, TP Star Trans must be used in conjonction with the Star XL additive (Refer to the Technical Data Sheet).

 

Performance:

Specifications: API GL-5 / GL-4

  • Its “Extreme-Pression” reinforced properties (API GL-5) give it excellent fatigue and wear resistances, specially for gears under load, shocks and high temperatures.
  • Meet the main requirements of the Final Drive specification:

                - CATERPILLAR FD-1 (SAE 50) - CAT FD-1, CAT TO-4

  • TP Star Trans has succeed the official tests of wet brake frictions according to:

                - CATERPILLAR TO-4 (SAE 50)
                - KOMATSU Micro Clutch

  • Its friction characteristics are also adapted for use in axles equipped with limited slip self-locking disc differentials.

 

Advantages:

  • Allows to strongly decrease the lubricant number needed for the whole vehicle park maintenance.
  • Reaches the performance levels required by the machinery OEMs for the severe earth-moving applications.
  • Erases all mistake possibilities of lubricant application, with security.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Biotrans LS FE 75w-90 - Synthetic biodegradable axle lubricant - 174389

Total Biotrans LS FE 75w-90 - Synthetic biodegradable axle lubricant - 174389

 

Very high performance synthetic biodegradable lubricant, coming from renewable raw material, dedicated to final reductions and disc limited slip differential axles.

 

Application:

  • Lubrication of axles equipped with disc limited slip differential systems of Public-Works or Agricultural machinery.
  • Can also be used in classical hypoïd axles, non-equipped with self-locking differential systems.
  • More generally, BIOTRANS LS FE 75W-90 is used in all loaded gear cases (reduction or translation), requesting the use of a reinforced Extreme-Pressure API GL-5 lubricant.
  • Is formulated with renewable modified base oils, conforming to the environnemental criterias of main current labels.
  • Can also lubrify the self-locking differential systems of certain Passenger Cars.

 

Performance:

  • Meets the European Community definition of “Biolubricant”
  • Conform to the International Classifications : API GL-5 and MIL.L 2105D
  • Adapted to the lubrication of axles of the following Earth Moving machinery:
                   LIEBHERR, VOLVO CE, TEREX, CASE NEW HOLLAND, JCB, etc…
  • And also to 4 Wheel-Drive Agricultural tractor Front axles of :
                   CLAAS-RENAULT, STEYR, DEUTZ, SAME, VALTRA, etc…

 

Advantages:

  • Smooth clutching without chocks nor excessive slippage of self-locking friction discs.
  • Thanks to its Extreme-Pressure additives, provides a maximum protection of very loaded gears working with shocks.
  • Good compatibility with transmission organ seals.
  • Specially recommended in case of possible contamination of cultivated land, water, forests and sensitive environments which must be preserved.
  • Its rheological and friction characteristics generate a reduction of the mechanical energy losses in the lubricated organ and then a fuel consumption reduction...

 

Pack sizes available - 20ltr

Discover More +
Total Transmission Gear 9 FE 75w/80 - Transmission Oil - 201602

Total Transmission Gear 9 FE 75w/80 - Transmission Oil - 201602

 

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is synthetic based lubricant for manual and automated gearboxes, whether synchronized or non- synchronized, running under the most severe conditions of load, speed and temperature.

 

Applications:

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is specifically developed for all gearboxes with or without Intarder (for example for the ZF gearboxes with an integrated retarder medium and heavy duty ZF gearboxes (ZF Intarder). Extensive bench and field testing have been performed successfully, including on the most recent models of gearboxes.

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is a lubricant with specification VOLVO 97307 and VOITH Class B, for all applications on manual and automated gearboxes and can be recommended for any application requiring an API GL-4 level of performance.

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is particularly suitable for extended drain intervals (up to 540 000km), on transmissions of commercial vehicles from Renault Trucks, DAF, MAN, Iveco and for all commercial vehicles equipped with ZF manual and automated gearboxes.

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is particularly suitable for latest generation gearboxes with carbon synchronization with specification ZF TE-ML 01E. For Gearboxes with Molybdène synchronisation, the specification ZF TE-ML 02E allows to increase the durability (and maintenance intervals).

TOTAL TRANSMISSION GEAR 9 FE 75W-80 is particularly suitable for the most severe conditions of load like public works, heavy duty transport, etc.

 

International Standards:

  • API GL-4

 

Manufacturers Approvals:

  • ZF TE-ML 01E / 02E / 16P
  • VOITH CLASS B
  • VOLVO 97307
  • MAN 341 type Z-5
  • MB-Approval 235.28

 

Advantages:

  • Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
  • Reduced cost of maintenance: specially formulated to reach extended drain intervals recommended by the manufacturer.
  • Excellent protection of gearboxes against wear and corrosion due to extreme-pressure properties of oil.
  • Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Excellent stability in operation due to high viscosity index.
  • High compatibility with oil filters due to antifoam properties.
  • Improved gear engagement: gear shiftability with a variety of synchroniser materials such as sinter, molybdenum and carbon.
  • Supports rationalisation of products (ZF, VOITH, VOLVO, MAN, MERCEDES BENZ).

 

Pack sizes available - 208ltr barrels, 20ltr drums, 1000ltr IBC's, bulk

Discover More +
Total Transmission Dual 8 FE 80w/90 - Transmission Oil - 201875

Total Transmission Dual 8 FE 80w/90 - Transmission Oil - 201875

 

TOTAL TRANSMISSION DUAL 8 FE 80W-90 is an oil of synthetic based technology with a high viscosity index for the lubrication of gears under severe conditions of use.

 

Applications:

TOTAL TRANSMISSION DUAL 8 FE 80W-90 is designed to meet the challenge of the T.D.L. (Total Drive Line) concept: high performance lubrication of hypoid axles as well as synchronized gearboxes, to simplify maintenance without any compromise on components durability.

TOTAL TRANSMISSION DUAL 8 FE 80W-90 is recommended for use on manual gearboxes, rear axles, or any gear assembly requiring API GL-4, API GL-5, API MT-1 or SAE J2360 levels of performance.

TOTAL TRANSMISSION DUAL 8 FE 80W-90 is suitable for the manual transmission of several OEMs such as MAN, DAF, IVECO and RENAULT TRUCKS with extended drain intervals.

 

International Standards:

  • API GL-4
  • API GL-5
  • API MT-1
  • SAE J2360

 

Manufacturers Approvals:

  • MAN 341 TYPE E2, Z2
  • MAN 342 TYPE M2
  • ZF TE-ML 02B, 05A, 12L, 12M, 16B, 17B, 19B, 21A

 

Advantages:

  • Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
  • Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.
  • Suitable for multi-brand fleet customers: this lubricant adapted for gearboxes and axles of several OEM, thus enabling customers to use this lubricant for the whole fleet.
  • Improved protection of axles and manual gearboxes against wear and corrosion due to extreme-pressure properties of oil.
  • Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Improved stability in operation due to high viscosity index.
  • High compatibility with oil filters due to antifoam properties.

 

Pack sizes available - 208ltr barrels, 20ltr drums

Discover More +
Total Transmission Dual 9 75w/90 - Transmission Oil - 201659

Total Transmission Dual 9 75w/90 - Transmission Oil - 201659

 

TOTAL TRANSMISSION DUAL 9 FE 75W-90 is a synthetic lubricant of extremely high performance developed based on the T.D.L. (Drive Line Total) concept which is suitable for manual gearboxes and axles subjected to severe conditions of use.

 

Applications:

TOTAL TRANSMISSION DUAL 9 FE 75W-90 is high performance synthetic oil developed for synchronized or nonsynchronized manual gearboxes, axles and reduction gears requiring API GL-4, GL-5, MT-1 or MIL-PRF-2105E.

TOTAL TRANSMISSION DUAL 9 FE 75W-90 suits particularly the lubrication of the gears hypoid and axles of most manufacturers such as Mack, MAN, DAF, IVECO, MERCEDES, VOLVO, RENAULT, MACK with extended drain intervals up to 180 000 km.

 

International Standards:

  • API GL-4
  • API GL-5
  • API MT-1
  • MIL-PRF-2105E

 

Manufacturers Approvals:

  • DAF (first fill)
  • MB-Approval 235.8
  • MAN 341 Type E3, Z2
  • MAN 342 Type M3
  • SCANIA STO 1:0
  • VOLVO 97312
  • ZF TE-ML 02B, 05B, 12L, 12N, 16F, 17B, 19C, 21B
  • SAE J2360 (n° PRI GL 0661)

 

Advantages:

  • Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
  • Reduced cost of maintenance: specially formulated to reach extended drain intervals recommended by the manufacturer.
  • Suitable for multi-brand fleet customers: this lubricant adapted for gearboxes and axles of several OEM, thus enabling customers to use this lubricant for the whole fleet.
  • Excellent protection of axles and manual gearboxes against wear and corrosion due to extreme-pressure properties of oil.
  • Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Excellent stability in operation due to high viscosity index.
  • High compatibility with oil filters due to antifoam properties.
  • Supports rationalisation of products (MERCEDES BENZ, MAN, VOLVO, etc).

 

Pack sizes available - 208ltr barrels, 20ltr drums, 18x1ltr bottles, bulk

Discover More +
Total Transmission Gear 7 80w/90 - Transmission Oil - 201293

Total Transmission Gear 7 80w/90 - Transmission Oil - 201293

 

Applications:

TOTAL TRANSMISSION GEAR 7 80W-90 is designed for synchronized and non-synchronized gearboxes, mild loaded axles, transfer boxes and all gears requiring MIL-L-2105 or API GL-4 level.

TOTAL TRANSMISSION GEAR 7 80W-90 is approved by ZF for the lubrication of their gearboxes (without Intarder) with standard drain interval.

 

International Standards:

  • API GL-4

 

Manufacturers Approvals:

  • MAN 341 type E-1 / Z-2
  • ZF TE-ML 16A, 17A, 19A

 

Advantages:

  • Efficient protection of gears against wear and corrosion due to stable extreme-pressure properties.
  • High compatibility with oil filters due to antifoam properties.
  • Efficient stability in operation due to high viscosity index.

 

Pack sizes available - 208ltr barrels, 20ltr drums

Discover More +
Total Transmission Gear 8 FE 75w/80 - Transmission Oil - 201301

Total Transmission Gear 8 FE 75w/80 - Transmission Oil - 201301

 

TRANSMISSION GEAR 8 FE 75W80 is a fuel-economy manual transmission oil for commercial vehicles.

 

Applications:

TRANSMISSION GEAR 8 FE 75W80 is recommended for commercial vehicles with ZF, EATON and certain VOLVO gearboxes. it is also suitable for manual transmissions of most OEM like MAN, IVECO, DAF and RENAULT.

TRANSMISSION GEAR TOTAL 8 FE 75W-80 has approved ZF TE-ML 01L and 02L ensuring compatibility with latest gearboxes equipped with carbon and molybdenum synchronizers.

 

International Standards:

  • API GL-4

 

Manufacturers Approvals:

  • MAN 341 type E-3/Z-4
  • VOLVO 97305
  • ZF TE-ML 01L, 02L, 16K

 

Meets levels of:

  • EATON Europe 300,000km or 3 years

 

Advantages:

  • Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
  • Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.
  • Improved protection of manual gearboxes against wear and corrosion due to extreme-pressure properties of oil.
  • Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Improved stability in operation due to high viscosity index.
  • High compatibility with oil filters due to antifoam properties.
  • Improved gear engagement: gear shiftability with a variety of synchroniser materials such as sinter, molybdenum and carbon.

 

Pack sizes available - 20ltr drums, 18x1ltr bottles

Discover More +
Total Transmission Gear 9 FE 75w/90 - Transmission Oil - 201239

Total Transmission Gear 9 FE 75w/90 - Transmission Oil - 201239

 

TOTAL TRANSMISSION GEAR 9 FE 75W-90 is a fully synthetic gear oil with high performances, developed for gearboxes of trucks.

 

Applications:

TOTAL TRANSMISSION GEAR 9 FE 75W-90 is especially recommended for gearboxes of MERCEDES-BENZ trucks.

 

International Standards:

  • Level API GL-4

 

Manufacturers Approvals:

  • MB-Approval 235.11

 

Advantages:

  • Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
  • Reduced cost of maintenance: specially formulated to reach extended drain intervals recommended by the manufacturer.
  • Excellent protection of manual gearbox against wear and corrosion due to extreme-pressure properties of oil.
  • Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Excellent stability in operation due to high viscosity index.
  • High compatibility with oil filters due to antifoam properties.

 

Pack sizes available - 208ltr barrels

Discover More +
Total Transmission Axle 8 FE 75w/140 - Transmission Oil - 201586

Total Transmission Axle 8 FE 75w/140 - Transmission Oil - 201586

 

TOTAL TRANSMISSION AXLE 8 FE 75W-140 is a very high performance 100% synthetic oil for axles and reduction gears and high loaded gears.

 

Applications:

TOTAL TRANSMISSION AXLE 8 FE 75W-140 is recommended when filters are added to the lubrication system.

TOTAL TRANSMISSION AXLE 8 FE 75W-140 is recommended for SCANIA axles requiring API GL-5 level.

 

International Standards:

  • API GL-5

 

Manufacturers Approvals:

  • SCANIA STO 1:0

 

Advantages:

  • Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
  • Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.
  • Improved protection of axles against wear and corrosion due to extreme-pressure properties of oil.
  • Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Improved stability in operation due to high viscosity index.
  • High compatibility with oil filters due to antifoam properties.

 

Pack sizes available - 208ltr barrels, 60ltr drums

Discover More +
Total Transmission Axle 8 FE 80w/140 - Transmission Oil - 201274

Total Transmission Axle 8 FE 80w/140 - Transmission Oil - 201274

 

TOTAL TRANSMISSION AXLE 8 FE 80W-140 is high performance multigrade oil designed for the lubrication of severely loaded hypoid axles and final reduction.

 

Applications:

TOTAL TRANSMISSION AXLE 8 FE 80W-140 is recommended when filters are added to the lubrication system.

TOTAL TRANSMISSION AXLE 8 FE 80W-140 is particularly suitable for the lubrication axles from SCANIA and ZF, also suitable for Renault Trucks, Volvo and Iveco axles.

TOTAL TRANSMISSION AXLE 8 FE 80W-140 is recommended for manual gearboxes, rear axles, or any gear assembly requiring API GL-5, API MT-1 or SAE J2360 levels of performance.

 

International Standards:

  • API GL-5
  • API MT-1
  • MIL-PRF-2105E / SAE J2360

 

Manufacturers Approvals:

  • SCANIA STO 1:0
  • ZF TE-ML 05A, 12M, 16D, 21A

 

Advantages:

  • Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
  • Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.
  • Improved protection of axles against wear and corrosion due to extreme-pressure properties of oil.
  • Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Improved stability in operation due to high viscosity index.
  • High compatibility with oil filters due to antifoam properties.

 

Pack sizes available - 208ltr barrels

Discover More +
Total Transmission Axle 7 80w/90 - Transmission Oil for Axles - 201286

Total Transmission Axle 7 80w/90 - Transmission Oil for Axles - 201286

 

TOTAL TRANSMISSION AXLE 7 80W-90 is extreme pressure mineral oil for the lubrication of highly loaded gears (axles, final drives, transfer cases, planetary gearboxes) when an API GL-5 level of performance is required.

 

Applications:

TOTAL TRANSMISSION AXLE 7 80W-90 is specially recommended for ZF and MAN hypoid gears, with standard drain interval.

 

International Standards:

  • API GL-5

 

Manufacturers Approvals:

  • ZF TE-ML 12E, 17B, 19B
  • MAN 342 type M-1

 

Advantages:

  • Efficient protection of gears against wear and corrosion due to stable extreme-pressure properties.
  • High compatibility with oil filters due to antifoam properties.
  • Efficient stability in operation due to high viscosity index.

 

Pack sizes available - 208ltr barrels, 20ltr drums, 1000ltr IBC's, bulk, 18x1ltr pack, 3x5ltr pack

Discover More +
Total Transmission Axle 7 85w/90 - Transmission Oil - 201219

Total Transmission Axle 7 85w/90 - Transmission Oil - 201219

 

TOTAL TRANSMISSION AXLE 7 85W-90 is specially recommended for highly loaded gears and all gears requiring API GL- 5 level.

 

Applications:

TOTAL TRANSMISSION AXLE 7 85W-90 is particularly adapted for MAN and MERCEDES hypoïd axles.

 

International Standards:

  • API GL-5

 

Manufacturers Approvals:

  • MAN 342 type M-1
  • ZF TE-ML 16C, 17B, 19B, 21A
  • MB-Approval 235.0

 

Advantages:

  • Efficient protection of gears against wear and corrosion due to stable extreme-pressure properties.
  • High compatibility with oil filters due to anti-foam properties.
  • Efficient stability in operation due to high viscosity index.

 

Pack sizes available - 208ltr barrels, 20ltr drums

Discover More +
Total Transmission Axle 7 85w/140 - Transmission Oil for Axles - 201291

Total Transmission Axle 7 85w/140 - Transmission Oil for Axles - 201291

 

TOTAL TRANSMISSION AXLE 7 85W-140 is a high performance oil developed for axles, highly loaded gears and hypoid axles with double or single reduction requiring API GL-5.

 

Applications:

TOTAL TRANSMISSION AXLE 7 85W-140 is particularly adapted for the lubrication of SCANIA and ZF manual transmission with drain interval based on OEM recommendations.

 

International Standards:

  • API GL-5

 

Manufacturers Approvals:

  • SCANIA STO 1:0
  • ZF TE-ML 05A, 12E, 16D, 17B, 21A

 

Advantages:

  • Efficient protection of gears against wear and corrosion due to stable extreme-pressure properties.
  • High compatibility with oil filters due to antifoam properties.
  • Efficient stability in operation due to high viscosity index.

 

Pack sizes available - 208ltr barrels, 20ltr drums, bulk

Discover More +
Castrol Agri MP Plus 10w/40 - Super universal tractor oil

Castrol Agri MP Plus 10w/40 - Super universal tractor oil

 

One oil that delivers high performance & protection for engine, transmission, wet brake, hydraulic and front axles.

 

Advantages:

  • One oil simplifies servicing, avoiding misapplication.
  • One oil reduces inventory, saving money.
  • Excellent cold start protection reduces engine wear.

 

Product Performance Claims:

API CF-4/SF/GL-4
ACEA E2
MF - M1145
ZF TE-ML 06B*, 07B Meets Ford ESN-M2C-159B
JDM J27
MF - M1144, M1139
May be used where John Deere J20C
Case MS 1207 and Ford M2C 134D, M2C 86B are specified
 
 
Pack sizes available - 208ltr barrels, 20ltr cans
Discover More +