Total Glacelf MDX - Long life antifreeze - 148019
GLACELF MDX is a “long life” antifreeze based upon monoethylene glycol and contains no amines, nitrites or phosphates. When GLACELF MDX antifreeze is mixed with an appropriate quantity of water it becomes a coolant recommended for all cooling circuits in internal combustion engines, especially MTU (all engines), MB (all engines, without limitation) and MAN systems. In accordance with French Decree No. 95-326 of 20th March 1995 concerning the distribution of certain substances containing monoethylene glycol, GLACELF MDX contains an additive to give it a bitter taste as a guarantee against accidental ingestion by children or users. GLACELF MDX figures as a “speciality” in our antifreeze range.
GLACELF MDX is used diluted in demineralised water (< 8F) and forms a permanent coolant that can be used throughout the year.
To obtain a coolant perfectly mixed, it is recommended to mix mechanically the antifreeze with the water.
Protection against freezing depends on the proportion of GLACELF MDX in the water.
It is recommended that the final solution should contain at least 33% by volume of GLACELF MDX. Do not use concentrations above 70%.
Recommended oil change interval: It is recommended that the coolant fluid should be replaced every two years.
GLACELF MDX meets the principal international specifications for antifreezes, as well as those of major manufacturers. AFNOR NFR 15-601, BS 6580
GLACELF MDX is officially approved by the following manufacturers: DAIMLER CHRYSLER: Approval page 325.0, GM-OPEL, MAN 324 Typ NF, MTU - MTL 5048
GLACELF MDX has been acknowledged as satisfactory for use in their engines by the following manufacturers: AUDI, SEAT, SKODA, VW, BMW, PORSCHE, STEYR, VAN HOOL, VOLVO
GLACELF MDX provides an effective solution to the problems of corrosion affecting all materials used in cooling circuits.
GLACELF MDX performs well in the corrosion tests required by the specifications: hot plate and glassware corrosion.
The additives in GLACELF MDX give the coolant fluid:
- A reserve of alkalinity (to neutralise the acids resulting from the combustion gases).
- A resistance to foaming (mainly instability of the foam that might form).
- A compatibility with hard water (maximum 40°F).
The coolant fluids obtained by diluting GLACELF MDX are also inert to elastomeric seals and paints.
Pack sizes available - 208L drums