Castrol Braycote Inertox 2

Castrol Braycote Inertox 2 (previously called Castrol Inertox Heavy) is chemically and thermally one of the most stable lubricants in the Castrol range. Formulated from an advanced synthetic fluid and thickened with a non soap base which is temperature stable and fortified with a blend of additives and lubricating solids for exceptional wear protection.

Braycote Inertox 2 is designed for universal long-term application in anti-friction and plain bearings under hostile ambient conditions. Inert to most corrosive and/or other aggressive media. For rolling and sliding bearings with extended re-lubrication intervals, high temperatures or under hostile ambient conditions such as in:

• Paint drying lines
• Film stretching machines
• Tenter frames for textiles
• Oven carriages in the ceramics industry

For lubrication of seals and friction points inside high vacuum chambers, such as found in the electronics industry. Temperature application range: -25ºC/-13ºF to +260ºC/+500ºF (at higher operating temperatures adequate ventilation must be ensured).

Castrol Braycote Inertox 2 Lubricany Benefites:

• Excellent thermal and chemical stability – ensures the grease can operate in adverse applications and is resistant to:
  • hot and cold water, oils, oil-in-water emulsions
  • inorganic and organic acids, alkaline solutions
  • solvents based on hydrocarbons, e.g. naptha, benzene, toluol, paraffin etc.
  • solvents based on chlorinated hydrocarbons, e.g. trichloroethylene (TRI), perchloroethylene (PER),
  • dichloromethane (methylene chloride) etc.
  • alcohols, ketones (acetone), halogens
  • radioactive radiation (gamma rays)
• High wear protection, excellent lubricating capabilities, good load-carrying capacity, and outstanding pressure resistance lead to longer bearing life, extended lubrication cycles and uninterrupted service
• Extremely low evaporation loss in vacuum systems- ensures continual lubrication
• Non-flammable – grease can be exposed to extreme conditions ensuring safe use
• Good corrosion protection – helps prevent rust and oxidation on metal surfaces

Braycote Inertox 2 should not be mixed with other greases or oils Clean the lubrication surfaces thoroughly with e.g. petroleum ether before application. This product was previously called Inertox Heavy. The name was changed in 2015.

Contact Us 

Product Data Sheet 

Safety Data Sheet