Castrol Edge 0W-20 LL-17 FE+
VISCOSITY - SAE 0w-20
Castrol Edge 0W-20 LL-17 FE+ Fluid TITANIUM - Stronger Under Pressure
Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.
Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.
Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine
Castrol EDGE 0W-20 LL-17 FE+ is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C5, API SP 0W-20 Lubricant.
Castrol EDGE 0W-20 LL-17 FE+ is approved for use in vehicles that require a BMW Longlife-17FE+ 0W-20 lubricant.
Please refer to your owner’s handbook.
Castrol EDGE 0W-20 LL-17 FE+ with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s modern vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE 0W-20 LL-17 FE+:
- Transforms to be strongest when the pressure is highest, protecting your engine
- Reduces power-robbing friction across engine speeds and conditions
- Independently tested at the highest standards for proven performance
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval, even under extreme pressure
- Delivers high levels of fuel efficiency and low temperature
Name | Method | Units | Edge 0W-20 LL-17 FE+ |
Viscosity Index | ASTM D2270 | None | 169 |
Kinematic Viscosity @ 100°C |
ASTM D445 | mm²/s | 8.18 |
Density @ 15°C, Relative |
ASTM D4052 | g/ml | 0.845 |
Flash Point (PMCC) |
ASTM D93 | °C | 236 |
Pour Point |
ASTM D97 | °C | -42 |
ACEA C5
API SP
BMW Longlife-17FE+
Storage:
All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields