Castrol EDGE Professional EC 0w-20 C5
VISCOSITY - SAE 0w-20
Castrol EDGE Professional EC 0w-20 C5 Fluid TITANIUM - Stronger Under Pressure
Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.
Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most.
Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.
* in accordance with the BSI PAS 2060 specification
Castrol EDGE Professional EC 0W-20 C5 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C5 0W-20 lubricant.
Castrol EDGE Professional EC 0W-20 C5 is approved for use in vehicles that require a Jaguar Land Rover engine oil specification STJLR.03.5006 0W-20 lubricant.
Please refer to your owners handbook.
Castrol EDGE Professional EC 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s sophisticated vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE Professional E 0W-20 C5:
- Transforms to be strongest when the pressure is highest, protecting your engine
- Reduces power-robbing friction across engine speeds and conditions
- Independently tested at the highest standards for proven performance
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval even under extreme pressure
- Delivers high levels of fuel efficiency and low-temperature performance
Name | Method | Units | Castrol EDGE Professional EC 0W-20 C5 |
Density @ 15C, Relative | ASTM D4052 | g/ml | 0.8441 |
Viscosity, Kinematic 100C | ASTM D445 | mm²/s | 7.7 |
Viscosity, CCS -35C | ASTM D5293 | mPa.s (cP) | 5450 |
Viscosity, Kinematic 40C | ASTM D445 | mm²/s | 34 |
Viscosity Index | ASTM D2270 | None | 203 |
Ash, Sulphated | ASTM D874 | % wt | 0.8 |
Pour Point | ASTM D97 | °C | -50 |
Flash Point, PMCC | ASTM D93 | °C | 202 |
ACEA C5
ST JLR. 03.5006;
ST JLR. 51.5122
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.