Castrol EDGE Professional LL IV FE 0w-20
VISCOSITY - SAE 0w-20
Castrol EDGE Professional LL IV FE 0w-20 Reduce Friction For Optimal Efficiency
Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance.
Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most.
Castrol EDGE Professional LL IV FE 0W-20 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C5 0W-20 lubricant.
It is also approved for use in vehicles that require a VW 508 00 / 509 00 specification 0W-20 lubricant as well as for use in Porsche vehicles that require a Porsche C20 specification 0W-20 lubricant.
Castrol EDGE Professional LL IV FE 0W-20 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today’s sophisticated vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE Professional Range of Engine Oils:
- Transforms to be strongest when the pressure is highest, protecting your engine
- Reduces power-robbing friction across engine speeds and conditions
- Independently tested at the highest standards for proven performance
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval even under extreme pressure
- Delivers high levels of fuel efficiency and low-temperature performance
Name Method Units Castrol EDGE Professional LL IV FE 0W-20
Density @ 15C, Relative DIN 51757 g/ml 0.84
Viscosity, Kinematic 100C DIN 51562 mm²/s 8.0
Viscosity, CCS -35C (0W) DIN 51377 mPa.s (cP) 4400
Viscosity, Kinematic 40C DIN 51562 mm²/s 43
Viscosity Index DIN ISO 2909 None 165
Pour Point ASTM D97 °C -45
Flash Point, PMCC ASTM D93 °C 196
Ash, Sulphated ASTM D874 % wt 0.76
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.