Castrol Hysol EM 400
Castrol Hysol EM 400 High performance Oil Phase-Multipack Soluble Metalworking Fluid
Castrol Hysol TM EM 400 is the oil phase of the innovative Castrol Multipack metalworking fluid system. Castrol Multipack combines the effectiveness of advanced metalworking fluid performance with the efficiency of managing fluid systems for maximum sump life. Hysol EM 400 is the vegetable oil phase containing advanced lubricity components to
ensure improved tool life and part quality. It is used in conjunction with Boost WP Series, the available water phases containing fluid management components to ensure bacteria control, pH stability and corrosion protection.
Castrol Multipack technology allows for variable concentrations of each phase depending on the severity of the operation. In addition, lower fluid make-up costs are achieved as only depleted components are added back to the metalworking fluid system.
Multi-pack vegetable oil base for machining of steel and aluminium alloys. It should be used only in combination with Boost WP water phase.
Castrol Hysol EM 400 High-performance Oil Phase-Multipack Soluble Metalworking Fluid – Product Advantages:
- Chlorine and nitrite free to fulfil your local legislation, waste treatment and environmental requirements
- Improved environmental compliance with the use of renewable, vegetable oil technology
- Advanced lubrication to extend tool life and improve part finish
- Versatile fluid suitable for a wide range of applications on multiple metals
- Excellent stability in recommended water conditions
- Excellent foam control
- Developed specifically for Castrol Carelube lubrication technology
Mineral oil | 1-20% |
---|---|
Concentration range | 3-15% |
Metal type | Aluminum, Cast Iron, Yellow Metal |
Multi metals suitable | Yes |
Ester/EP additives | Yes |
Formulated without Chlorinated Paraffin | Yes |
Formulated without Boron | No |
Superior biodegredation | No |
Product type | Metal Working Fluids |
Applicable to these sectors | Automotive Manufacture, Machinery, Metal Goods |
Grinding 1-3% Hysol EM 400 + 1.5-2.0% Boost WP Series
Machining 4-8% Hysol EM 400 + 1.5-2.0% Boost WP Series
Water range 100-300 ppm CaCO3
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.