Castrol Magna 68
VISCOSITY - ISO 68
Castrol Magna 68 Bearing, Spindle and Gearbox Lubricating Oil
Castrol Magna grades are a range of high-quality additive-free oils possessing inherently good resistance to oxidation and good demulsification properties.
Castrol Magna lubricating oils are suitable for a variety of applications such as the lubrication of bearings, and spindles and using the heavier viscosity grades, moderately loaded gearboxes.
They may also be used in vacuum pumps and hydraulic systems where an ‘ISO HH’ fluid type is required.
Magna lubricating oils are available in a range of viscosities from 320 cSt for gear lubrication down to 2 cSt for use on fine-clearance high-speed spindles.
The Magna range is fully compatible with nitrile, silicone and fluoropolymer seal materials. Magna is classified as follows: ISO 6743/4 – Type HH
Castrol Magna 68 Bearing, Spindle and Gearbox Lubricating Oil Advantages:
- Highly refined mineral oil makes the product suitable for applications where non-additive oils can be used.
- Good quality mineral oil enables long service life.
- Low pour point provides trouble-free operation in cold conditions.
Storage Information:
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.