Castrol Magnatec 5w-30 A5
VISCOSITY - SAE 5w-30
Castrol Magnatec 5w-30 A5 Protection Against Stop-Start Wear
Today even a normal driver can stop and start as many as 18,000 times a year. And all that idling in traffic or waiting at junctions causes microscopic wear in your engine. In the latest industry test, MAGNATEC STOP-START gives significantly less wear in stop-start operation.
Castrol MAGNATEC STOP-START has intelligent molecules that cling and form a self-healing layer so it’s always ready to protect at each of the critical stages of stop-start driving. In a nutshell, this means instant protection for your engine from the moment you turn the key and every stop-start action.
As tested in the industry OM646LA test
Castrol MAGNATEC 5W-30 A5 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A5/B5, API SN/CF, ILSAC GF-4 or earlier specification 5W-30 lubricant. It is also suitable for use in Ford vehicles that require a 5W-30 lubricant that Meets Ford WSS-M2C913-C/ WSS-M2C913-D specifications.
Castrol MAGNATEC STOP-START technology contains intelligent molecules that: Cling to engine parts when the oil drains down Form a self-healing layer to protect at each of the critical stages of stop-start driving and beyond Are proven to reduce wear in stop-start operation
Castrol MAGNATEC 5W-30 A5 provides superior performance under extremely cold start-up conditions
Name | Method | Units | Castrol MAGNATEC 5W-30 A5 |
Density @ 15C, Relative
|
ASTM D4052 | g/ml | 0.84 |
Viscosity, Kinematic 100C
|
ASTM D445 | mm²/s | 9.6 |
Viscosity, CCS -30C
|
ASTM D5293 | mPa.s (cP) | 4680 |
Viscosity, Kinematic 40C
|
ASTM D445 | mm²/s | 54 |
Viscosity Index
|
ASTM D2270 | None | 164 |
Pour Point
|
ASTM D97 | °C | -39 |
Ash, Sulphated
|
ASTM D874 | % wt | 1.24 |
Flash Point, PMCC | ASTM D93 | °C | 207 |
ACEA A1/B1, A5/B5 API SN ILSAC GF-4 Meets Ford WSS-M2C913-C/ WSS-M2C913-D
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.