Castrol Magnatec Hybrid 5w-30
01736 757002VISCOSITY - SAE 10w-40
Castrol Magnatec Hybrid 5w-30 For Hybrid Engine Vehicles
Hybrid vehicles are different. The engine operates intermittently, swapping to electric power at low speeds to move the vehicle. In typical urban driving, the engine may only be in use for short periods before switching back to electric power so it is often running cooler than a non-hybrid.
Incredibly some hybrid engines can stop, switch to electric and re-start 500,000 times during their lifetime – that‘s 10 times more than a non-hybrid^.
These lower temperatures and many more restart moments create more contamination because without the extra heat from the engine, water and other contaminants remain in the oil.
All these hybrid challenges make it harder for the oil to protect against damaging engine wear.
^ Based on Castrol testing of mild engines representing an estimated 45% of the 2022 global hybrid parc
Castrol MAGNATEC Hybrid 5W-30 is suitable for use in automotive gasoline and hybrid vehicles where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant, including hybrid engines.
Castrol MAGNATEC Hybrid helps protect against the specific issues that challenge hybrid engines. Its unique DUALOCK Technology Clings like a magnet and Locks together, forming a powerful forcefield of wear Protection, providing 50% better protection from low temperature1 and re-start2 engine wear.
Castrol MAGNATEC Hybrid delivers against HYSPEC – Castrol’s new standard for hybrid performance.
1 Tested versus the Sequence IVA API SN wear limit.
2 Tested versus the CEC OM646LA ACEA wear limits.
3 Across critical areas of contaminants, engine intermittency and system efficiency.
| Name | Method | Units | Castrol MAGNATEC Hybrid 0w-20 |
| Density @ 15C, Relative
| ASTM D4052 | g/ml | 0.856 |
| Viscosity, Kinematic 100C
| ASTM D445 | mm²/s | 10.1 |
| Viscosity, CCS -25C (10W)
| ASTM D5293 | mPa.s (cP) | 6000 |
| Viscosity, Kinematic 40C
| ASTM D445 | mm²/s | 60 |
| Viscosity Index
| ASTM D2270 | None | 155 |
| Pour Point
| ASTM D97 | °C | -42 |
| Flash Point, PMCC
| ASTM D93 | °C | 202 |
| Ash, Sulphated | ASTM D874 | % wt | 0.8 |
API SP
ILSAC GF-6
Storage:
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
