Castrol ON EV Transmission Fluid W1
Castrol ON EV Transmission Fluid W1
Castrol ON EV Transmission Fluid W1 is a full synthetic, high-performance, high-efficiency fluid for transmissions with wet e-Motors, i.e., where the e-motor operates immersed in the EV Fluid. It is an advanced EV Transmission Fluid that helps extend the life of the drivetrain system and go further¹ on a single charge. This next-generation transmission fluid has specially developed, low viscosity technology that delivers low electrical conductivity, enhanced system protection and helps the e-motor run cooler, enabling it to operate at high efficiency.
¹vs mass market EV factory fill fluid *Castrol EV Fluids benefits are demonstrated in bespoke testing and development.
FOR PROFESSIONAL USE ONLY
Castrol ON EV Transmission Fluid W1 is a full synthetic, high-performance, high-efficiency fluid for transmissions with wet e-Motors, i.e., where the e-motor operates immersed in the EV Fluid. It is an advanced EV Transmission Fluid that helps extend the life of the drivetrain system and go further¹ on a single charge. This next-generation transmission fluid has specially developed, low viscosity technology that delivers low electrical conductivity, enhanced system protection and helps the e-motor run cooler, enabling it to operate at high efficiency.
¹vs mass market EV factory fill fluid *Castrol EV Fluids benefits are demonstrated in bespoke testing and development.
FOR PROFESSIONAL USE ONLY
ON EV Transmission Fluid W1 Advantages:
- Outstanding di-electrical properties:
- low conductivity
- high resistance
- high breakdown voltage
- Excellent copper corrosion protection
- Excellent pumpability at low operating temperatures
- Exceptional cold flow properties
- Excellent thermal and oxidative stability
- Exceptional temperature reduction through reduced friction
- Very good gear protection
- Excellent thermal properties
*Please check with your vehicle manufacturer for the right type of fluid for your electric vehicle
Name | Method | Units | Professional H 5w-30 |
Density @ 15C, Relative |
ASTM D4052 | g/ml | 0.844 |
Viscosity, Kinematic 100C |
ASTM D445 | mm²/s |
5.2 |
Viscosity, Kinematic 40C |
ASTM D445 | mm²/s | 25.3 |
Viscosity Index |
ASTM D2270 | None | 145 |
Viscosity, Brookfield @ -20C |
ASTM D2983 | mPa.s (cP) | 696 |
Pour Point |
ASTM D97 | °C | -48 |
Viscosity, Brookfield @ -40C (75W) | ASTM D892 | ml7290 | 7290 |
Flash Point COC | ASTM D92 | °C | 210 |
Health & Safety:
Please refer to the relevant health and safety data sheet, a copy of which is freely available to all our customers.
Storage:
All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields