Castrol Perfecto T 46
VISCOSITY - ISO 46
Castrol Perfecto T 46 Turbine oils
The Castrol Perfecto T range of turbine oils is formulated from highly refined mineral base stocks together with rust and oxidation additives to extend their inherent oxidation stability and corrosion protection.
The Perfecto T range is primarily intended for the lubrication of steam turbines because of its resistance to foaming,
demulsification performance and its air release properties. It can also be used in lightly loaded industrial gas turbines
where anti wear performance is not required and turbo machinery where hydrodynamic lubrication prevails.
Specific Grades within the Perfecto T range meet or exceed the requirements of
- BS 489 1999
- DIN 51515 Part 1( L-TD)
- General Electric GEK
- 27070
- 28143A
- 46506E
- Siemens TLV 9013 04
Castrol Perfecto T 46 Turbine oils Product Advantages:
- Extensive performance history
- Low foaming tendency and air release properties
- Good demulsibility and corrosion inhibition performance
Operating temperature | Min. -5°C |
---|---|
Viscosity | 46 mm/s² at 40°C |
Viscosity index | 102 |
Oil type | Mineral |
Product type | Lubricating Oils |
Applicable to these sectors | Chemicals, Machinery, Power Generation, Wind |
The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.