Coolelf Si-OAT Coolant
01736 757002VISCOSITY - Maintenance & Repair
Coolelf Si-OAT -37°C Ready-To-Use Coolant
TOTAL COOLELF SI-OAT is a “very-long-life” coolant made of monoethylene glycol with fast-acting, effective protective properties. It provides a high level of protection against all forms of corrosion, overheating and freezing protecting aluminium water pumps against corrosion, erosion and cavitation whilst preventing the formation of deposits leaving surfaces clean.
TOTAL COOLELF SI-OAT coolant is especially recommended for certain ICEs both for light vehicles (MB and VW group Euro 6 engines), heavy vehicles (MB, MAN, Scania and Cummins Euro 6 engines), public works machinery (Liebherr Euro 6 engines) and agricultural tractors (MTU Claas engines).
- Ensures maximum protection against freezing, until -37°C
- Ready for use, as a mix with demineralized water.
- COOLELF is inert to elastomeric seals and paints.
- Offers great protection properties
- All year-round use
- Long service life
- Retro-applicability
Recommended coolant change interval*: • 500 000 km/4 years when used in trucks • 250 000 km/5 years when used in cars.
Total Coolelf SI-OAT -37°C Ready-To-Use Coolant Advantages:
- Ensures maximum protection against freezing, until -37°C
- Ready for use, as a mix with demineralized water.
- Long Service life
- COOLELF is inert to elastomeric seals and paints
- Offers great protection with very long-term protection against metal corrosion
- All year-round use
- Maximum heat transfer
Recommended coolant change interval*: • 500 000 km/4 years when used in trucks • 250 000 km/5 years when used in cars.
| TYPICAL CHARACTERISTICS | |||
| Appearance | Clear Liquid | ||
| Colour | Liquid | ||
| DENSITY AT 20°C AO PH AT 20°C | KG/L | ASTM D1122 | 1.075 |
| REFRACTIVE INDEX AT 20°C | ASTM D1218 | 1.3871 | |
| AO | mL HCl 0.1N | ASTM D1121 | 9.9 |
| PH AT 20°C | ASTM D1287 | 8.3 | |
| FREEZING POINT | °C | ASTM D1177 | -38 |
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
