ELF EVOLUTION FULL-TECH FE 5w-30
VISCOSITY - SAE 5w-30
ELF EVOLUTION FULL-TECH FE 5w-30 Synthetic Engine Oil
Very high-performance Elf Fuel Economy synthetic technology motor oil intended for lubricating light vehicle engines. Specially formulated to ensure compatibility with post-treatment systems. Recommended in particular for the Diesel engines respecting the EURO V and EURO VI norms about emission reduction. Particularly adapted to Renault’s recent vehicles equipped with Diesel Particulate Filters. For all driving styles, particularly vigorous, and high speeds.
Most recent technology engines
• Recommended in particular for the Diesel engines respecting the EURO IV & EURO V norms about emission reduction.
Adapted to the Diesel Particulate Filter
• Particularly adapted to Renault recent vehicles equipped with Diesel Particulate Filter.
« Vigorous » driving, all times of year
• For all driving styles, particularly « vigorous » and high speeds.
ELF EVOLUTION FULL-TECH FE 5w-30 Synthetic Engine Oil Product Advantages:
- Ensures maximum engine cleanliness, thanks to very good detergent and dispersion properties. Confers to the engines an excellent global wear protection, thanks to its high technology activation.
- Enables, thanks to low rates of Sulphated Ash, phosphorus, and Sulphur (low SAPS), the durability of post-treatment systems (in particular the DPF) that enables high reduction of pollutant emissions.
- Specific formulae enable fuel economy (thanks to the reduction of friction ). 2,1 % at the M111 FE test of ACEA (minimum 1%).
- Contributes to the increase of the intervals between the drains. The interval can rise up to 30,000 km.
- Reduced oil consumption thanks to the use of synthetic base oils of low volatility.
- Ensures outstanding engine longevity, thanks to very high oxidation resistance.
MÉTHOD UNITS SAE GRADE 5W-30 Viscosity at 40°C ASTM D445 mm²/s 68.4 Viscosity at 100°C ASTM D445 mm²/s 12.0 Viscosity index ASTM D2270 – 174 Density at 15°C ASTM D1298 kg / m³ 851 Pour point ASTM D92 °C -36 Flash point ASTM D92 °C 236
International Specifications
- ACEA C4
Manufacturers Approvals
- RENAULT RN0720
- MERCEDES-BENZ MB-Approval 226.51, MB-Approval 229.51
- Meet the requirements of Fiat 9.55535-S4
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.