Elf MOTO 2 RACE

ELF MOTO2 RACE is a lubricant that is particularly recommended for all types of 2-stroke sports scooters and mopeds. The performance of ELF MOTO2 RACE is appropriate for demanding use in amateur motorcycle competitions, while at the same time meeting the requirements for daily use. This lubricant is not pre-diluted. The oil content must be adjusted and mixed with the
fuel chosen to obtain the optimum engine combustion setting in accordance with the constructors’ recommendations.

ELF MOTO2 RACE is a high-tech 100% synthetic lubricant which provides safety and performance for top-of-the-range engines, even in extreme operating conditions. This lubricant has a 100% ESTER-based formula. Its viscosity increases the resistance of the oil film to extreme variations in temperature. This product has successfully undergone severe testing in competition.

• High detergency, engine protection ELF MOTO2 RACE’s detergency additives use their hot properties to work on deposits and ensure that the distribution system is kept clean. Your engine is therefore protected even under the harshest of driving conditions.

• Clean combustion: Metal particles, produced by the deterioration of the additives and fuel are the cause of deposits. ELF MOTO2 RACE burns without deposits being formed (clean combustion).

• Controlled wear: Clogging of the piston top grooves limits piston ring flexibility (sticking) and results in insufficient oil supply. Friction of the piston rings against the liner tears off metal particles, causing piston scuffing until it seizes. This oil ensures that your engine is kept optimally lubricated in order to prevent this phenomenon of premature wear.

Test                                                         Unit                    Result
Density at 15°C                                   kg/m3                    911
Sulphated ash content                    % weight                 0.02
Kinematic viscosity at 40°C             mm2/s                   101
Kinematic viscosity at 100°C           mm2/s                   14.1
Pour Point                                               °C                         -48
OC Flash Point                                       °C                         270
Colour                                                        –                         Blue

Recommendations for use:

Before using the product, the vehicle’s user guide should be checked. This lubricant has been designed to lubricate 2-stroke engines fitted with independent greasing systems or for use as part of a mixture in percentages recommended by the manufacturer.

The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations.

If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.

Health, safety and the environment:

Based on the toxicological information available, this product should not cause any adverse health effects, provided it is used for its intended purpose and in accordance with the recommendations laid out in the Safety Data Sheet. This can be obtained on request from your local reseller and is available for consultation at www.quickfds.com.

This product should not be used for any purposes other than the ones for which it is intended. When disposing of the product after use, please protect the environment and comply with local regulations.

Health & Safety:

Please refer to the relevant health and safety data sheet, a copy of which is freely available to all our customers.

Storage:

All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet