Elf MOTO 4 ROAD 10w-40

Elf MOTO 4 ROAD 10w-40 – 4-Stroke Motorcycle Engine Oil recommended for all types of 4-stroke motorcycle & scooter engines.

ELF MOTO4 ROAD 10W-40 is a lubricant that is particularly recommended for all types of 4-stroke engine motorcycles, in compliance with the API SN and JASO MA2 international standards.

ELF MOTO4 ROAD 10W-40 is perfectly compatible with catalytic converters. The oil-change intervals recommended by the
constructors and the minimum required viscosities must be complied with. This lubricant is compatible with lead-free fuels. This
multi-purpose lubricant meets the severe requirements of urban traffic and long-distance runs.

ELF MOTO4 ROAD 10W-40 is fortified with synthetic-based oils, providing hydrodynamic lubrication and superior engine
cleanliness.

ELF MOTO4 ROAD 10W-40 has a specific reactivity to temperature variations. Its maximum fluidity at low temperatures improves
injection and ensures that oil pressures rise quickly.

• Viscosity controlled in relation to temperature: ELF MOTO4 ROAD 10W-40’s additives thicken the oil at high temperatures and give it fluidity at low temperatures. The correct oil film is obtained by controlling the viscosity in accordance with temperature using Viscosity Index Improvers. ELF MOTO4 ROAD 10W-40 viscosity incorporates superior lubrication performance, ensuring easy cold start-ups, fast oil pressure rises and low friction between moving engine components.

• Piston ring sealing, power gains: ELF MOTO4 ROAD 10W-40 reduces piston ring groove fouling for optimum sealing during combustion. This ensures that the engine retains its full power.

• Oxidation resistance: ELF MOTO4 ROAD 10W-40 has anti-oxidant additives which neutralise and slow down the oxidation process. This prolongs the lubricant’s lifetime and keeps the oil fluid and efficient. It remains homogeneous and its acidity level scarcely changes.

• Anti-clutch slippage, disk protection: Because of their molecular structure, the base oils are able to form a homogenous film between the clutch disks. The friction factor is adapted to mechanical requirements, preventing clutch slippage and premature disk wear.

Test                                                          Unit           Result
Viscosity grade                                         –             10W-40
Density at 15°C                                    kg/m3           864
Kinematic viscosity at 40°C             mm2/s            96
Kinematic viscosity at 100°C           mm2/s          14.2
Viscosity index                                         –                  151
Pour Point                                               °C                 -33
OC Flash Point                                       °C                 236

International classifications

Recommendations for use:

Before using the product, the vehicle’s user guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations.

The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations.

If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.

Health, safety and the environment:

Based on the toxicological information available, this product should not cause any adverse health effects, provided it is used for its intended purpose and in accordance with the recommendations laid out in the Safety Data Sheet.

This product should not be used for any purposes other than the ones for which it is intended. When disposing of the product after use, please protect the environment and comply with local regulations.

Health & Safety:

Please refer to the relevant health and safety data sheet, a copy of which is freely available to all our customers.

Storage:

All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet