Elf MOTO brake Fluid DOT4

Elf MOTO brake Fluid DOT4 – High-performance brake fluid. Stable and incompressible at all temperatures, it provides optimum safety. Miscible with all other chemical synthetic fluids of the
DOT 3, DOT 4 and DOT 5.1 type with the exception of silicon DOT 5 fluids and all the fluids with a mineral basis (special LHM fluids and others).

• This brake fluid has good fluidity at low temperatures and excellent cold temperature resistance.
• Its viscosity is suitable for normal and high temperatures.
• Compatible with natural and synthetic rubber components used in systems.
• The fluid is not corrosive for the metals used in the systems (tested on tinned metal, steel, aluminium, cast iron, brass, copper).
• Low evaporation and high resistance to the formation of deposits and gums.

Elf MOTO brake Fluid DOT4 – High-performance brake fluid. Stable and incompressible at all temperatures, it provides optimum safety, particularly suitable for braking systems operating under very harsh conditions. Miscible with all other chemical synthetic fluids of the DOT 3, DOT 4 and DOT 5.1 type with the exception of silicon DOT 5 fluids and all the fluids with a mineral basis (special LHM fluids and others).

• This brake fluid has good fluidity at low temperatures and excellent cold temperature resistance.
• Its viscosity is suitable for normal and high temperatures.
• Compatible with natural and synthetic rubber components used in systems.
• The fluid is not corrosive for the metals used in the systems (tested on tinned metal, steel, aluminium, cast iron, brass, copper).
• Low evaporation and high resistance to the formation of deposits and gums.

Density at 20° 1.05 kg/dm^3
Kinematic viscosity at -40 °C (max) 1800 mm2/s
Kinematic viscosity at 100 °C (min) 2.3 mm2/s
Boiling point (min) 230 °C
Boiling point after humidity absorption (min) 155 °C

Exceeds the latest requirements of international standards:
– SAE J 1704
– FMVSS 116 (DOT 4)

Health & Safety:

Please refer to the relevant health and safety data sheet, a copy of which is freely available to all our customers.

Storage:

All packages should be stored under cover. Where outside storage is unavoidable, drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Products should not be stored above 60°C or exposed to hot sun or freezing conditions.

Contact Us

Product Data Sheet

Safety Data Sheet