Industrial Gear Oils

BP Energol GR-XP 460
Brand Logo

VISCOSITY - ISO 460

BP Energol GR-XP 460 Gear Oil

open
DESCRIPTION

The BP Energol GR-XP gear oil range of high-quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load-carrying capacity. The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gearboxes

open
APPLICATIONS

The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm-type gear applications. They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.

open
ADVANTAGES

BP Energol GR-XP 460 Gear Oil Product Advantages:

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics mean reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment

* ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions

open
TYPICAL CHARACTERISTICS
open
APPROVAL & PERFORMANCE CLAIMS

Energol GR-XP is classified as follows:

DIN Classification is CLP

Energol GR-XP grades meet the requirements of:

DIN 51517 Part 3

AGMA 9005 – D94

US Steel 224

David Brown Type E

Hansen Transmissions

Flender

open
ADDITIONAL INFORMATION

The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally to avoid any contamination from water and to prevent the product’s label from rubbing off.

Contact Us 

Product Data Sheet

BP Energol GR-XP 460 Transmission Oil
PACK SIZES AVAILABLE

Request a quote for this product