Quaker Houghton Cindolube 3100

Quaker Houghton Cindolube 3100 is based on hydro treated mineral oil with low aromatic content. A combination of polar additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
CINDOLUBE 3100 is free from Chlorine, Sulphur, Phosphorous and heavy metals (Zinc)

CINDOLUBE 3100 can de used for drawing and blanking operation of yellow metals and aluminium alloys e.g. for electrical conductors.
CINDOLUBE 3100 is also used as neat cutting oil for fine machining operations.

• Reduced cost – higher production rates due to strong lubricity
• Reduced cost – clean workshop environment due to less oil mist and evaporation
• Satisfied staff – good EHS profile, reduced smell and oil mist
• Satisfied staff – light color for good monitoring of the operation

• Colour – pale yellow
• Specific Gravity@ 20 °C kg/m³ – 840
• Kinematic Viscosity @ 40°C, mm²/s  – 7
• Flash Point COC °C  – 130
• Pour Point ℃  –  -21
• Copper Corrosion  –  1b

Quaker Houghton Cindolube 3100 is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective.
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907 /2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67 /548/EEC or 1999/45/EC.

For further information on this product or current substitutes, please Contact Us.