CUT-MAX T 600 is based on HC hydro crack base oil technology with very low aromatic content A combination of polar, extreme pressure and anti-wear addives provide the oil with high load carrying properties.
CUT-MAX T 600 The oil provides good surface finish of the machined work pieces. The oil is free from zinc, chlorine and active sulphur.

CUT-MAX T 600 is designed for gun drilling operations of small diameters, as e.g. in crank shaft It is mainly used when sulphur additives could disturb following processes.
CUT-MAX T 600 is used for machining operation for materials with up to 1050 N/mm2 tensile strength. It is also suitable for broaching of yellow metals.

o Increased productivity – high removal rates
o Secure handling – high EHS standard
o Secure handling – universal product

• Colour – yellow
• Specific Gravity@ 20 °C kglm3 – 890
• Kinetic Viscosity@ 40°C, mm2/s –  10
• Flash Point CDC °C – 155
• Pour Point °C –  – 16
• Copper Corrosion – lb

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life_ Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and 40°( unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.