Quaker Houghton Cut-Max DC 20.01

CUT-MAX DC 20 is based 011 hydro-treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load-carrying properties. The oil provides a good surface finish for the machined work pieces. The oil is free from chlorine and active sulphur

CUT-MAX DC 20 is a versatile product for general machining of yellow metals, aluminium, steel and cast iron.
This product is typically used for the turning of brass bars on swiss type automatic lathes.

o Increased productivity – long tool life
o Reduced cost – energy saving
o Reduced cost – long sump life

• Colour – amber
• Specific Gravity@ 20 ℃ kg/m³ – 870
• Kinetic Viscosity @ 40°C, mm²/s – 20
• Flash Point CDC °C – 185
• Pour Point °C  – -15
• Copper Corrosion – 1a

This lubricant is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°( unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.

For further information on this product or current substitutes, please Contact Us.