Quaker Houghton Cut-Max HO 5
VISCOSITY - ISO 5
Quaker Houghton Cut-Max HO 5 Neat Honing and Grinding Oil
CUT-MAX H 05 is based on hydro-treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load-carrying properties. The oil provides a good surface finish for the machined work pieces and is chlorine-free.
CUT-MAX H 05 is used as honing and lapping oil with all kind of abrasives.
It has a very high flushing power to clean honing and finishing stones.
o Increased productivity – long tool life
o Reduced cost – energy saving
o Reduced cost – long sump life
- Colour – yellow
- Specific Gravity@ 20 °C kglm3 – 850
- Kinetic Viscosity@ 40°(, mm2/s – 5
- Flash Point COC °C – 135
- Pour Point °C – -15
- Copper Corrosion – 1a
This lubricant is used neat as supplied.
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and 40°( unless otherwise specified. Use stock in delivery rotation.
Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.
For further information on this product or current substitutes, please Contact Us.