CUT-MAX SE 4 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
CUT-MAX SE 4 can be used with all standard electrode materials such as copper or graphite.

CUT-MAX SE 4 is a high viscosity spark erosion oil, for roughing. The product also shows a good flushing performance in very small erosion slots. A surface roughness of 3 µm or lower is possible.
CUT-MAX SE 4 can be also used for grinding cutting tools {cemented carbide), and as low viscous spindle oil e.g. for riarrow fit spiridles arid as magnaflux inspection oil.

o Reduced cost – long sump life
o Increased productivity – high removal rates
o Operator friendly – light colour and reduced smell.

• Colour  –  colourless
• Specific Gravity@ 20 ℃kg/m³  – 820
• Kmetic V1scos1ty@ 40℃, mm²/s  –  4
• Flash Point CDC ℃ –  120
• Pour Point ℃ – -20
• Cop per Corrosion – 1a

CUT-MAX SE 4 is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock iri delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.