Quaker Houghton Cut-Max T 400
VISCOSITY - ISO 14
Quaker Houghton Cut-Max T 400 Neat Cutting Oil
CUT-MAX T 400 ZF is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
CUT-MAX T 400 ZF contains active sulphur and may discolour yellow metals. The oil is chlorine free
CUT-MAX T 400 ZF is the ideal oil for machine shops specialising in deep hole drilling using a variety of machines and materials. Product is suitable for drilling diameters from 6-30 mm.Typical applications include drilling of fuel injection pumps and steering racks with TBT equipment.
CUT-MAX T 400 ZF is also suitable for aerospace and defence industries for the deep drilling of hard metals, lnconel, and titanium.
Approved for use on TBT machines
o Increased productivity – high removal rates
o Increased productivity – long tool life
o Reduced cost – long sump life
- Colour – amber
- Specific Gravity@ 20 °C kg/m³ – 800
- Kinetic Viscosity @ 40°C, mm²/s – 14
- Flash Point COC °C – 160
- Pour Point ℃ – -16
- Copper Corrosion – 4c
CUT-MAX T 400 ZF is used neat as supplied.
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.
Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.
For further information on this product or current substitutes, please Contact Us.