CUT-MAX V 509 is based on synthetic esters from renewable sources. Due to the small amount of unsaturated fatty acids the product shows high hydrolytic ond oxidation stability. It is compatible with 2 component paints and seal material as used for HEES hydraulic oils.
CUT-MAX V 509 The oil is free of chlorine, sulphur, aromatic hydrocarbons, zinc and phosporous.

CUT-MAX V 509 is used for general machining as well as for grinding and honing operations
CUT-MAX V 509 is due to absence of chlorine, sulphur and phosphorus components especially suitable for the machining of parts for nuclear power plants.

o Increased productivity – high removal rates
o Reduced cost – clean machines
o Secure handling – high EHS standard
o Secure handling – clean working environment

• Colour – yellow
• Specific Gravity @ 20℃  kg/m³  – 870
• Kinetic Viscosity@ 40°C, mm²/s – 9
• Flash Point COC ℃ – 220
• Pour Point °C  – n.d.
• Copper Corrosion  – 1a

CUT-MAX V 509 is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°C unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.