Houghton Garia 2600 M-32
VISCOSITY - ISO 32
Houghton Garia 2600 M-32 Neat Cutting Oil
GARIA 2600 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
GARIA 2600 M-32 contains active sulphur and may discolour yellow metals. The oil is zinc and chlorine free.
GARIA 2600 M-32 is recommended for machining of high alloyed steels, stainless, heat resistant or austenitic steels and aluminium or magnesium alloys.
GARIA 2600 M-32 shows excellent results by working with many difficult operations like drilling, tapping, shaping or shaving of gears.
Very good results are achieved for the machining of aerospace materials.
o Increased productivity – high removal rates
o Increased productivity – long tool life
o Reduced cost – energy saving
- Colour – amber
- Specific Gravity@ 20 ℃ kglm-‘ – 890
- Kinetic Viscosity@ 40℃, mm2/s – 32
- Flash Point CDC ℃ – 200
- Pour Point ℃ – -12
- Cop per Corrosion – 4c
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and 40°( unless otherwise specified. Use stock in delivery rotation.
Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.
For further information on this product or current substitutes, please Contact Us.