GARIA 404 M-10 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
GARIA 404 M-10 contains active sulphur and may discolour yellow metals. The oil is zinc and chlorine free.

GARIA 404 M-1 O is a classical deep drilling oil for material of medium to high tensile strength.
GARIA 404 M-1 O is also used as grinding oil for ceramic and CBN grinding wheels, internal grinding of e.g. CV-joints as well as external grinding e.g. shaft of Nimonic valves.

Approved by TBT

o Increased productivity – high removal rates
o Reduced cost – long sump life
o Secure handling – high EHS standard

• Colour – yellow
• Specific Gravity@ 20 °C kglm3 – 870
• Kinetic Viscosity@ 40°C, mm2/s – 10
• Flash Point COC ℃ – 165
• Pour Point °C – -16
• Copper Corrosion – 4b

GARIA 404 M-10 is used neat as supplied.

RELATED PRODUCTS
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

STORAGE
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and 40°( unless otherwise specified. Use stock in delivery rotation.

HEALTH AND SAFETY
Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.