GARIA 498 F-10 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
GARIA 498 F-10 contains active sulphur and may discolour yellow metals. The oil is zinc and chlorine free.

GARIA 498 F-1 O is neat cutting oil for deep drilling in light to medium alloyed steel and cast iron.
GARIA 498 F-1 O is also suitable for general machining where low viscosity is required.

o Increased productivity – high removal rates
o Increased productivity – long tool life
o Reduced cost – energy saving

Colour – amber
Specific Gravity@ 20 ℃ kg/m3 – 870
Kinetic Viscosity @ 40°C, mm2/s – 10
Flash Point CDC °C  – 160
Pour Point °C  – -16
Copper Corrosion  – 4b

RELATED PRODUCTS
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.

STORAGE
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and 40°( unless otherwise specified. Use stock in delivery rotation.

HEALTH AND SAFETY
Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.