Quaker Houghton Garia 601 M-22
Neat Cutting and Grinding Oil
GARIA 601 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
GARIA 601 M-22 contains active sulphur and may discolour yellow metals. The oil is zinc and chlorine free.
GARIA 601 M-22 is a high performing universal neat cutting oil for medium to very high alloyed steel, cast iron and aluminium.
GARIA 601 M-22 is suitable for all kind of gear machining, for automatic turning lathes and for light to medium severe broaching operations.
o Increased productivity – long tool life
o Increased productivity – high removal rates
o Reduced cost – long sump life
o Secure handling – high EHS standard
- Colour – amber
- Specific Gravity@ 20 °C kglm3 – 870
- Kinetic Viscosity@ 40°C, mm2/s – 22
- Flash Point CDC °C – 190
- Pour Point °C – -12
- Copper Corrosion – 4c
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and 40°( unless otherwise specified. Use stock in delivery rotation.
HEALTH AND SAFETY
Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.