HOUGHTO-DRAW TD 51 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.
HOUGHTO-DRAW TD 51 contains Chlorine and is free from Sulfur and Heavy Metals (Zinc)

HOUGHTO-DRAW TD 51 is used for tube drawing and pilgering and other severe deformation of most severe machinable materials as stainless steel.
HOUGHTO-DRAW TD 51 is also suitable for non ferrous materials as brass or copper.

o Reduced cost – improved tool life due to high EP power
o Reduced cost – less energy consumption due to high EP and I ubricity
o Reduced cost – easy to be washed off with standard cleaners
o Reduced cost – higher production rates due to strong lubricity

• Colour  – yellow
• Specific Gravity@ 20 °C kglm133 – 1080
• Kinematic Viscosity @ 40°C, mm2/s – 155
• Flash Point COC °C – 220
• Pour Point ℃ – -6
• Cop per Corrosion  – 1b

RELATED PRODUCTS
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective.
For more information, please contact your local Houghton representative.

STORAGE
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°( unless otherwise specified. Use stock in delivery rotation.

HEALTH AND SAFETY
Safety data sheets are available in accordance with Regulation (EC) No 1907 /2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67 /548/EEC or 1999/45/EC.