Quaker Houghton Macron 205 M-5

MAC RON 205 M-5 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces
MACRON 205 M-5 is chlorine, zinc and sulphur free.

MACRON 205 M-5 is a universal honing, superfinishing and grinding oil. Typical application is in the bearing industrie and electronic industry for fine machining of aluminium and yellow metals.
MAC RON 205 M-5 shows also good performance for the edge grinding of e.g. glass lenses or flat glass.

o Increased productivity – high removal rates
o Increased productivity – long tool life
o Reduced cost – clean machines

• Colour – yellow
• Specific Gravity @ 20 cc kglm3 – 830
• Kinetic Viscosity@ 40°C, mm21s –  5
• Flash Point COC cc –  125
• Pour Point °C – -15
• Copper Corrosion – 1a

RELATED PRODUCTS
For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective
For more information, please contact your local Houghton representative.
STORAGE
Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life_ Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°( and 40°( unless otherwise specified. Use stock in delivery rotation.
HEALTH AND SAFETY
Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.

For further information on this product or current substitutes, please Contact Us.