MACRON EDM 130 is based on hydro treated mineral oil with 1011v aromatic content. A cornbination of polar, extreme
pressure and anti-wear additives provide the oil with high load
carrying properties. The oil provides good surface finish of the
machined work pieces.
MACRON EDM 130 can be used with all standard electrode materials such as copper or graphite.

MAC RON EDM 130 is a high viscosity spark erosion oil, for roughing. The product also shows a good flushing performance in very small erosion slots. A surface roughness of 3 µm or lower is possible.
MACRON EDM 130 can be also used for grinding cutting tools (cemented carbide), and as low viscous spindle oil e.g. for narrow fit spindles and as magnaflux inspection oil.

o Increased productivity – high removal rates
o Reduced cost – long sump life
o Secure handling – high EHS standard

• Colour – colourless
• Specific Gravity@ 20 °C kglm3 – 820
• Kinetic Viscosity @ 40°C, mm2/s –  4
• Flash Point C OC °C – 135
• Pour Point °C – -20
• Copper Corrosion – 1a

MACRON EDM 130 is used neat as supplied.

For best results we recommend the use of the Houghton range of industrial lubricants, cleaners and corrosion protective.
For more information, please contact your local Houghton representative.

Please refer to section 7 of Safety Data Sheets for handling and storage information, including product shelf life. Product should be stored under cover in clean, dry conditions and protected from frost. Recommended storage temperature is usually between 5°C and 40°( unless otherwise specified. Use stock in delivery rotation.

Safety data sheets are available in accordance with Regulation (EC) No 1907/2006 Annex II where a substance or preparation meets the criteria in accordance with Directives 67/548/EEC or 1999/45/EC.